Originally Posted by Boost240
Just want to confirm that you have 360 rad up top and you were still able to fit the back fan in. Also, the mod to fit the fans above the rad, was it hard to fo? And what about how restrictive the top outlet is? Did it have any negative effects? Thanks.
The back fan fits fine. I'm actually going to take it out since it doesn't fit the colors of the build.
The top fan mod is IMHO a 5-6/10 in the "hard" scale as long as you have the correct tools. all you need is either a metal cutting wheel, ruler, some sort of writing tool to mark ( I used a pastel liquid chalk pen), and various levels of grit sandpaper. If you don't have these tools, you could use an electric dremel ( one that plugs in, not the battery operated one) and a handful of "decent" quality metal cutting wheels.
As for temps so far my GPUs hasn't changed from my last loop, synthetic benches and gaming it ranges from 40-45c, for the CPU in synthetic benches and gaming it hovers 50-55c. I'm currently playing Overwatch as I type and my GPUs are at 47/42c respectively and my CPU is at 40c, I've been playing for at least 2 hours now. So it's safe to say that the heat soak from the radiators has already set in and the temps are already where they would be at max.
Personally I do agree that the top fans are a tad bit restricted since there is probably less than 1 inch of space for the air to move out of the vents in the top panel but it doesn't seem to make a difference.