Originally Posted by krutoydiesel
Beautiful build as the usual TCO, but the tube from GPU to CPU driving me crazy. I know you aren't a fan of bending, but cmoooonnnnnn! That blue pops so nicely against the other components. Reminds me of Nuka Cola.
I understand to a degree. I think this picture best describes what I had to do.
This shows you that the holes from the CPU to GPU were offset about 1 1/2"
I only had 1 x 19" Tube left of Bitspower Crystal link (I know I could have ordered more, but this was a client build)
So I cut the 19" tube in half. I had to trim a good 3" total of of each tube and bend them as close as possible to resemble each other. I was ultimately able to complete the loop because of the way these two tubes were bent.
It may "Look" odd, or somewhat out of place, but in retrospect, when I had completed bending the tubes, I knew 100% they needed to be this way. My other option were 90degree angled fittings, and that wasn't part of the build
I hope this helps ease your mind a tad
EDIT: And for anyone out there not sure about speaking their mind, I am always open to criticism.
I may not change anything due to what someone tells me, but I certainly listen to feedback, for one day, it may help someone or myself in the next project.
I am not a professional.Edited by TheCautiousOne - 6/15/16 at 8:46am