Originally Posted by fat4l
what about voltage bro?
Also. Have you tried using curve in afterburner? It should affect voltage too. Ctrl F in ab
Also. Any guide you used for flashing? I only flashed amd cards before. I have FE now. Thx
I am attaching the nvflash I have been using and its working great. I would extract it and place the nvflash folder in your C:\ and then launch an admin command prompt.
nvflash -6 whatever.rom
press y when prompted and reboot to apply the changes, you can also hit tab to complete filenames in dos if you are not aware of that.
Thanks for the tip on the ctrl-f I did not know that was there. I am unable to control the power limit or temp limit with the strix bios on my FTW in afterburner but as the temps go up the voltage goes up as well, which is interesting because with my FTW it is the opposite when my temps keep going up my voltage slowly drops along with my clockspeeds. I was seeing if there was anything in the afterburner config files to enable the k boost or sliders even with the strix bios, but did not make any progress on that.
I am going to reboot to my strix bios again in a min and do some more testing, was trying to see how hard I could push things in the slave FTW bios again just for a baseline.
nvflash.zip 1167k .zip file