Overclock.net › Forums › Graphics Cards › NVIDIA › [Official] NVIDIA GTX 1080 Owner's Club
New Posts  All Forums:Forum Nav:

[Official] NVIDIA GTX 1080 Owner's Club - Page 502

post #5011 of 11183
Quote:
Originally Posted by KillerBee33 View Post

I really wanted to slap an H90 for it's 140mm but couldnt resist when EVGA sent me 10Series Hybrid available redface.gif

The pump matters A LOT with these AIO's. The EVGA pump for the Hybrid Kit is the best one for GPU's.

Saw a write up about it somewhere. The Hybrid Kit was by far the most efficient cooler. Not the best... the most efficient... Hehe.
post #5012 of 11183
Running Corsair bracket and H115i on TitanX Maxwell with no problems. I think the bracket needs only some slight modification to fit Pascals...
post #5013 of 11183
Quote:
Originally Posted by nexxusty View Post

The pump matters A LOT with these AIO's. The EVGA pump for the Hybrid Kit is the best one for GPU's.

Saw a write up about it somewhere. The Hybrid Kit was by far the most efficient cooler. Not the best... the most efficient... Hehe.
I can honestly say a 980 @ 1557 @ 1.25V @ 380 Max Power topped out @ 60 MAX even with room being hot as hell around 80 wink.gif So EVGAs Hybrid isn't a bad way to go.
Edited by KillerBee33 - 8/11/16 at 4:30pm
Oculus SetUp
(16 items)
 
   
CPUMotherboardGraphicsGraphics
Intel® Core™ i7-6700K MSI Z170A Gaming Pro Carbon NVIDIA TitanX Pascal MSI GTX 1080 FE SOLD 
GraphicsRAMHard DriveHard Drive
NVIDIA GTX 980 FE SOLD CORSAIR Vengeance LPX 16GB (2 x 8GB) 288-Pin DD... SAMSUNG 840 Pro Series 2.5" 256GB  Mushkin Enhanced Reactor 2.5" 1TB SATA III MLC ... 
CoolingCoolingOSMonitor
Swiftech H320 X2 Plus Alphacool 240 in Push Pull NZXT GRID Fan Controller + CAM Softrware Microsoft Windows 10 Pro 64-bit Toshiba 50L3400U 50-Inch 1080p 60Hz Smart LED TV 
MonitorKeyboardPowerCase
Oculus Rift Logitech Wireless Touch Keyboard K400 with Buil... RMi Series™ RM650i — 650 Watt 80 PLUS® Gold Cer... NZXT H440 Razer Edition 
CPUMotherboardGraphicsGraphics
6820HK MSI GTX 1070 GTX 1070 
RAM
16GB DDR4 
  hide details  
Reply
Oculus SetUp
(16 items)
 
   
CPUMotherboardGraphicsGraphics
Intel® Core™ i7-6700K MSI Z170A Gaming Pro Carbon NVIDIA TitanX Pascal MSI GTX 1080 FE SOLD 
GraphicsRAMHard DriveHard Drive
NVIDIA GTX 980 FE SOLD CORSAIR Vengeance LPX 16GB (2 x 8GB) 288-Pin DD... SAMSUNG 840 Pro Series 2.5" 256GB  Mushkin Enhanced Reactor 2.5" 1TB SATA III MLC ... 
CoolingCoolingOSMonitor
Swiftech H320 X2 Plus Alphacool 240 in Push Pull NZXT GRID Fan Controller + CAM Softrware Microsoft Windows 10 Pro 64-bit Toshiba 50L3400U 50-Inch 1080p 60Hz Smart LED TV 
MonitorKeyboardPowerCase
Oculus Rift Logitech Wireless Touch Keyboard K400 with Buil... RMi Series™ RM650i — 650 Watt 80 PLUS® Gold Cer... NZXT H440 Razer Edition 
CPUMotherboardGraphicsGraphics
6820HK MSI GTX 1070 GTX 1070 
RAM
16GB DDR4 
  hide details  
Reply
post #5014 of 11183
Quote:
Originally Posted by nexxusty View Post

Hmm.... H105 eh?

Try to find some reviews that have h110i GT and H105 on the same chart, there aren't too many, but the ones I found showed H110i with and advantage on low fan speeds and H105 when fans are faster.
post #5015 of 11183
Quote:
Originally Posted by toncij View Post

Running Corsair bracket and H115i on TitanX Maxwell with no problems. I think the bracket needs only some slight modification to fit Pascals...

Hmph. Is H115i Asetek style?
post #5016 of 11183
Quote:
Originally Posted by toncij View Post

Running Corsair bracket and H115i on TitanX Maxwell with no problems. I think the bracket needs only some slight modification to fit Pascals...

Did you drilled the bracket? Because the wholes are a lot wider than the 53mm on nvidia cards
Quote:
Originally Posted by nexxusty View Post

Hmph. Is H115i Asetek style?

Nope, won't work with G10. G10 works with H75, H90, H105 and H100 if I'm not mistaken. Those round pumps with "teeth" around it.
post #5017 of 11183
1080 G1 Gaming with Kraken G10 + Thermaltake water 3.0 Extreme S 240mm even on 2200mhz keeps the card below 40 C with 4x1200rpm fans
post #5018 of 11183
Quote:
Originally Posted by GanGstaOne View Post

1080 G1 Gaming with Kraken G10 + Thermaltake water 3.0 Extreme S 240mm even on 2200mhz keeps the card below 40 C with 4x1200rpm fans

Forgot about Tt AIO's. AFAIK they all are Asetek mount style.

Quote:
Originally Posted by juniordnz View Post

Did you drilled the bracket? Because the wholes are a lot wider than the 53mm on nvidia cards
Nope, won't work with G10. G10 works with H75, H90, H105 and H100 if I'm not mistaken. Those round pumps with "teeth" around it.

FWIW, I as well thought this was the case. Let's see what he says....

Going to go finish the mod now. Hoping the shim is going to work well. 25mm×25mm×1.2mm is what I have, 20mm is ideal, however I don't see any issues with an extra 5mm. It does fit fine and isn't much bigger than the die.

That shim was sent to me BTW by a VERY nice OCN.NET member. For free. He also sent an extra one.

Love this forum.
Edited by nexxusty - 8/11/16 at 4:03pm
post #5019 of 11183
Quote:
Originally Posted by juniordnz View Post

Guys, how can I flash over the master BIOS when I'm on the slave BIOS. Is it possible? I bricked the master one biggrin.gif

I have done that as well, when you boot with the slave, just flip the switch back to master when your in windows and then flash and you are good to go.
post #5020 of 11183
Quote:
Originally Posted by juniordnz View Post

Did you drilled the bracket? Because the wholes are a lot wider than the 53mm on nvidia cards
Nope, won't work with G10. G10 works with H75, H90, H105 and H100 if I'm not mistaken. Those round pumps with "teeth" around it.

Nope... matched perfectly:
https://www.amazon.de/gp/product/B01ALIU7AS
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA
Overclock.net › Forums › Graphics Cards › NVIDIA › [Official] NVIDIA GTX 1080 Owner's Club