Overclock.net › Forums › Intel › Intel CPUs › Broadwell-E thread
New Posts  All Forums:Forum Nav:

Broadwell-E thread - Page 23

post #221 of 7252
Quote:
Originally Posted by Scotty99 View Post

Oh it would but it wouldnt save enough time in a day to be worth spending all that money on a new board/chip/ram etc, unless that is all you do on your pc.

And what tv you get? I just ordered a vizio P55 from best buy, should be here on thursday snagged it on a deal for 1099.00 smile.gif

samsung 65" 9000 series curved. forget exact model number other than it ends in 9000.

but yeah that's reason why I haven't upgraded from 2600k yet because it's never seemed worth it.

it's just insane the life that the 2600k has had. back in the day ever cpu release was a big deal now it's like meh 5 years later, I really don't have too.
post #222 of 7252
Quote:
Originally Posted by shark0311 View Post

If you look at the rig in my signature I have a pretty close setup and I get 4.5 GHz @ 1.262 V pretty easily. I think that you just have a bad 5820k. The Sabertooth has been a great board. What bios are you running?

I was thinking I didn't get a great chip, but you think it could've been thermal throttling as well? I never checked for it but running Prime95 it would get to 190F/88C, under more typical loads and benchmarking it'd hover in the 160F/71C range.

I started with the 2101 (I believe) BIOS, then upgraded to the latest, which was 3101.

I talked to a G Skill tech over the phone, and he said that ram I'm running should be fine even though it's not "certified / approved", and if the board didn't correctly load the ram profiles, that I could manually enter them. Does that sound feasible? I haven't messed with ram settings before.
post #223 of 7252
Setting ram timings manually are very easy to do. If you know the xmp settings of the ram you purchased simply input those values into the memory timings configurator of your board and then set the memory speed. Once done then set the dram voltage to what your ram is set to run at. Most likely this is 1.35V that should be all you need to do. From there you can also work on lowering the timings a bit if interested.


Always destroying exergy
post #224 of 7252
I manually entered my ram profile because I was overclocking it. I pulled the timings from the XMP then entered them manually and adjusted them for stability.

Here are my settings:
Warning: Spoiler! (Click to show)
[2016/05/12 18:52:15]
Ai Overclock Tuner [Auto]
ASUS MultiCore Enhancement [Auto]
CPU Core Ratio [Sync All Cores]
1-Core Ratio Limit [45]
2-Core Ratio Limit [45]
3-Core Ratio Limit [45]
4-Core Ratio Limit [45]
5-Core Ratio Limit [45]
6-Core Ratio Limit [45]
Min. CPU Cache Ratio [Auto]
Max. CPU Cache Ratio [36]
Internal PLL Overvoltage [Auto]
BCLK Frequency : DRAM Frequency Ratio [Auto]
DRAM Frequency [DDR4-3200MHz]
TPU [Keep Current Settings]
EPU Power Saving Mode [Disabled]
Extreme Over-voltage [Disabled]
Fully Manual Mode [Disabled]
CPU Core Voltage [Adaptive Mode]
Offset Mode Sign [+]
CPU Core Voltage Offset [0.253]
Additional Turbo Mode CPU Core Voltage [Auto]
CPU Cache Voltage [Auto]
CPU System Agent Voltage Offset Mode Sign [+]
CPU System Agent Voltage Offset [Auto]
CPU SVID Support [Auto]
CPU Input Voltage [Auto]
DRAM SVID Support [Disabled]
DRAM Voltage(CHA, CHB) [1.350]
DRAM Voltage(CHC, CHD) [1.350]
PCH Core Voltage [Auto]
PCH I/O Voltage [Auto]
VCCIO CPU 1.05V Voltage [Auto]
VCCIO PCH 1.05V Voltage [Auto]
VTTDDR Voltage(CHA, CHB) [Auto]
VTTDDR Voltage(CHC, CHD) [Auto]
PLL Termination Voltage [Auto]
PLL Reference Offset Mode Sign [+]
PLL Reference Offset Value [Auto]
CPU Spread Spectrum [Auto]
SfrTrim Optin [Disabled]
CPU Input Eventual Voltage [Auto]
DRAM CAS# Latency [16]
DRAM RAS# to CAS# Delay [16]
DRAM RAS# PRE Time [16]
DRAM RAS# ACT Time [36]
DRAM Command Rate [Timing 2T]
DRAM RAS# to RAS# Delay [Auto]
DRAM RAS# to RAS# Delay L [Auto]
DRAM REF Cycle Time [Auto]
DRAM Refresh Interval [Auto]
DRAM WRITE Recovery Time [Auto]
DRAM READ to PRE Time [Auto]
DRAM FOUR ACT WIN Time [Auto]
DRAM WRITE to READ Delay [Auto]
DRAM WRITE to READ Delay L [Auto]
DRAM CKE Minimum Pulse Width [Auto]
DRAM Write Latency [Auto]
tRRDR [Auto]
tRRDD [Auto]
tWWDR [Auto]
tWWDD [Auto]
tRWDR [Auto]
tWRDR [Auto]
tWRDD [Auto]
tRWSR [Auto]
tCCD [Auto]
tUWRDR [Auto]
tRWDR2 [Auto]
tRWDD [Auto]
tRWSR2 [Auto]
tWRDD2 [Auto]
tCCDWR [Auto]
tCCD_L [Auto]
DRAM Eventual Voltage(CHA, CHB) [Auto]
DRAM Eventual Voltage(CHC, CHD) [Auto]
DRAM CLK Period [Auto]
Memory Optimize Control [Auto]
Enhanced Training(CHA) [Auto]
Enhanced Training(CHB) [Auto]
Enhanced Training(CHC) [Auto]
Enhanced Training(CHD) [Auto]
MemTest [Auto]
Attempt Fast Boot [Auto]
Attempt Fast Cold Boot [Auto]
DRAM Training [Auto]
DRAM SPD Write [Disabled]
DRAM RTL INIT value [Auto]
DRAM RTL (CHA D0 R0) [Auto]
DRAM RTL (CHA D0 R1) [Auto]
DRAM RTL (CHA D1 R0) [Auto]
DRAM RTL (CHA D1 R1) [Auto]
DRAM RTL (CHB D0 R0) [Auto]
DRAM RTL (CHB D0 R1) [Auto]
DRAM RTL (CHB D1 R0) [Auto]
DRAM RTL (CHB D1 R1) [Auto]
DRAM RTL (CHC D0 R0) [Auto]
DRAM RTL (CHC D0 R1) [Auto]
DRAM RTL (CHC D1 R0) [Auto]
DRAM RTL (CHC D1 R1) [Auto]
DRAM RTL (CHD D0 R0) [Auto]
DRAM RTL (CHD D0 R1) [Auto]
DRAM RTL (CHD D1 R0) [Auto]
DRAM RTL (CHD D1 R1) [Auto]
DRAM IOL (CHA D0 R0) [Auto]
DRAM IOL (CHA D0 R1) [Auto]
DRAM IOL (CHA D1 R0) [Auto]
DRAM IOL (CHA D1 R1) [Auto]
DRAM IOL (CHB D0 R0) [Auto]
DRAM IOL (CHB D0 R1) [Auto]
DRAM IOL (CHB D1 R0) [Auto]
DRAM IOL (CHB D1 R1) [Auto]
DRAM IOL (CHC D0 R0) [Auto]
DRAM IOL (CHC D0 R1) [Auto]
DRAM IOL (CHC D1 R0) [Auto]
DRAM IOL (CHC D1 R1) [Auto]
DRAM IOL (CHD D0 R0) [Auto]
DRAM IOL (CHD D0 R1) [Auto]
DRAM IOL (CHD D1 R0) [Auto]
DRAM IOL (CHD D1 R1) [Auto]
MC Vref(CHA) [Auto]
MC Vref(CHB) [Auto]
MC Vref(CHC) [Auto]
MC Vref(CHD) [Auto]
DRAM Vref(CHA) [Auto]
DRAM Vref(CHB) [Auto]
DRAM Vref(CHC) [Auto]
DRAM Vref(CHD) [Auto]
CTL Vref (CHAB) Sign [+]
CTL Vref (CHAB) [Auto]
CTL Vref (CHCD) Sign [+]
CTL Verf (CHCD) [Auto]
Receiver DQ Pre-emphasis [Auto]
Receiver DQ De-emphasis [Auto]
Transmitter DQ De-emphasis [Auto]
Receiver DQS Pre-emphasis [Auto]
Receiver DQS De-emphasis [Auto]
Transmitter DQS De-emphasis [Auto]
Receiver CMD Pre-emphasis [Auto]
Receiver CMD De-emphasis [Auto]
Transmitter CMD De-emphasis [Auto]
Receiver CLK Pre-emphasis [Auto]
Receiver CLK De-emphasis [Auto]
Transmitter CLK De-emphasis [Auto]
Receiver CTL Pre-emphasis [Auto]
Receiver CTL De-emphasis [Auto]
Transmitter CTL De-emphasis [Auto]
Receiver ODT Pre-emphasis [Auto]
Receiver ODT De-emphasis [Auto]
Transmitter ODT De-emphasis [Auto]
CPU Input Boot Voltage [Auto]
CPU Load-line Calibration [Level 7]
CPU VRM Switching Frequency [Auto]
VRM Spread Spectrum [Enabled]
CPU Power Phase Control [Auto]
CPU Power Duty Control [T.Probe Thermal]
CPU Current Capability [Auto]
CPU Power Thermal Control [120]
DRAM Current Capability(CHA, CHB) [100%]
DRAM Current Capability(CHC, CHD) [100%]
DRAM Switching Frequency(CHA, CHB) [Auto]
DRAM Switching Frequency(CHC, CHD) [Auto]
DRAM Power Phase Control(CHA, CHB) [Standard]
DRAM Power Phase Control(CHC, CHD) [Standard]
Enhanced Intel SpeedStep Technology [Enabled]
Turbo Mode [Enabled]
Long Duration Package Power Limit [Auto]
Package Power Time Window [Auto]
Short Duration Package Power Limit [Auto]
CPU Integrated VR Current Limit [Auto]
CPU Integrated VR Fault Management [Auto]
CPU Integrated VR Efficiency Management [Auto]
Disable Parity Workaround [Disabled]
CMD Margins [40]
Serial Debug Message Level [Disabled]
Multi-Threaded MRC [Auto]
MemTestLoops [1]
EarlyCtlClk [Auto]
EarlyCmdClk [Auto]
Ddr4LrdimmBacksideRxPhase [Auto]
Ddr4LrdimmBacksideRxCycle [Auto]
Ddr4LrdimmBacksideRxDelay [Auto]
ReceiveEnable [Auto]
ReadDqDqs [Auto]
Ddr4LrdimmBacksideTxFineWL [Auto]
Ddr4LrdimmBacksideTxCoarseWL [Auto]
Ddr4LrdimmBacksideTxDelay [Auto]
WriteLeveling [Auto]
WriteLevelingCleanUp [Auto]
WrDqDqs [Auto]
WrEarlyVrefCentering [Auto]
RdEarlyVrefCentering [Auto]
LateCmdClk [Auto]
TxEqTraining [Auto]
ImodeTraining [Auto]
RxPerBitDeskew [Auto]
TxPerBitDeskew [Auto]
WrVrefCentering [Auto]
RdVrefCentering [Auto]
WrAdvancedCentering [Auto]
RdAdvancedCentering [Auto]
RoundTripOptimize [Auto]
SwitchToNormalMode [Auto]
RankMarginTool [Auto]
tRWDS [Auto]
tWWDS [Auto]
tRRDS [Auto]
tWRDS [Auto]
TXP DLL [Auto]
TXS OFFSET [Auto]
TXP [Auto]
DRAM_TSTAGGER_REF [Auto]
DRAM Refresh Interval (nREFIx9) [Auto]
t_cs_oe [Auto]
t_odt_oe [Auto]
shift_odt_early [Auto]
orefni [Auto]
Idle Page Rst Val [Auto]
Window Size [Auto]
PPC TH [Auto]
OPC TH [Auto]
Adapt pg clse [Auto]
pre_enable [Auto]
act_enable [Auto]
dis_opp_rd [Auto]
max_rpq_cas [Auto]
STR_OCMR_DRAM_TCKSRX [Auto]
Data Scrambling [Auto]
ddrCRCompCtl1 DQ Scomp delay cells (CHAB) [Auto]
ddrCRCompCtl1 DQ Scomp PC (CHAB) [Auto]
ddrCRCompCtl1 CMD Scomp delay cells (CHAB) [Auto]
ddrCRCompCtl1 CMD Scomp PC (CHAB) [Auto]
ddrCRCompCtl1 CTL Scomp delay cells (CHAB) [Auto]
ddrCRCompCtl1 CTL Scomp PC (CHAB) [Auto]
ddrCRCompCtl1 DQ Scomp delay cells (after) (CHAB) [Auto]
ddrCRCompCtl1 DQ Scomp PC (after) (CHAB) [Auto]
ddrCRCompCtl1 CMD Scomp delay cells (after) (CHAB) [Auto]
ddrCRCompCtl1 CMD Scomp PC (after) (CHAB) [Auto]
ddrCRCompCtl1 CTL Scomp delay cells (after) (CHAB) [Auto]
ddrCRCompCtl1 CTL Scomp PC (after) (CHAB) [Auto]
ddrCRCompCtl1 DQ Scomp delay cells (CHCD) [Auto]
ddrCRCompCtl1 DQ Scomp PC (CHCD) [Auto]
ddrCRCompCtl1 CMD Scomp delay cells (CHCD) [Auto]
ddrCRCompCtl1 CMD Scomp PC (CHCD) [Auto]
ddrCRCompCtl1 CTL Scomp delay cells (CHCD) [Auto]
ddrCRCompCtl1 CTL Scomp PC (CHCD) [Auto]
ddrCRCompCtl1 DQ Scomp delay cells (after) (CHCD) [Auto]
ddrCRCompCtl1 DQ Scomp PC (after) (CHCD) [Auto]
ddrCRCompCtl1 CMD Scomp delay cells (after) (CHCD) [Auto]
ddrCRCompCtl1 CMD Scomp PC (after) (CHCD) [Auto]
ddrCRCompCtl1 CTL Scomp delay cells (after) (CHCD) [Auto]
ddrCRCompCtl1 CTL Scomp PC (after) (CHCD) [Auto]
ddrCRClkComp Scomp ChA [Auto]
ddrCRClkComp Scomp ChB [Auto]
ddrCRClkComp Scomp ChC [Auto]
ddrCRClkComp Scomp ChD [Auto]
ddrCRCmdComp Scomp ChA [Auto]
ddrCRCmdComp Scomp ChB [Auto]
ddrCRCmdComp Scomp ChC [Auto]
ddrCRCmdComp Scomp ChD [Auto]
ddrCRCtlComp Scomp ChA [Auto]
ddrCRCtlComp Scomp ChB [Auto]
ddrCRCtlComp Scomp ChC [Auto]
ddrCRCtlComp Scomp ChD [Auto]
DDR DEBUG MR0 [0]
DDR DEBUG MR1 [0]
DDR DEBUG MR2 [0]
MRC Delay Time [Auto]
ODT RTTWR(CHA D0 R0) [Auto]
ODT RTTWR(CHA D0 R1) [Auto]
ODT RTTWR(CHA D1 R0) [Auto]
ODT RTTWR(CHA D1 R1) [Auto]
ODT RTTWR(CHB D0 R0) [Auto]
ODT RTTWR(CHB D0 R1) [Auto]
ODT RTTWR(CHB D1 R0) [Auto]
ODT RTTWR(CHB D1 R1) [Auto]
ODT RTTWR(CHC D0 R0) [Auto]
ODT RTTWR(CHC D0 R1) [Auto]
ODT RTTWR(CHC D1 R0) [Auto]
ODT RTTWR(CHC D1 R1) [Auto]
ODT RTTWR(CHD D0 R0) [Auto]
ODT RTTWR(CHD D0 R1) [Auto]
ODT RTTWR(CHD D1 R0) [Auto]
ODT RTTWR(CHD D1 R1) [Auto]
ODT RTTNOM(CHA D0 R0) [Auto]
ODT RTTNOM(CHA D0 R1) [Auto]
ODT RTTNOM(CHA D1 R0) [Auto]
ODT RTTNOM(CHA D1 R1) [Auto]
ODT RTTNOM(CHB D0 R0) [Auto]
ODT RTTNOM(CHB D0 R1) [Auto]
ODT RTTNOM(CHB D1 R0) [Auto]
ODT RTTNOM(CHB D1 R1) [Auto]
ODT RTTNOM(CHC D0 R0) [Auto]
ODT RTTNOM(CHC D0 R1) [Auto]
ODT RTTNOM(CHC D1 R0) [Auto]
ODT RTTNOM(CHC D1 R1) [Auto]
ODT RTTNOM(CHD D0 R0) [Auto]
ODT RTTNOM(CHD D0 R1) [Auto]
ODT RTTNOM(CHD D1 R0) [Auto]
ODT RTTNOM(CHD D1 R1) [Auto]
ODT RTTPARK(CHA D0 R0) [Auto]
ODT RTTPARK(CHA D0 R1) [Auto]
ODT RTTPARK(CHA D1 R0) [Auto]
ODT RTTPARK(CHA D1 R1) [Auto]
ODT RTTPARK(CHB D0 R0) [Auto]
ODT RTTPARK(CHB D0 R1) [Auto]
ODT RTTPARK(CHB D1 R0) [Auto]
ODT RTTPARK(CHB D1 R1) [Auto]
ODT RTTPARK(CHC D0 R0) [Auto]
ODT RTTPARK(CHC D0 R1) [Auto]
ODT RTTPARK(CHC D1 R0) [Auto]
ODT RTTPARK(CHC D1 R1) [Auto]
ODT RTTPARK(CHD D0 R0) [Auto]
ODT RTTPARK(CHD D0 R1) [Auto]
ODT RTTPARK(CHD D1 R0) [Auto]
ODT RTTPARK(CHD D1 R1) [Auto]
dqdrvpupvref Vref [Auto]
dqdrvpdnvref Vref [Auto]
dqodtpupvref Vref [Auto]
tcovref Vref [Auto]
dqodtpdnvref Vref [Auto]
clkdrvpupvref Vref [Auto]
clkdrvpdnvref Vref [Auto]
cmddrvpupvref Vref [Auto]
cmddrvpdnvref Vref [Auto]
ctldrvpupvref Vref [Auto]
ctldrvpdnvref Vref [Auto]
Hyper-Threading [ALL] [Enabled]
Intel Adaptive Thermal Monitor [Enabled]
Limit CPUID Maximum [Disabled]
Execute Disable Bit [Enabled]
Intel Virtualization Technology [Disabled]
Hardware Prefetcher [Enabled]
Adjacent Cache Line Prefetcher [Enabled]
Boot Performance Mode [Max Performance]
Maximum CPU Core Temperature [Auto]
Active Processor Core 0 [Enabled]
Active Processor Core 1 [Enabled]
Active Processor Core 2 [Enabled]
Active Processor Core 3 [Enabled]
Active Processor Core 4 [Enabled]
Active Processor Core 5 [Enabled]
Enhanced Intel SpeedStep Technology [Enabled]
Turbo Mode [Enabled]
CPU C-States [Auto]
PCIEX4_1 Speed [Auto]
PCIEX1_1 Speed [Auto]
Intel Rapid Start Technology [Enabled]
Hyper kit Mode [Disabled]
SATAEXPRESS SRIS Support [Auto]
S.M.A.R.T. Status Check [Enabled]
SATA Controller 1 Mode Selection [AHCI]
Support Aggressive Link Power Management [Disabled]
SATA6G_1(Beige) [Enabled]
Hot Plug [Disabled]
SATA6G_2(Beige) [Enabled]
Hot Plug [Disabled]
SATA6G_3(Gray) [Enabled]
Hot Plug [Disabled]
SATA6G_4(Gray) [Enabled]
Hot Plug [Disabled]
SATA6G_5(Gray) [Enabled]
Hot Plug [Disabled]
SATA6G_6(Gray) [Enabled]
Hot Plug [Disabled]
SATA Controller 2 Mode Selection [AHCI]
Support Aggressive Link Power Management [Disabled]
SATA6G_7(Black) [Enabled]
Hot Plug [Disabled]
SATA6G_8(Black) [Enabled]
Hot Plug [Disabled]
SATA6G_9(Black) [Enabled]
Hot Plug [Disabled]
SATA6G_10(Black) [Enabled]
Hot Plug [Disabled]
SATA Led locate [Enabled]
SATA HDD Unlock [Enabled]
SATA Led locate [Enabled]
MCTP [Disabled]
ACS Control [Disabled]
PCIEX16_1 Link Speed [Auto]
PCIEX16_2 Link Speed [Auto]
PCIEX16_3 Link Speed [Auto]
Intel VT for Directed I/O (VT-d) [Disabled]
DMI Gen 2 [Enabled]
Intel xHCI Mode [Smart Auto]
EHCI Legacy Support [Enabled]
xHCI Hand-off [Enabled]
EHCI Hand-off [Disabled]
Corsair Voyager Mini 0.00 [Auto]
USB3_1 [Enabled]
USB3_2 [Enabled]
USB3_3 [Enabled]
USB3_4 [Enabled]
USB3_5 [Enabled]
USB_7 [Enabled]
USB_8 [Enabled]
USB_9 [Enabled]
USB_10 [Enabled]
USB_11 [Enabled]
USB_12 [Enabled]
USB_13 [Enabled]
USB_14 [Enabled]
USB3_E2 [Enabled]
USB3_E3 [Enabled]
USB3_E4 [Enabled]
USB3_E5 (USB3.1) [Enabled]
USB3_E6 (USB3.1) [Enabled]
ErP Ready [Disabled]
Restore AC Power Loss [Power Off]
Power On By PCI-E/PCI [Disabled]
Power On By Ring [Disabled]
Power On By RTC [Disabled]
HD Audio Controller [Enabled]
Front Panel Type [HD Audio]
SPDIF Out Type [SPDIF]
PCIEX4_1 Slot(black) Bandwidth [Auto]
PCIEX16_3 Slot(black) Bandwidth [Auto]
Asmedia USB 3.1 Controller [Enabled]
Asmedia USB 3.1 Battery Charging Support [Disabled]
Intel LAN Controller [Enabled]
Intel Lan PXE Option ROM [Disabled]
Realtek LAN Controller [Enabled]
Realtek PXE Option ROM [Disabled]
Serial Port [Enabled]
Change Settings [IO=3F8h; IRQ=4]
SA DMI ASPM [Disabled]
PEG ASPM Support [Disabled]
PCH DMI ASPM [Disabled]
ASPM Support [Disabled]
Network Stack [Disabled]
Relaxed Ordering [Disabled]
Extended Tag [Disabled]
No Snoop [Enabled]
Maximum Payload [Auto]
Extended Synch [Disabled]
Link Training Retry [5]
Link Training Timeout (uS) [1000]
Restore PCIE Registers [Disabled]
Completion Timeout [Default]
ARI Forwarding [Disabled]
AtomicOp Requester Enable [Disabled]
AtomicOp Egress Blocking [Disabled]
IDO Request Enable [Disabled]
IDO Completion Enable [Disabled]
LTR Mechanism Enable [Disabled]
End-End TLP Prefix Blocking [Disabled]
Clock Power Management [Disabled]
Compliance SOS [Disabled]
Hardware Autonomous Width [Enabled]
Hardware Autonomous Speed [Enabled]
BIOS Hot-Plug Support [Enabled]
PCI Buses Padding [1]
I/O Resources Padding [4 K]
MMIO 32 bit Resources Padding [16 M]
PFMMIO 32 bit Resources Padding [16 M]
Intel Thunderbolt Technology [Disabled]
CPU Temperature [Monitor]
CPU Core Voltage [Monitor]
3.3V Voltage [Monitor]
5V Voltage [Monitor]
12V Voltage [Monitor]
CPU Fan Speed [Monitor]
CPU Optional Fan Speed [Monitor]
Chassis Fan 1 Speed [Monitor]
Chassis Fan 2 Speed [Monitor]
Chassis Fan 3 Speed [Monitor]
Chassis Fan 4 Speed [Monitor]
Asst Fan 1 Speed [Monitor]
Asst Fan 2 Speed [Monitor]
Asst Fan 3 Speed [Monitor]
Asst Fan 4 Speed [Monitor]
Asst Fan 5 Speed [Monitor]
CPU Q-Fan Control [Auto]
CPU Fan Speed Lower Limit [300 RPM]
CPU Fan Profile [Standard]
Chassis Fan 1 Q-Fan Control [DC Mode]
Chassis Fan 1 Q-Fan Source [CPU]
Chassis Fan 1 Speed Low Limit [300 RPM]
Chassis Fan 1 Profile [Standard]
Chassis Fan 2 Q-Fan Control [DC Mode]
Chassis Fan 2 Q-Fan Source [CPU]
Chassis Fan 2 Speed Low Limit [300 RPM]
Chassis Fan 2 Profile [Standard]
Chassis Fan 3 Q-Fan Control [DC Mode]
Chassis Fan 3 Q-Fan Source [CPU]
Chassis Fan 3 Speed Low Limit [300 RPM]
Chassis Fan 3 Profile [Standard]
Chassis Fan 4 Q-Fan Control [DC Mode]
Chassis Fan 4 Q-Fan Source [CPU]
Chassis Fan 4 Speed Low Limit [300 RPM]
Chassis Fan 4 Profile [Standard]
ASST Fan 1 Q-Fan Control [DC Mode]
Asst Fan 1 Q-Fan Source [CPU]
Asst Fan 1 Speed Low Limit [300 RPM]
Asst Fan 1 Profile [Standard]
ASST Fan 2 Q-Fan Control [DC Mode]
Asst Fan 2 Q-Fan Source [CPU]
Asst Fan 2 Speed Low Limit [300 RPM]
Asst Fan 2 Profile [Standard]
ASST Fan 3 Q-Fan Control [DC Mode]
Asst Fan 3 Q-Fan Source [CPU]
Asst Fan 3 Speed Low Limit [300 RPM]
Asst Fan 3 Profile [Standard]
ASST Fan 4 Q-Fan Control [DC Mode]
Asst Fan 4 Q-Fan Source [CPU]
Asst Fan 4 Speed Low Limit [300 RPM]
Asst Fan 4 Profile [Standard]
ASST Fan 5 Q-Fan Control [DC Mode]
Asst Fan 5 Q-Fan Source [CPU]
Asst Fan 5 Speed Low Limit [300 RPM]
Asst Fan 5 Profile [Standard]
Fan Overtime [1 minutes]
Dust de-Fan [30 Seconds]
Reversed periodically in OS [2 Hour]
Reversed duration in OS [30 Seconds]
Anti Surge Support [Enabled]
Chassis Intrude Detect Support [Enabled]
MotherBoard Temperature [Monitor]
PCH Temperature [Monitor]
VCORE Temperature [Monitor]
VCORE(BACK) Temperature [Monitor]
DRAM1 Temperature [Monitor]
DRAM2 Temperature [Monitor]
USB3.0 Temperature [Monitor]
PCIE-1 Temperature [Monitor]
PCIE-2 Temperature [Monitor]
T_Sensor1 Temperature [Monitor]
T_Sensor2 Temperature [Monitor]
T_Sensor3 Temperature [Monitor]
Fast Boot [Enabled]
SATA Support [All Devices]
USB Support [Partial Initialization]
Network Stack Driver Support [Disabled]
Redirection Support [Disabled]
Next Boot after AC Power Loss [Normal Boot]
Boot Logo Display [Auto]
POST Delay Time [3 sec]
DirectKey (DRCT) [Enabled]
Boot up NumLock State [Enabled]
Wait For 'F1' If Error [Enabled]
Option ROM Messages [Force BIOS]
INT19 Trap Response [Immediate]
Above 4G Decoding [Disabled]
Setup Mode [EZ Mode]
Launch CSM [Enabled]
Boot Device Control [UEFI and Legacy OPROM]
Boot from Network Devices [Legacy only]
Boot from Storage Devices [Legacy only]
Boot from PCI-E/PCI Expansion Devices [Legacy only]
OS Type [Windows UEFI mode]
Setup Animator [Disabled]
Load from Profile [1]
Profile Name [OC]
Save to Profile [1]

Edited by shark0311 - 6/6/16 at 11:39am
     
CPUMotherboardGraphicsRAM
I7 5820k @ 4.5 GHz Asus Sabertooth X99 Asus Strix 1080 8G Gaming G.Skill Ripjaws 2800 @ 3200 16-16-16-36 
CoolingOSMonitorPower
Swiftech H240-X Windows 10 LG 34um57 @ 75Hz Corsair HX850 
CaseMouseOther
Corsair C70 Black Aorus X7 HTC Vive 
CPUGraphicsRAMOS
Intel Processor i7 7700HQ NVIDIA GeForce GTX 1060 16GB Windows 10 pro 
MonitorOther
4k UHD Razer Blade 2014 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
I7 5820k @ 4.5 GHz Asus Sabertooth X99 Asus Strix 1080 8G Gaming G.Skill Ripjaws 2800 @ 3200 16-16-16-36 
CoolingOSMonitorPower
Swiftech H240-X Windows 10 LG 34um57 @ 75Hz Corsair HX850 
CaseMouseOther
Corsair C70 Black Aorus X7 HTC Vive 
CPUGraphicsRAMOS
Intel Processor i7 7700HQ NVIDIA GeForce GTX 1060 16GB Windows 10 pro 
MonitorOther
4k UHD Razer Blade 2014 
  hide details  
Reply
post #225 of 7252
For a post of that length of you don't mind please use the spoiler button to condense it for others and overall thread cleanliness.


Always destroying exergy
post #226 of 7252
Sorry about that.
     
CPUMotherboardGraphicsRAM
I7 5820k @ 4.5 GHz Asus Sabertooth X99 Asus Strix 1080 8G Gaming G.Skill Ripjaws 2800 @ 3200 16-16-16-36 
CoolingOSMonitorPower
Swiftech H240-X Windows 10 LG 34um57 @ 75Hz Corsair HX850 
CaseMouseOther
Corsair C70 Black Aorus X7 HTC Vive 
CPUGraphicsRAMOS
Intel Processor i7 7700HQ NVIDIA GeForce GTX 1060 16GB Windows 10 pro 
MonitorOther
4k UHD Razer Blade 2014 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
I7 5820k @ 4.5 GHz Asus Sabertooth X99 Asus Strix 1080 8G Gaming G.Skill Ripjaws 2800 @ 3200 16-16-16-36 
CoolingOSMonitorPower
Swiftech H240-X Windows 10 LG 34um57 @ 75Hz Corsair HX850 
CaseMouseOther
Corsair C70 Black Aorus X7 HTC Vive 
CPUGraphicsRAMOS
Intel Processor i7 7700HQ NVIDIA GeForce GTX 1060 16GB Windows 10 pro 
MonitorOther
4k UHD Razer Blade 2014 
  hide details  
Reply
post #227 of 7252
Quote:
Originally Posted by shark0311 View Post

Sorry about that.
No problem wink.gif now you know


Always destroying exergy
post #228 of 7252
Quote:
Originally Posted by sexpot View Post

Can you do the stress test at 1 hour, 32gb ram? 1 run of the benchmark is not enough to indicate stability or not. smile.gif
Can you run linpack with all ram for 4h? biggrin.gif

tongue.gif
post #229 of 7252
Is anyone able to disable hyperthreading while overclocking the 6950X? Meaning, do all cores run at the speed you set when disabling HT?

Also, can anyone confirm C-state and EIST disabling works for them?


If the answer is yes to these questions, please share your MOBO+BIOS version
post #230 of 7252
I got my 6900K, the known store in Germany decided it is a good idea to send it in a bubble-wrap envelope so needless to say it's not in a good shape anymore. Haven't opened the package yet, I'm furious. mad.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Broadwell-E thread