post #1 of 1
Thread Starter 
This Classified is Closed

For Sale:
F/S 2x EK Titan X/980-Ti acetal.copper fullcover blocks

Will Ship To: US48

-2x used EK Titan X or GTX 980 Ti acetal and copper full cover blocks.

-original pad is still in attached to the block
-all mounting screws accounted for
-two ek plugs each
-both hex wrenches included

Please note: these were purchased from another forum and when I got them, I discovered they were missing the terminal o-rings and terminal screws. I have replaced the o-rings with used ones I have on hand and I used some spare M4x25mm hex screws i had. Ek (and ppcs) sells the o-rings for cheap if you want new ones. The oem screws are M4x28mm btw. I did a simple air leak test and both passed. I would not recommend to use 30mm long screws as they may crack your top. The 25mm replacement screws held tight with no issues.

***I don't have spare pad, backplates, or tim. So please do not contact me about these. Check stores like ekwb-shop or for these items. Thank you!***

Going to Ebay

Edited by wermad - 6/8/16 at 4:41pm