Overclock.net › Forums › Volt Mods › General Volt Mods › Graphics Cards Volt Mods › OverVolting A Kepler Based Card!
New Posts  All Forums:Forum Nav:

OverVolting A Kepler Based Card!

post #1 of 2
Thread Starter 
I really want to overvolt my GTX 650 2 GB card.

I've seen people overvolt their GTX 650ti to 1.2v on Kepler as they say it's the limit for Kepler.
I didn't wanna flash it before and then ending up with a bricked card. I wanted to know whether or not what i did is okay from somebody who knows a thing or two about a unlocked BIOS .

At the moment I max out at 1.137v I want to reach as far as I can as I have a stable power supply and a lot of temp. headroom.

And If anyone can help me out by modifying my stock BIOS to get any form I've already uploaded my GPU BIOS.

BIOS -

https://drive.google.com/file/d/0Bw5Nkq9H49JbbGFLSlc5WUNTeVE/view?usp=sharing

Any Help Is IMMENSELY Appreciated.

Images -

http://s19.postimg.org/ka5cog5fn/oc1.jpg
http://s19.postimg.org/6dx4ck96r/oc2.jpg
http://s19.postimg.org/liomwc803/oc3.jpg
http://s19.postimg.org/87010vudf/oc4.jpg
http://s19.postimg.org/eus19qohv/oc5.jpg
http://s19.postimg.org/sn6g5df9f/oc6.jpg
post #2 of 2
Here's all the info you need:
http://www.overclock.net/t/1289489/gtx-600-series-unlocked-voltage-bios-downloads-and-tools
Also bios modding is mostly safe. The only way of brick in your card is if you skip half of the information or if you shutdown your computer while flashing. Most of the time you can still revive the card using a second one.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Graphics Cards Volt Mods
Overclock.net › Forums › Volt Mods › General Volt Mods › Graphics Cards Volt Mods › OverVolting A Kepler Based Card!