Overclock.net › Forums › Cooling › Water Cooling › Can't remove my water block
New Posts  All Forums:Forum Nav:

Can't remove my water block - Page 2

post #11 of 23
OOOOOhhhhh ok. Yeah I had that sort of thing happen before on something else

You're gonna need some real good quality needle nose pliars that don't suck

http://www.amazon.com/Xcelite-L4V-Sub-Miniature-Cushion-Serrated/dp/B004UN8R1W/ref=pd_sim_328_4?ie=UTF8&dpID=31OGBpu40AL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=09YPBN1Q8MFJMTVEHV50

see the grip on the end. Good quality stuff makes all the difference.


Another thing you could try is soldering something to that piece to hold it. It's highly likely that it's plated with something that can't be soldered to though
Home Gaming Rig
(17 items)
 
Server Computer
(11 items)
 
 
CPUMotherboardGraphicsRAM
i7-3820s @ 4.75 GHz intel DX79SR Sapphire R9 fury x  4x4 GEIL running at 2333 10-12-11-28 T1 
Hard DriveHard DriveOptical DriveCooling
samsung 850 EVO times 4 in raid 0 samsung 960 Pro samsung dvdR danger den 1366 waterblock 
OSMonitorKeyboardPower
Windows 7 Ultimate hp la2405wg old dell ps/2 Corsair HX1050 
CaseMouseMouse PadAudio
apevia xcruiser 2 microsoft intellimouse explorer 1.2A formica countertop alesis monitor one MK2 speakers 
Other
adaptec 6405 raid controller 512MB cache 
CPUMotherboardGraphicsGraphics
qx6800 @ 3.1GHz intel dx48bt2 sapphire radeon HD 5870 sapphire radeon HD 5870 
GraphicsRAMHard DriveCooling
xfx 5970 corsair low latency ddr3-1600  wd velociraptor 500GB Danger Den 775 waterblock 
OS
Windows 7 Ultimate 
  hide details  
Reply
Home Gaming Rig
(17 items)
 
Server Computer
(11 items)
 
 
CPUMotherboardGraphicsRAM
i7-3820s @ 4.75 GHz intel DX79SR Sapphire R9 fury x  4x4 GEIL running at 2333 10-12-11-28 T1 
Hard DriveHard DriveOptical DriveCooling
samsung 850 EVO times 4 in raid 0 samsung 960 Pro samsung dvdR danger den 1366 waterblock 
OSMonitorKeyboardPower
Windows 7 Ultimate hp la2405wg old dell ps/2 Corsair HX1050 
CaseMouseMouse PadAudio
apevia xcruiser 2 microsoft intellimouse explorer 1.2A formica countertop alesis monitor one MK2 speakers 
Other
adaptec 6405 raid controller 512MB cache 
CPUMotherboardGraphicsGraphics
qx6800 @ 3.1GHz intel dx48bt2 sapphire radeon HD 5870 sapphire radeon HD 5870 
GraphicsRAMHard DriveCooling
xfx 5970 corsair low latency ddr3-1600  wd velociraptor 500GB Danger Den 775 waterblock 
OS
Windows 7 Ultimate 
  hide details  
Reply
post #12 of 23
Thread Starter 
I'm trying to drill it out. It's hard because the screws just spinning.
Neophyte
(29 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5930k Asus X99 Rampage Edition 10 2x Zotac GTX 980Ti G.SKILL Ripjaws 4 
Hard DriveHard DriveCoolingCooling
Samsung 840 EVO 1TB 2x Seagate Barracuda 3TB (RAID1) EK Revo Dual D5 AlphaCool NexXxoS XT 45 480 
CoolingCoolingCoolingCooling
Bitspower Matte Black V3 Fittings PrimoFlex Advanced LRT Tubing Clear Mayhems Pastel Blueberry EK-XRES 250 w/ Multiport Top 
CoolingCoolingCoolingCooling
EK-Supremacy EVO Nickel Plexi 2x EK-FC TitanX/980Ti (Original CSQ) Nickel Plexi 2x EK-FC TitanX/980Ti Backplate (Black) EK HDC Nickel Fittings 
CoolingCoolingOSMonitor
EK PETG Tubing AlphaCool NexXxoS Monsta 560 Windows 10 Pro BenQ XL2420TE 24" 144 Hz 1080p 
MonitorKeyboardPowerCase
2x BenQ GL2460HM 24" 60Hz 1080p Ducky DK2108SZ Black Seasonic X-1050 80+ Platinum Case Labs SMA8 
MouseAudioAudioAudio
Razer DeathAdder FX Audio DAC-X6 AKG K7XX (Mass Drop Limited Edition) MXL V67GS Condenser Mic 
Audio
MXL MicMate Pro 
  hide details  
Reply
Neophyte
(29 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5930k Asus X99 Rampage Edition 10 2x Zotac GTX 980Ti G.SKILL Ripjaws 4 
Hard DriveHard DriveCoolingCooling
Samsung 840 EVO 1TB 2x Seagate Barracuda 3TB (RAID1) EK Revo Dual D5 AlphaCool NexXxoS XT 45 480 
CoolingCoolingCoolingCooling
Bitspower Matte Black V3 Fittings PrimoFlex Advanced LRT Tubing Clear Mayhems Pastel Blueberry EK-XRES 250 w/ Multiport Top 
CoolingCoolingCoolingCooling
EK-Supremacy EVO Nickel Plexi 2x EK-FC TitanX/980Ti (Original CSQ) Nickel Plexi 2x EK-FC TitanX/980Ti Backplate (Black) EK HDC Nickel Fittings 
CoolingCoolingOSMonitor
EK PETG Tubing AlphaCool NexXxoS Monsta 560 Windows 10 Pro BenQ XL2420TE 24" 144 Hz 1080p 
MonitorKeyboardPowerCase
2x BenQ GL2460HM 24" 60Hz 1080p Ducky DK2108SZ Black Seasonic X-1050 80+ Platinum Case Labs SMA8 
MouseAudioAudioAudio
Razer DeathAdder FX Audio DAC-X6 AKG K7XX (Mass Drop Limited Edition) MXL V67GS Condenser Mic 
Audio
MXL MicMate Pro 
  hide details  
Reply
post #13 of 23
Thread Starter 
Okay.. hmm... I guess the only way is to cut off the back plate with a dremel to free those 3 screws and replace both it and the block. mad.gif
Neophyte
(29 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5930k Asus X99 Rampage Edition 10 2x Zotac GTX 980Ti G.SKILL Ripjaws 4 
Hard DriveHard DriveCoolingCooling
Samsung 840 EVO 1TB 2x Seagate Barracuda 3TB (RAID1) EK Revo Dual D5 AlphaCool NexXxoS XT 45 480 
CoolingCoolingCoolingCooling
Bitspower Matte Black V3 Fittings PrimoFlex Advanced LRT Tubing Clear Mayhems Pastel Blueberry EK-XRES 250 w/ Multiport Top 
CoolingCoolingCoolingCooling
EK-Supremacy EVO Nickel Plexi 2x EK-FC TitanX/980Ti (Original CSQ) Nickel Plexi 2x EK-FC TitanX/980Ti Backplate (Black) EK HDC Nickel Fittings 
CoolingCoolingOSMonitor
EK PETG Tubing AlphaCool NexXxoS Monsta 560 Windows 10 Pro BenQ XL2420TE 24" 144 Hz 1080p 
MonitorKeyboardPowerCase
2x BenQ GL2460HM 24" 60Hz 1080p Ducky DK2108SZ Black Seasonic X-1050 80+ Platinum Case Labs SMA8 
MouseAudioAudioAudio
Razer DeathAdder FX Audio DAC-X6 AKG K7XX (Mass Drop Limited Edition) MXL V67GS Condenser Mic 
Audio
MXL MicMate Pro 
  hide details  
Reply
Neophyte
(29 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5930k Asus X99 Rampage Edition 10 2x Zotac GTX 980Ti G.SKILL Ripjaws 4 
Hard DriveHard DriveCoolingCooling
Samsung 840 EVO 1TB 2x Seagate Barracuda 3TB (RAID1) EK Revo Dual D5 AlphaCool NexXxoS XT 45 480 
CoolingCoolingCoolingCooling
Bitspower Matte Black V3 Fittings PrimoFlex Advanced LRT Tubing Clear Mayhems Pastel Blueberry EK-XRES 250 w/ Multiport Top 
CoolingCoolingCoolingCooling
EK-Supremacy EVO Nickel Plexi 2x EK-FC TitanX/980Ti (Original CSQ) Nickel Plexi 2x EK-FC TitanX/980Ti Backplate (Black) EK HDC Nickel Fittings 
CoolingCoolingOSMonitor
EK PETG Tubing AlphaCool NexXxoS Monsta 560 Windows 10 Pro BenQ XL2420TE 24" 144 Hz 1080p 
MonitorKeyboardPowerCase
2x BenQ GL2460HM 24" 60Hz 1080p Ducky DK2108SZ Black Seasonic X-1050 80+ Platinum Case Labs SMA8 
MouseAudioAudioAudio
Razer DeathAdder FX Audio DAC-X6 AKG K7XX (Mass Drop Limited Edition) MXL V67GS Condenser Mic 
Audio
MXL MicMate Pro 
  hide details  
Reply
post #14 of 23
Quote:
Originally Posted by james41382 View Post

See the metal support is not connected to the block anymore?


Wow, I was trying to picture this on your first post. Looks like it's really torquing the PCB pretty good. That piece looks pretty smooth, it'll probably be very difficult to get a grip on it, even if you have a good set of pliers. Do you know how that "support" was originally a part of the EK block? Was it screwed in itself, or just pressed in?

Either way, instead of drilling it out or cutting it I would try to get it stuck back in there first, then back out the screw. If you can't screw the support in you could try pressing it in with a very small C-Clamp (or similar) with some cloth or cardboard to help protect the card. You could try adding some Loctite to help it stick as well.

Alternatively (or in conjunction with the above) you could try getting a small amount of penetrating fluid on the threads. You'll probably need to be very careful cleaning the card down afterwards (though you would with the Loctite too) but it may help break it loose.

As a third option you could try contacting one of the EK reps here (we have those, right?) as they might have some suggestions too. I'm sure this isn't the first time something like this has happened.

I would only cut it off as the absolute last resort!

No matter what you do have some patience! If you rush it you might break something, and in this case you definitely want to be sure that something isn't the GPU itself. If you're getting frustrated with it just walk away from for awhile and come back with a fresh set of eyes. smile.gif
Sherlock
(12 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 5775C Asus Z97i Plus Sapphire RX480 Corsair Dominator Platinum 2400 
Hard DriveCoolingOSMonitor
1TB Samsung 960 EVO BeQuiet! Dark Rock 3 Windows 10 Pro Acer XR382CQK 
KeyboardPowerCaseMouse
Unicomp Ultra Classic Silverstone Strider 850w Platinum Lian Li V1000 Thermaltake Level 10 
  hide details  
Reply
Sherlock
(12 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 5775C Asus Z97i Plus Sapphire RX480 Corsair Dominator Platinum 2400 
Hard DriveCoolingOSMonitor
1TB Samsung 960 EVO BeQuiet! Dark Rock 3 Windows 10 Pro Acer XR382CQK 
KeyboardPowerCaseMouse
Unicomp Ultra Classic Silverstone Strider 850w Platinum Lian Li V1000 Thermaltake Level 10 
  hide details  
Reply
post #15 of 23
Thread Starter 
I believe the supports thread in to the back of the block and 3 of them are broken. I'm new to water cooling and this is my second 980Ti. Installed the first one easily, but this one has been a pain. It was going so smoothly until I got to the backplate then 2 supports snapped while tightening them and another broke while trying to remove it.

The supports along with the screws spin whether turned CW or CCW so there is no chance tightening the support to the block to try and back out the screw. Drilling doesn't work either because the whole thing just spins. I took a break because I'm really trying to avoid damaging the GPU.

I currently don't have any ideas other than trying to cut out the backplate with a dremel around the 3 screws. It would take some very steady hands to cut through the back plate and not hit the PCB.

Another idea would be to try and cut off the head of the screw, but it would also be very difficult since they are counter sunk.

Ideas anyone? Can someone get an EK hardware rep in on this discussion @AKIRA749?
Edited by james41382 - 6/7/16 at 6:43am
Neophyte
(29 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5930k Asus X99 Rampage Edition 10 2x Zotac GTX 980Ti G.SKILL Ripjaws 4 
Hard DriveHard DriveCoolingCooling
Samsung 840 EVO 1TB 2x Seagate Barracuda 3TB (RAID1) EK Revo Dual D5 AlphaCool NexXxoS XT 45 480 
CoolingCoolingCoolingCooling
Bitspower Matte Black V3 Fittings PrimoFlex Advanced LRT Tubing Clear Mayhems Pastel Blueberry EK-XRES 250 w/ Multiport Top 
CoolingCoolingCoolingCooling
EK-Supremacy EVO Nickel Plexi 2x EK-FC TitanX/980Ti (Original CSQ) Nickel Plexi 2x EK-FC TitanX/980Ti Backplate (Black) EK HDC Nickel Fittings 
CoolingCoolingOSMonitor
EK PETG Tubing AlphaCool NexXxoS Monsta 560 Windows 10 Pro BenQ XL2420TE 24" 144 Hz 1080p 
MonitorKeyboardPowerCase
2x BenQ GL2460HM 24" 60Hz 1080p Ducky DK2108SZ Black Seasonic X-1050 80+ Platinum Case Labs SMA8 
MouseAudioAudioAudio
Razer DeathAdder FX Audio DAC-X6 AKG K7XX (Mass Drop Limited Edition) MXL V67GS Condenser Mic 
Audio
MXL MicMate Pro 
  hide details  
Reply
Neophyte
(29 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5930k Asus X99 Rampage Edition 10 2x Zotac GTX 980Ti G.SKILL Ripjaws 4 
Hard DriveHard DriveCoolingCooling
Samsung 840 EVO 1TB 2x Seagate Barracuda 3TB (RAID1) EK Revo Dual D5 AlphaCool NexXxoS XT 45 480 
CoolingCoolingCoolingCooling
Bitspower Matte Black V3 Fittings PrimoFlex Advanced LRT Tubing Clear Mayhems Pastel Blueberry EK-XRES 250 w/ Multiport Top 
CoolingCoolingCoolingCooling
EK-Supremacy EVO Nickel Plexi 2x EK-FC TitanX/980Ti (Original CSQ) Nickel Plexi 2x EK-FC TitanX/980Ti Backplate (Black) EK HDC Nickel Fittings 
CoolingCoolingOSMonitor
EK PETG Tubing AlphaCool NexXxoS Monsta 560 Windows 10 Pro BenQ XL2420TE 24" 144 Hz 1080p 
MonitorKeyboardPowerCase
2x BenQ GL2460HM 24" 60Hz 1080p Ducky DK2108SZ Black Seasonic X-1050 80+ Platinum Case Labs SMA8 
MouseAudioAudioAudio
Razer DeathAdder FX Audio DAC-X6 AKG K7XX (Mass Drop Limited Edition) MXL V67GS Condenser Mic 
Audio
MXL MicMate Pro 
  hide details  
Reply
post #16 of 23
If you want to get it off with the least damage and don't think the good pliars will work, I'd get a good carbide drill bit a little smaller than the total head of the screw, then drill the center of the screw until you have drilled off the tapered head of it, then the backplate will come off, the threaded part of the screw will still be in the hole, and the card will be free without doing any dangerous work near the card.
Home Gaming Rig
(17 items)
 
Server Computer
(11 items)
 
 
CPUMotherboardGraphicsRAM
i7-3820s @ 4.75 GHz intel DX79SR Sapphire R9 fury x  4x4 GEIL running at 2333 10-12-11-28 T1 
Hard DriveHard DriveOptical DriveCooling
samsung 850 EVO times 4 in raid 0 samsung 960 Pro samsung dvdR danger den 1366 waterblock 
OSMonitorKeyboardPower
Windows 7 Ultimate hp la2405wg old dell ps/2 Corsair HX1050 
CaseMouseMouse PadAudio
apevia xcruiser 2 microsoft intellimouse explorer 1.2A formica countertop alesis monitor one MK2 speakers 
Other
adaptec 6405 raid controller 512MB cache 
CPUMotherboardGraphicsGraphics
qx6800 @ 3.1GHz intel dx48bt2 sapphire radeon HD 5870 sapphire radeon HD 5870 
GraphicsRAMHard DriveCooling
xfx 5970 corsair low latency ddr3-1600  wd velociraptor 500GB Danger Den 775 waterblock 
OS
Windows 7 Ultimate 
  hide details  
Reply
Home Gaming Rig
(17 items)
 
Server Computer
(11 items)
 
 
CPUMotherboardGraphicsRAM
i7-3820s @ 4.75 GHz intel DX79SR Sapphire R9 fury x  4x4 GEIL running at 2333 10-12-11-28 T1 
Hard DriveHard DriveOptical DriveCooling
samsung 850 EVO times 4 in raid 0 samsung 960 Pro samsung dvdR danger den 1366 waterblock 
OSMonitorKeyboardPower
Windows 7 Ultimate hp la2405wg old dell ps/2 Corsair HX1050 
CaseMouseMouse PadAudio
apevia xcruiser 2 microsoft intellimouse explorer 1.2A formica countertop alesis monitor one MK2 speakers 
Other
adaptec 6405 raid controller 512MB cache 
CPUMotherboardGraphicsGraphics
qx6800 @ 3.1GHz intel dx48bt2 sapphire radeon HD 5870 sapphire radeon HD 5870 
GraphicsRAMHard DriveCooling
xfx 5970 corsair low latency ddr3-1600  wd velociraptor 500GB Danger Den 775 waterblock 
OS
Windows 7 Ultimate 
  hide details  
Reply
post #17 of 23
Thread Starter 
Quote:
Originally Posted by Dieselbird View Post

If you want to get it off with the least damage and don't think the good pliars will work, I'd get a good carbide drill bit a little smaller than the total head of the screw, then drill the center of the screw until you have drilled off the tapered head of it, then the backplate will come off, the threaded part of the screw will still be in the hole, and the card will be free without doing any dangerous work near the card.

I tried the drill on it last night. It doesn't work because the whole thing just spins with the bit.
Neophyte
(29 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5930k Asus X99 Rampage Edition 10 2x Zotac GTX 980Ti G.SKILL Ripjaws 4 
Hard DriveHard DriveCoolingCooling
Samsung 840 EVO 1TB 2x Seagate Barracuda 3TB (RAID1) EK Revo Dual D5 AlphaCool NexXxoS XT 45 480 
CoolingCoolingCoolingCooling
Bitspower Matte Black V3 Fittings PrimoFlex Advanced LRT Tubing Clear Mayhems Pastel Blueberry EK-XRES 250 w/ Multiport Top 
CoolingCoolingCoolingCooling
EK-Supremacy EVO Nickel Plexi 2x EK-FC TitanX/980Ti (Original CSQ) Nickel Plexi 2x EK-FC TitanX/980Ti Backplate (Black) EK HDC Nickel Fittings 
CoolingCoolingOSMonitor
EK PETG Tubing AlphaCool NexXxoS Monsta 560 Windows 10 Pro BenQ XL2420TE 24" 144 Hz 1080p 
MonitorKeyboardPowerCase
2x BenQ GL2460HM 24" 60Hz 1080p Ducky DK2108SZ Black Seasonic X-1050 80+ Platinum Case Labs SMA8 
MouseAudioAudioAudio
Razer DeathAdder FX Audio DAC-X6 AKG K7XX (Mass Drop Limited Edition) MXL V67GS Condenser Mic 
Audio
MXL MicMate Pro 
  hide details  
Reply
Neophyte
(29 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5930k Asus X99 Rampage Edition 10 2x Zotac GTX 980Ti G.SKILL Ripjaws 4 
Hard DriveHard DriveCoolingCooling
Samsung 840 EVO 1TB 2x Seagate Barracuda 3TB (RAID1) EK Revo Dual D5 AlphaCool NexXxoS XT 45 480 
CoolingCoolingCoolingCooling
Bitspower Matte Black V3 Fittings PrimoFlex Advanced LRT Tubing Clear Mayhems Pastel Blueberry EK-XRES 250 w/ Multiport Top 
CoolingCoolingCoolingCooling
EK-Supremacy EVO Nickel Plexi 2x EK-FC TitanX/980Ti (Original CSQ) Nickel Plexi 2x EK-FC TitanX/980Ti Backplate (Black) EK HDC Nickel Fittings 
CoolingCoolingOSMonitor
EK PETG Tubing AlphaCool NexXxoS Monsta 560 Windows 10 Pro BenQ XL2420TE 24" 144 Hz 1080p 
MonitorKeyboardPowerCase
2x BenQ GL2460HM 24" 60Hz 1080p Ducky DK2108SZ Black Seasonic X-1050 80+ Platinum Case Labs SMA8 
MouseAudioAudioAudio
Razer DeathAdder FX Audio DAC-X6 AKG K7XX (Mass Drop Limited Edition) MXL V67GS Condenser Mic 
Audio
MXL MicMate Pro 
  hide details  
Reply
post #18 of 23
You could try a pair of needle nose vise grips and if the tip is too big to fit grind it down till you can grip the piece that is spinning.
Edited by zerocool135 - 6/7/16 at 3:52pm
    
CPUMotherboardGraphicsRAM
Intel Core i7 4770k Gigabyte GA-Z87X-UD4H GeForce GTX 680  Crucial Ballistix Elite 
Hard DriveHard DriveOptical DriveCooling
WD30EZRX x2 Intel 520 SSD LG Bluray Burner WH12LS39 x2 Fully Liquid Cooled 
OSMonitorKeyboardPower
Win 7 Pro Qnix QX2710 Razer Blackwidow Ultimate 2013 BF4 Edition Corsair AX760 
CaseMouseMouse Pad
Switch 810 Gunmetal G700s Steelseries 4HD 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i7 4770k Gigabyte GA-Z87X-UD4H GeForce GTX 680  Crucial Ballistix Elite 
Hard DriveHard DriveOptical DriveCooling
WD30EZRX x2 Intel 520 SSD LG Bluray Burner WH12LS39 x2 Fully Liquid Cooled 
OSMonitorKeyboardPower
Win 7 Pro Qnix QX2710 Razer Blackwidow Ultimate 2013 BF4 Edition Corsair AX760 
CaseMouseMouse Pad
Switch 810 Gunmetal G700s Steelseries 4HD 
  hide details  
Reply
post #19 of 23
You should be able to hold the bottom piece with needle nose pliars enough to use a high rpm drill like a dremel with a drill bit in it. let inertia help you haha
Home Gaming Rig
(17 items)
 
Server Computer
(11 items)
 
 
CPUMotherboardGraphicsRAM
i7-3820s @ 4.75 GHz intel DX79SR Sapphire R9 fury x  4x4 GEIL running at 2333 10-12-11-28 T1 
Hard DriveHard DriveOptical DriveCooling
samsung 850 EVO times 4 in raid 0 samsung 960 Pro samsung dvdR danger den 1366 waterblock 
OSMonitorKeyboardPower
Windows 7 Ultimate hp la2405wg old dell ps/2 Corsair HX1050 
CaseMouseMouse PadAudio
apevia xcruiser 2 microsoft intellimouse explorer 1.2A formica countertop alesis monitor one MK2 speakers 
Other
adaptec 6405 raid controller 512MB cache 
CPUMotherboardGraphicsGraphics
qx6800 @ 3.1GHz intel dx48bt2 sapphire radeon HD 5870 sapphire radeon HD 5870 
GraphicsRAMHard DriveCooling
xfx 5970 corsair low latency ddr3-1600  wd velociraptor 500GB Danger Den 775 waterblock 
OS
Windows 7 Ultimate 
  hide details  
Reply
Home Gaming Rig
(17 items)
 
Server Computer
(11 items)
 
 
CPUMotherboardGraphicsRAM
i7-3820s @ 4.75 GHz intel DX79SR Sapphire R9 fury x  4x4 GEIL running at 2333 10-12-11-28 T1 
Hard DriveHard DriveOptical DriveCooling
samsung 850 EVO times 4 in raid 0 samsung 960 Pro samsung dvdR danger den 1366 waterblock 
OSMonitorKeyboardPower
Windows 7 Ultimate hp la2405wg old dell ps/2 Corsair HX1050 
CaseMouseMouse PadAudio
apevia xcruiser 2 microsoft intellimouse explorer 1.2A formica countertop alesis monitor one MK2 speakers 
Other
adaptec 6405 raid controller 512MB cache 
CPUMotherboardGraphicsGraphics
qx6800 @ 3.1GHz intel dx48bt2 sapphire radeon HD 5870 sapphire radeon HD 5870 
GraphicsRAMHard DriveCooling
xfx 5970 corsair low latency ddr3-1600  wd velociraptor 500GB Danger Den 775 waterblock 
OS
Windows 7 Ultimate 
  hide details  
Reply
post #20 of 23
Thread Starter 
I was able to get them out with pliars after working at it a bit. Thanks for all the help guys.
Neophyte
(29 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5930k Asus X99 Rampage Edition 10 2x Zotac GTX 980Ti G.SKILL Ripjaws 4 
Hard DriveHard DriveCoolingCooling
Samsung 840 EVO 1TB 2x Seagate Barracuda 3TB (RAID1) EK Revo Dual D5 AlphaCool NexXxoS XT 45 480 
CoolingCoolingCoolingCooling
Bitspower Matte Black V3 Fittings PrimoFlex Advanced LRT Tubing Clear Mayhems Pastel Blueberry EK-XRES 250 w/ Multiport Top 
CoolingCoolingCoolingCooling
EK-Supremacy EVO Nickel Plexi 2x EK-FC TitanX/980Ti (Original CSQ) Nickel Plexi 2x EK-FC TitanX/980Ti Backplate (Black) EK HDC Nickel Fittings 
CoolingCoolingOSMonitor
EK PETG Tubing AlphaCool NexXxoS Monsta 560 Windows 10 Pro BenQ XL2420TE 24" 144 Hz 1080p 
MonitorKeyboardPowerCase
2x BenQ GL2460HM 24" 60Hz 1080p Ducky DK2108SZ Black Seasonic X-1050 80+ Platinum Case Labs SMA8 
MouseAudioAudioAudio
Razer DeathAdder FX Audio DAC-X6 AKG K7XX (Mass Drop Limited Edition) MXL V67GS Condenser Mic 
Audio
MXL MicMate Pro 
  hide details  
Reply
Neophyte
(29 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5930k Asus X99 Rampage Edition 10 2x Zotac GTX 980Ti G.SKILL Ripjaws 4 
Hard DriveHard DriveCoolingCooling
Samsung 840 EVO 1TB 2x Seagate Barracuda 3TB (RAID1) EK Revo Dual D5 AlphaCool NexXxoS XT 45 480 
CoolingCoolingCoolingCooling
Bitspower Matte Black V3 Fittings PrimoFlex Advanced LRT Tubing Clear Mayhems Pastel Blueberry EK-XRES 250 w/ Multiport Top 
CoolingCoolingCoolingCooling
EK-Supremacy EVO Nickel Plexi 2x EK-FC TitanX/980Ti (Original CSQ) Nickel Plexi 2x EK-FC TitanX/980Ti Backplate (Black) EK HDC Nickel Fittings 
CoolingCoolingOSMonitor
EK PETG Tubing AlphaCool NexXxoS Monsta 560 Windows 10 Pro BenQ XL2420TE 24" 144 Hz 1080p 
MonitorKeyboardPowerCase
2x BenQ GL2460HM 24" 60Hz 1080p Ducky DK2108SZ Black Seasonic X-1050 80+ Platinum Case Labs SMA8 
MouseAudioAudioAudio
Razer DeathAdder FX Audio DAC-X6 AKG K7XX (Mass Drop Limited Edition) MXL V67GS Condenser Mic 
Audio
MXL MicMate Pro 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Can't remove my water block