Overclock.net › Forums › Case Mods & Cases › Computer Cases › In Win 303 Owners Club
New Posts  All Forums:Forum Nav:

In Win 303 Owners Club - Page 153

post #1521 of 1712
Quote:
Originally Posted by dogsofwar909 View Post

Curious what you guys think about this, as it's proving very good results for me so far. Switched over to a Cryorig H7 over my AIO (Deepcool Gamerstorm, H100i GTX, Thermaltake Water 3 360) due to 3 pump issues on 3 different models, and it's basically worry free..



Intake from bottom and rear, fans on the heatsink are pointed right

Exhaust from the two visible up top and one 140mm touching the rear panel (because those cut outs are NOT airflow oriented)
Silverstone dense mesh magnetic fan filter on the rear fan.

-5c over having the standard exhaust layout to the back when playing Dirt Rally, which seems to be pretty intensive on both cpu and gpu temp wise with this case.


Also, 1.2v drooped to 1.14 during load with a 7700k stable at stock 4.5ghz. Tickle me pink. 72c on air max. 69c on water max.
the back fan is a 140mm fan? mine will look very similar but i also have all three top fans up front for looks. also going with a slightly bigger air cooler PHANTEKS PH-TC14PE or nh-d15s amazon is leting me order both and i can return which ever I don't like
post #1522 of 1712
Finally could start my 'quiet' 303 build! Today I sprayed the inside white. It's looking much better that way IMO.

The system will be much like my current X99 system initially. But it will have a quieter PSU, sound dampening materials, 420+360 rad, hard tubing and rubber mountings for the pump.
     
CPUMotherboardGraphicsRAM
5820K @ 4.4Ghz MSI X99A SLI Plus EVGA Geforce 1080 SC Kingston HyperX Fury 4x8Gb 2666Ghz 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 256Gb Samsung 840 Evo 250Gb Sandisk Ultra II 960Gb EK XRES 14​0 Revo D5 ​PWM pump +​ res 
CoolingCoolingCoolingCooling
EK X99 Supremacy EVO waterblock (Full Nickel) 5x EK 140mm Vardar F1 fans 3x EK 120mm Vardar F1 fans Hardware Labs GTS X-Flow 420 Radiator 
CoolingCoolingCoolingOS
Hardware Labs GTS 360 White Radiator Aquaero 6LT pump / fan controller EK 1080 Full Cover Block (Nickel / Acetal) Windows 10 
MonitorKeyboardPowerCase
Asus PG279Q ROG Swift 27.0" Corsair K70 RGB Corsair RM650x In Win 303 
MouseMouse PadAudioAudio
Zowie FK2 Zowie P-SR Dragonfly DAC Oppo PM3 Planar Closed Headphone 
Other
NZXT Hue+ RGB controller / LEDs 
CPUMotherboardGraphicsRAM
4690K @ 4.5Ghz Gigabyte GA Z97N Wifi (ITX) EVGA Geforce 1060 SC 3Gb G.Skill Ripjaws 2x8Gb DDR3-2400 
Hard DriveHard DriveCoolingCooling
Samsung 840 EVO 250Gb Seagate Barracuda 1TB 7200RPM 2x EK 120mm Vardar F1 (radiator) fans 2x 140mm Silent Wings 3 (case) fans 
CoolingCoolingCoolingCooling
Aquaero 5LT pump/fan controller & sensors Hardware Labs GTS 240 Radiator EK D5+140 Pump/Reservoir EK Supremacy EVO CPU waterblock 
CoolingCoolingOSKeyboard
EK Thermosphere Generic GPU waterblock EK Duraclear tubing & fittings Windows 10 Logitech K400 Plus Wireless Keyboard 
PowerCaseAudio
Silverstone Strider Platinum 750W Fractal Design Define Nano S Arcam IrDac 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
5820K @ 4.4Ghz MSI X99A SLI Plus EVGA Geforce 1080 SC Kingston HyperX Fury 4x8Gb 2666Ghz 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 256Gb Samsung 840 Evo 250Gb Sandisk Ultra II 960Gb EK XRES 14​0 Revo D5 ​PWM pump +​ res 
CoolingCoolingCoolingCooling
EK X99 Supremacy EVO waterblock (Full Nickel) 5x EK 140mm Vardar F1 fans 3x EK 120mm Vardar F1 fans Hardware Labs GTS X-Flow 420 Radiator 
CoolingCoolingCoolingOS
Hardware Labs GTS 360 White Radiator Aquaero 6LT pump / fan controller EK 1080 Full Cover Block (Nickel / Acetal) Windows 10 
MonitorKeyboardPowerCase
Asus PG279Q ROG Swift 27.0" Corsair K70 RGB Corsair RM650x In Win 303 
MouseMouse PadAudioAudio
Zowie FK2 Zowie P-SR Dragonfly DAC Oppo PM3 Planar Closed Headphone 
Other
NZXT Hue+ RGB controller / LEDs 
CPUMotherboardGraphicsRAM
4690K @ 4.5Ghz Gigabyte GA Z97N Wifi (ITX) EVGA Geforce 1060 SC 3Gb G.Skill Ripjaws 2x8Gb DDR3-2400 
Hard DriveHard DriveCoolingCooling
Samsung 840 EVO 250Gb Seagate Barracuda 1TB 7200RPM 2x EK 120mm Vardar F1 (radiator) fans 2x 140mm Silent Wings 3 (case) fans 
CoolingCoolingCoolingCooling
Aquaero 5LT pump/fan controller & sensors Hardware Labs GTS 240 Radiator EK D5+140 Pump/Reservoir EK Supremacy EVO CPU waterblock 
CoolingCoolingOSKeyboard
EK Thermosphere Generic GPU waterblock EK Duraclear tubing & fittings Windows 10 Logitech K400 Plus Wireless Keyboard 
PowerCaseAudio
Silverstone Strider Platinum 750W Fractal Design Define Nano S Arcam IrDac 
  hide details  
Reply
post #1523 of 1712
Demon09, All fans are limited to 120mm unfortunately. I had 3 top exhaust fans before I had this cooler delivered for aesthetics as well, but wasn't super content with hot air being forced into my psu.

Just make double sure it'll fit because this case has a maximum cooler height limit of 160mm. Let me know if either of those work because a bigger heatsink would be grand.
In Win 303
(9 items)
 
  
CPUMotherboardGraphicsRAM
i7 7700k Gigabyte Z270X Designare Evga GTX 980ti FTW Corsair Vengeance  
Hard DriveCoolingOSPower
Seagate  Deepcool Gamerstorm ex 240 AIO Win 10  Corsair RM750 
Case
In Win 303 
  hide details  
Reply
In Win 303
(9 items)
 
  
CPUMotherboardGraphicsRAM
i7 7700k Gigabyte Z270X Designare Evga GTX 980ti FTW Corsair Vengeance  
Hard DriveCoolingOSPower
Seagate  Deepcool Gamerstorm ex 240 AIO Win 10  Corsair RM750 
Case
In Win 303 
  hide details  
Reply
post #1524 of 1712
Quote:
Originally Posted by demon09 View Post

the back fan is a 140mm fan? mine will look very similar but i also have all three top fans up front for looks. also going with a slightly bigger air cooler PHANTEKS PH-TC14PE or nh-d15s amazon is leting me order both and i can return which ever I don't like




Before the pump failed and I went air.
In Win 303
(9 items)
 
  
CPUMotherboardGraphicsRAM
i7 7700k Gigabyte Z270X Designare Evga GTX 980ti FTW Corsair Vengeance  
Hard DriveCoolingOSPower
Seagate  Deepcool Gamerstorm ex 240 AIO Win 10  Corsair RM750 
Case
In Win 303 
  hide details  
Reply
In Win 303
(9 items)
 
  
CPUMotherboardGraphicsRAM
i7 7700k Gigabyte Z270X Designare Evga GTX 980ti FTW Corsair Vengeance  
Hard DriveCoolingOSPower
Seagate  Deepcool Gamerstorm ex 240 AIO Win 10  Corsair RM750 
Case
In Win 303 
  hide details  
Reply
post #1525 of 1712
Quote:
Originally Posted by dogsofwar909 View Post

Demon09, All fans are limited to 120mm unfortunately. I had 3 top exhaust fans before I had this cooler delivered for aesthetics as well, but wasn't super content with hot air being forced into my psu.

Just make double sure it'll fit because this case has a maximum cooler height limit of 160mm. Let me know if either of those work because a bigger heatsink would be grand.
the nh-d15s is 160mm on the dot but you can't run a side fan as lifting up for ram will up the height. Same thing for the phantec middle fan will keep it's height down with a different screw in the middle to allow you tolower it. You may be able to run them with a fan on the opposite side of the ram slots on them though. I will let you know for sure once I get them fingers crossed on phantec working as it's colors look nicer then the nh-d15s
post #1526 of 1712
Halfway (hopefully) through my 303 build. It's suddenly quite a 'small' case to work wanting to go with 420 + 360, but it's filling out quite nicely IMO. The only thing I don't like is the lack of 2.5" SSD brackets at the back. And 140mm support.. it's a great case for mATX and dual slim 420 rads.

This build is my first time with PETG tubing. Have to redo one section now as it was dodgy and leaking. Photos:

(1) Current state. The top rad still needs fans. It's getting 5 fans for push/pull (exhaust). The bottom is pull only.
(2) Found a good spot for the Aquaero 6 pump/fan controller.

Edited by 44TZL - 4/10/17 at 7:17am
     
CPUMotherboardGraphicsRAM
5820K @ 4.4Ghz MSI X99A SLI Plus EVGA Geforce 1080 SC Kingston HyperX Fury 4x8Gb 2666Ghz 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 256Gb Samsung 840 Evo 250Gb Sandisk Ultra II 960Gb EK XRES 14​0 Revo D5 ​PWM pump +​ res 
CoolingCoolingCoolingCooling
EK X99 Supremacy EVO waterblock (Full Nickel) 5x EK 140mm Vardar F1 fans 3x EK 120mm Vardar F1 fans Hardware Labs GTS X-Flow 420 Radiator 
CoolingCoolingCoolingOS
Hardware Labs GTS 360 White Radiator Aquaero 6LT pump / fan controller EK 1080 Full Cover Block (Nickel / Acetal) Windows 10 
MonitorKeyboardPowerCase
Asus PG279Q ROG Swift 27.0" Corsair K70 RGB Corsair RM650x In Win 303 
MouseMouse PadAudioAudio
Zowie FK2 Zowie P-SR Dragonfly DAC Oppo PM3 Planar Closed Headphone 
Other
NZXT Hue+ RGB controller / LEDs 
CPUMotherboardGraphicsRAM
4690K @ 4.5Ghz Gigabyte GA Z97N Wifi (ITX) EVGA Geforce 1060 SC 3Gb G.Skill Ripjaws 2x8Gb DDR3-2400 
Hard DriveHard DriveCoolingCooling
Samsung 840 EVO 250Gb Seagate Barracuda 1TB 7200RPM 2x EK 120mm Vardar F1 (radiator) fans 2x 140mm Silent Wings 3 (case) fans 
CoolingCoolingCoolingCooling
Aquaero 5LT pump/fan controller & sensors Hardware Labs GTS 240 Radiator EK D5+140 Pump/Reservoir EK Supremacy EVO CPU waterblock 
CoolingCoolingOSKeyboard
EK Thermosphere Generic GPU waterblock EK Duraclear tubing & fittings Windows 10 Logitech K400 Plus Wireless Keyboard 
PowerCaseAudio
Silverstone Strider Platinum 750W Fractal Design Define Nano S Arcam IrDac 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
5820K @ 4.4Ghz MSI X99A SLI Plus EVGA Geforce 1080 SC Kingston HyperX Fury 4x8Gb 2666Ghz 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 256Gb Samsung 840 Evo 250Gb Sandisk Ultra II 960Gb EK XRES 14​0 Revo D5 ​PWM pump +​ res 
CoolingCoolingCoolingCooling
EK X99 Supremacy EVO waterblock (Full Nickel) 5x EK 140mm Vardar F1 fans 3x EK 120mm Vardar F1 fans Hardware Labs GTS X-Flow 420 Radiator 
CoolingCoolingCoolingOS
Hardware Labs GTS 360 White Radiator Aquaero 6LT pump / fan controller EK 1080 Full Cover Block (Nickel / Acetal) Windows 10 
MonitorKeyboardPowerCase
Asus PG279Q ROG Swift 27.0" Corsair K70 RGB Corsair RM650x In Win 303 
MouseMouse PadAudioAudio
Zowie FK2 Zowie P-SR Dragonfly DAC Oppo PM3 Planar Closed Headphone 
Other
NZXT Hue+ RGB controller / LEDs 
CPUMotherboardGraphicsRAM
4690K @ 4.5Ghz Gigabyte GA Z97N Wifi (ITX) EVGA Geforce 1060 SC 3Gb G.Skill Ripjaws 2x8Gb DDR3-2400 
Hard DriveHard DriveCoolingCooling
Samsung 840 EVO 250Gb Seagate Barracuda 1TB 7200RPM 2x EK 120mm Vardar F1 (radiator) fans 2x 140mm Silent Wings 3 (case) fans 
CoolingCoolingCoolingCooling
Aquaero 5LT pump/fan controller & sensors Hardware Labs GTS 240 Radiator EK D5+140 Pump/Reservoir EK Supremacy EVO CPU waterblock 
CoolingCoolingOSKeyboard
EK Thermosphere Generic GPU waterblock EK Duraclear tubing & fittings Windows 10 Logitech K400 Plus Wireless Keyboard 
PowerCaseAudio
Silverstone Strider Platinum 750W Fractal Design Define Nano S Arcam IrDac 
  hide details  
Reply
post #1527 of 1712
Finally got everything bled and am pleased with the results so far.
My rig
(18 items)
 
  
CPUMotherboardGraphicsRAM
7700k MSI Z270 gaming M5 Zotac 1080TI FE w/ EK Block Corsair Vengeance 16GB DDR4-3200 
Hard DriveCoolingOSMonitor
samsung 512gb 960 pro EKWB 360rad+280rad Windows 10 64bit Pro Dell S2417DG 
MonitorMonitorKeyboardPower
Dell U2412M Samsung JU7100 40" OCN ducky shine SeaSonic PRIME 650W 
CaseMouseAudioAudio
IN Win 303 Corsair scimitar Creative X7 Audio Technica ATH-AD900 
  hide details  
Reply
My rig
(18 items)
 
  
CPUMotherboardGraphicsRAM
7700k MSI Z270 gaming M5 Zotac 1080TI FE w/ EK Block Corsair Vengeance 16GB DDR4-3200 
Hard DriveCoolingOSMonitor
samsung 512gb 960 pro EKWB 360rad+280rad Windows 10 64bit Pro Dell S2417DG 
MonitorMonitorKeyboardPower
Dell U2412M Samsung JU7100 40" OCN ducky shine SeaSonic PRIME 650W 
CaseMouseAudioAudio
IN Win 303 Corsair scimitar Creative X7 Audio Technica ATH-AD900 
  hide details  
Reply
post #1528 of 1712
Quote:
Originally Posted by demon09 View Post

the back fan is a 140mm fan? mine will look very similar but i also have all three top fans up front for looks. also going with a slightly bigger air cooler PHANTEKS PH-TC14PE or nh-d15s amazon is leting me order both and i can return which ever I don't like
phantek one fit with just the middle fan had to replace the middle bracket thumb screw with an HHD screw. If you had ram without heatsinks you may manage to get the second one on the ram side. Also I may try your set up making the rear exhaust into an intake.not the prettiest build but I like the reliability and simplicity of air coolers
Edited by demon09 - 4/10/17 at 2:26pm
post #1529 of 1712



Making some progress with the new case, loving it so far.

Not much room at the bottom between the fans and GPU. The one bottom fan is blowing directly on the GPU, that shouldn't effect the GPU fans would it?

Also need to figure out that ugly CPU cooler, wish they made that hole a bit bigger to fit the CPU block through to the backside of the case.

Has anyone installed a corsair h100i in this beast?
post #1530 of 1712
Quote:
Originally Posted by bms44 View Post




Making some progress with the new case, loving it so far.

Not much room at the bottom between the fans and GPU. The one bottom fan is blowing directly on the GPU, that shouldn't effect the GPU fans would it?

Also need to figure out that ugly CPU cooler, wish they made that hole a bit bigger to fit the CPU block through to the backside of the case.

Has anyone installed a corsair h100i in this beast?
might be worthwhile in you're case to use the back exhaust as an intake with a filter on the outside. As the fan blowing into the gpu will really push no air into the rest of the case. I have seen a guy who dremmled out the hole so he could fit his aio behind it though. Nice adds btw
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › In Win 303 Owners Club