Overclock.net › Forums › Case Mods & Cases › Computer Cases › In Win 303 Owners Club
New Posts  All Forums:Forum Nav:

In Win 303 Owners Club - Page 3

post #21 of 2261
So anyone with a Corsair H100i might have an issue with this case.

The tubes stick out too much and hit the window. It can still work, but it's putting quite a bit of pressure on the window and the tubes.

EDIT: Using a zip tie as suggested by another forum member works great. Just zip tie the hoses to the case and you won't have an issue.



Truth be told I didn't really want to install the radiator on the front of the grill anyway, but actually behind it. The problem is, the cutout in the case ins't big enough for the CPU block to fit through, as it's designed for cables.



I went ahead and taped off the hole.



Then decided to enlarge the hole with a dremel tool, so the CPU block could fit through.



It works, though I will say it's a super tight squeeze when you install the power supply. My EVGA 750w G2 is 7" long, anything longer would not have worked.



I couldn't use any of the screw tracks for mounting the radiator, as I had to push it as far to the front of the case as I could. Tightening the fans in the front keep it in place pretty tight, so it's really not needed.


Edited by Face2Face - 6/21/16 at 2:21pm
post #22 of 2261
Thread Starter 
Be sure to read the Inwin 303 review and specification & information (click to show) on the front page.




Quote:
Originally Posted by paskowitz View Post

Awesome. An EK XE 360 rad w/ fans will fit. That is good to know.


But with 3.75" of clearance an EK XE 360 radiator with fans will fit.

Tomorrow I receive my in win 303 case but with my luck with carriers it will probably be Monday.
post #23 of 2261
Thread Starter 
Caseking.de






They used zip ties on the tubes and placed the fans on the same side as the psu.
post #24 of 2261
Quote:
Originally Posted by Lyxchoklad View Post

Caseking.de


They used zip ties on the tubes and placed the fans on the same side as the psu.

Yeah I have a Thermaltake Water 2.0 240mm as well, and that fits fine as the tubes are more flexible. I missing some installation pieces, that's why I chose to stick with the H100i. While I didn't want to cut my new case, I'm actually pleased with how the radiator mounting on the back turned out.

I hope you get your case tomorrow.
Edited by Face2Face - 6/9/16 at 11:11am
post #25 of 2261
Thread Starter 
Quote:
Originally Posted by Face2Face View Post

Yeah I have a Thermaltake Water 2.0 240mm as well, and that fits fine as the tubes are more flexible. I missing some installation pieces, that's why I chose to stick with the H100i. While I didn't want to cut my new case, I'm actually pleased with how the radiator mounting on the back turned out.

I hope you get your case tomorrow.







Your hidden rad mod is outstanding and gives the in win 303 a cleaner appearance. thumb.gif I'll add a photo of your build to the front page when you are done.
post #26 of 2261
Quote:
Originally Posted by Lyxchoklad View Post



Your hidden rad mod is outstanding and gives the in win 303 a cleaner appearance. thumb.gif I'll add a photo of your build to the front page when you are done.

Thanks man. I have a feeling the cable management is going to take awhile, so it won't be today. Hopefully by the weekend.
post #27 of 2261
Quote:
Originally Posted by Face2Face View Post

Thanks man. Here is an image of the clearance. It's right there at it. Very close.


Thanks. It's a bit hard to tell from this angle how high the fan actually goes relative to the slots. Would you be able to put something flat on top of the fan that extends over to the slot covers?
post #28 of 2261

I didn't even have to post in here and my build has made it :D

 

8243e1a6_ek-pax-east-2016.jpeg

 

I did this one for PAX East and let me tell you, this case is a dream for new liquid coolers. For a relatively small size and the unbeatable price of $89 you can fit two 360 radiators! Andy hadn't told me the price until after I did the build and I would have guessed easily $150-200, when he told me $89 I didn't believe him. Anyway, fun build, definitely an unbeatable case at the price point :)

Verktøy Cu
(20 items)
 
XForma MBX MKII
(18 items)
 
 
CPUCPUMotherboardGraphics
Intel Xeon E5-2670 V4 Intel Xeon E5-2670 V4 Asus Z10PE-D8 WS Nvidia Titan X 
GraphicsGraphicsGraphicsRAM
Nvidia Titan X Nvidia Titan X Nvidia Titan X 128GB of Kingston DDR4 ECC 2133Mhz 
Hard DriveHard DriveHard DriveHard Drive
Intel 750 NVME 1.2TB U.2 Intel 750 NVME 1.2TB AIC Intel 750 NVME 1.2TB AIC Intel 750 NVME 1.2TB AIC 
CoolingOSMonitorKeyboard
EK Water Blocks Windows 10 Pro Dell UP2715K Cherry MX 6.0 
PowerCaseMouseAudio
Corsair AX1500i Case Labs S8 Logitech MX Master Pioneer SE-L40 
CPUMotherboardGraphicsGraphics
Intel 5960X Asus Rampage V Extreme Nvidia Titan X Nvidia Titan X 
GraphicsRAMHard DriveHard Drive
Nvidia Titan X Corsair Dominator Platinum 4x8GB 2400Mhz (2) Intel 530 180GB (2) HGST 4TB 
Optical DriveCoolingOSMonitor
Blu-Ray Slot Load EK Water Blocks Liquid Cooling Windows 8.1 Dell UP2715K 
KeyboardPowerCaseMouse
Ducky OCN Blues Seasonic 1200W Platinum XForma MBX MKII TBD 
AudioAudio
Asus Xonar Essence One (2) Mackie MR5MK2 
  hide details  
Reply
Verktøy Cu
(20 items)
 
XForma MBX MKII
(18 items)
 
 
CPUCPUMotherboardGraphics
Intel Xeon E5-2670 V4 Intel Xeon E5-2670 V4 Asus Z10PE-D8 WS Nvidia Titan X 
GraphicsGraphicsGraphicsRAM
Nvidia Titan X Nvidia Titan X Nvidia Titan X 128GB of Kingston DDR4 ECC 2133Mhz 
Hard DriveHard DriveHard DriveHard Drive
Intel 750 NVME 1.2TB U.2 Intel 750 NVME 1.2TB AIC Intel 750 NVME 1.2TB AIC Intel 750 NVME 1.2TB AIC 
CoolingOSMonitorKeyboard
EK Water Blocks Windows 10 Pro Dell UP2715K Cherry MX 6.0 
PowerCaseMouseAudio
Corsair AX1500i Case Labs S8 Logitech MX Master Pioneer SE-L40 
CPUMotherboardGraphicsGraphics
Intel 5960X Asus Rampage V Extreme Nvidia Titan X Nvidia Titan X 
GraphicsRAMHard DriveHard Drive
Nvidia Titan X Corsair Dominator Platinum 4x8GB 2400Mhz (2) Intel 530 180GB (2) HGST 4TB 
Optical DriveCoolingOSMonitor
Blu-Ray Slot Load EK Water Blocks Liquid Cooling Windows 8.1 Dell UP2715K 
KeyboardPowerCaseMouse
Ducky OCN Blues Seasonic 1200W Platinum XForma MBX MKII TBD 
AudioAudio
Asus Xonar Essence One (2) Mackie MR5MK2 
  hide details  
Reply
post #29 of 2261
My case came in last night and I was pretty surprised at the build quality for the price. It felt very premium. I will post some pictures later but I plan to put 2 EK 360 PE radiators in the case with push fans and one intake fan in the back. Just working on which fans to order tongue.gif
 
CRE-8T 00-01
(11 items)
 
 
CPUMotherboardGraphicsRAM
Intel 3.4Ghz i5 3570K [OC 4.5Ghz] ASUS P8Z77-V Pro Gigabyte 980 Ti G1 Gaming  G.SKILL Ripjaws Z Series 16GB 2133 
Hard DriveHard DriveCoolingOS
Samsung 830 SSD  WB Black 2TB H100  Windows 7 Home Premium  
MonitorKeyboardPowerCase
LG 27MP33HQ 27" RAZER BlackWidow Ultimate Mechanical SeaSonic X750 Gold 750W Power Supply In Win 303 
Mouse
RAZER Copperhead 
CPUMotherboardGraphicsGraphics
Xeon X5460 EVGA i780 SLi Sapphire 7870 Ghz OC Sapphire 7870 Ghz OC 
RAMHard DriveCoolingOS
Kingston HyperX DDR2 [4x2GB] Kingston SSDNow V300 120gb H100i Windows 7 64bit 
PowerCaseMouse
Thermaltake Toughpower 850W  Corsair 200R Razer Copperhead  
  hide details  
Reply
 
CRE-8T 00-01
(11 items)
 
 
CPUMotherboardGraphicsRAM
Intel 3.4Ghz i5 3570K [OC 4.5Ghz] ASUS P8Z77-V Pro Gigabyte 980 Ti G1 Gaming  G.SKILL Ripjaws Z Series 16GB 2133 
Hard DriveHard DriveCoolingOS
Samsung 830 SSD  WB Black 2TB H100  Windows 7 Home Premium  
MonitorKeyboardPowerCase
LG 27MP33HQ 27" RAZER BlackWidow Ultimate Mechanical SeaSonic X750 Gold 750W Power Supply In Win 303 
Mouse
RAZER Copperhead 
CPUMotherboardGraphicsGraphics
Xeon X5460 EVGA i780 SLi Sapphire 7870 Ghz OC Sapphire 7870 Ghz OC 
RAMHard DriveCoolingOS
Kingston HyperX DDR2 [4x2GB] Kingston SSDNow V300 120gb H100i Windows 7 64bit 
PowerCaseMouse
Thermaltake Toughpower 850W  Corsair 200R Razer Copperhead  
  hide details  
Reply
post #30 of 2261
Quote:
Originally Posted by derickwm View Post

I didn't even have to post in here and my build has made it biggrin.gif


I did this one for PAX East and let me tell you, this case is a dream for new liquid coolers. For a relatively small size and the unbeatable price of $89 you can fit two 360 radiators! Andy hadn't told me the price until after I did the build and I would have guessed easily $150-200, when he told me $89 I didn't believe him. Anyway, fun build, definitely an unbeatable case at the price point smile.gif

Amazing job man! It's beautiful thumb.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › In Win 303 Owners Club