Overclock.net › Forums › Case Mods & Cases › Computer Cases › In Win 303 Owners Club
New Posts  All Forums:Forum Nav:

In Win 303 Owners Club - Page 22

post #211 of 2261
Quote:
Originally Posted by atomicus View Post

I'm going for same rads. Those are case fans aren't they?
For me fan is a fan. Enermax/lepa are one of few producers that tell specs that are not so far away from what fans are capable of. + they are cheap wink.gif
post #212 of 2261
Quote:
Originally Posted by prznar1 View Post

For me fan is a fan. Enermax/lepa are one of few producers that tell specs that are not so far away from what fans are capable of. + they are cheap wink.gif

A fan is most definitely NOT a fan indistinguishable from others. That's like entering a race and saying "meh, a car is just a car" lol! Performance will vary significantly depending what you use, but particularly if you are using case fans on a rad and vice versa. It also depends on the specific rad and fans used, the speed of the fans and fin density of the rad.

smile.gif
Edited by atomicus - 7/17/16 at 3:22am
I AM TITANIUM
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-6800K MSI X99A XPower Gaming Titanium EVGA GeForce GTX 1080 FOUNDERS EDITION Corsair Dominator Platinum 32GB (4x8GB) 3000MHz... 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 256GB M.2 SanDisk Ultra II SSD 960GB Hynix SSD 500GB EKWB Custom loop 
OSMonitorKeyboardCase
Windows 10 Pro 64bit Acer Predator X34 Logitech K800 InWin 303 
MouseMouse PadAudio
Logitech G900 Corsair MM300 Sennheiser DT 990 Pro (250OHM) 
  hide details  
Reply
I AM TITANIUM
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-6800K MSI X99A XPower Gaming Titanium EVGA GeForce GTX 1080 FOUNDERS EDITION Corsair Dominator Platinum 32GB (4x8GB) 3000MHz... 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 256GB M.2 SanDisk Ultra II SSD 960GB Hynix SSD 500GB EKWB Custom loop 
OSMonitorKeyboardCase
Windows 10 Pro 64bit Acer Predator X34 Logitech K800 InWin 303 
MouseMouse PadAudio
Logitech G900 Corsair MM300 Sennheiser DT 990 Pro (250OHM) 
  hide details  
Reply
post #213 of 2261
I am aware of that, but im not going to spend more then a radiator. Atleast for now. Maybe one day i will buy 3 fans that are best for radiator, but today its not that day smile.gif
post #214 of 2261
@skimbro im using the h100iv2 and asus z170-a
post #215 of 2261
Hi folks, just wanted to share what i just did today for the InWin 303...boy this case is the best value for the money hands down, i would pay $150 for this easily...working on it was rather difficult because the steel plates are twice as thick as normal cases...i had to drill a 1" hold to the bottom chamber to run my outlet line from the pump..i had to widen the hole for the rad inlet so i could fit a 420mm rad in there...the 420mm rad fills the case out a lot better than a 360, but it's not easy to fit in. The top 3 fans are 360mm together, notice how much gape there is to either side...


Finally, i fabricated a bracket and used a PCI riser card to mount the video card vertically, so i'm able to see the liquid flow through it...i'm not done yet, will add LEDs and light up the case..and LEDs to light up the video card, and sleeve the pump cables and cover up the empty PCI slots...let me know what you guys think.


InWin, this is the orientation you guys should've made it...made me work so hard to make it happen smile.gif...please hire me as the next design engineer i have lots of ideas for cases...



28379282735_0ce7e60001_b.jpg


28096330790_f612516888_b.jpg

28378699375_466d4c64d9_h.jpg
Edited by FXformat - 7/17/16 at 8:04pm
Cypher
(5 items)
 
  
CPUMotherboardGraphicsCooling
7700K Asus Strix Z270G EVGA GTX 1080 FTW EK Watercooled 
Case
Lian Li PC-O6S 
  hide details  
Reply
Cypher
(5 items)
 
  
CPUMotherboardGraphicsCooling
7700K Asus Strix Z270G EVGA GTX 1080 FTW EK Watercooled 
Case
Lian Li PC-O6S 
  hide details  
Reply
post #216 of 2261
Hi guys,

So after a couple weeks with this case right next to me on the desk I really love how it looks more and more. However I seem to keep having negative pressure no matter how I configure my fans. Right now I have 3 Corsair AF120s at the bottom as intake running at constant 1300 RPM, 1 Corsair AF120 in the back as exhaust at constant 750 rpm, and 2 Corsair SP120 on the corsair H100i v2 radiator mounted on top as exhaust and that run in smart mode ranging from 50%-100%. Should I change all the fans to PWM mode? It's at w/e the mobo as them as default.

PS: What's up with everyone running this case upside down? Should've just gotten Corsair 600C haha.
post #217 of 2261
Quote:
Originally Posted by luan87us View Post

Hi guys,

So after a couple weeks with this case right next to me on the desk I really love how it looks more and more. However I seem to keep having negative pressure no matter how I configure my fans. Right now I have 3 Corsair AF120s at the bottom as intake running at constant 1300 RPM, 1 Corsair AF120 in the back as exhaust at constant 750 rpm, and 2 Corsair SP120 on the corsair H100i v2 radiator mounted on top as exhaust and that run in smart mode ranging from 50%-100%. Should I change all the fans to PWM mode? It's at w/e the mobo as them as default.

PS: What's up with everyone running this case upside down? Should've just gotten Corsair 600C haha.



Corsair 600C looks like complete butt...this case looks better upside down with the radiator orientation on the bottom thumb.gif
Cypher
(5 items)
 
  
CPUMotherboardGraphicsCooling
7700K Asus Strix Z270G EVGA GTX 1080 FTW EK Watercooled 
Case
Lian Li PC-O6S 
  hide details  
Reply
Cypher
(5 items)
 
  
CPUMotherboardGraphicsCooling
7700K Asus Strix Z270G EVGA GTX 1080 FTW EK Watercooled 
Case
Lian Li PC-O6S 
  hide details  
Reply
post #218 of 2261
Quote:
Originally Posted by FXformat View Post

Corsair 600C looks like complete butt...this case looks better upside down with the radiator orientation on the bottom thumb.gif

Haha true that. Plus this has real tempered glass not acrylic I guess. Do you guys run the radiator fans as exhaust in that config then?
post #219 of 2261
Quote:
Originally Posted by luan87us View Post

Haha true that. Plus this has real tempered glass not acrylic I guess. Do you guys run the radiator fans as exhaust in that config then?


Yes, well it's rather confusing because of the way the rad is sitting...but my top 3 are intakes, my side fan is intake, and my 420mm radiator is exhausting air out the back....i set my intakes to 800rpms, the triple 140s at 1000 RPM...and with the lid on, and gaming in 4K, it hasn't gotten above 40 degrees C on the GPU, CPU hasn't passed 38C...so i think it's working.
Cypher
(5 items)
 
  
CPUMotherboardGraphicsCooling
7700K Asus Strix Z270G EVGA GTX 1080 FTW EK Watercooled 
Case
Lian Li PC-O6S 
  hide details  
Reply
Cypher
(5 items)
 
  
CPUMotherboardGraphicsCooling
7700K Asus Strix Z270G EVGA GTX 1080 FTW EK Watercooled 
Case
Lian Li PC-O6S 
  hide details  
Reply
post #220 of 2261
Quote:
Originally Posted by FXformat View Post

Yes, well it's rather confusing because of the way the rad is sitting...but my top 3 are intakes, my side fan is intake, and my 420mm radiator is exhausting air out the back....i set my intakes to 800rpms, the triple 140s at 1000 RPM...and with the lid on, and gaming in 4K, it hasn't gotten above 40 degrees C on the GPU, CPU hasn't passed 38C...so i think it's working.

By the side fan are you referring to the one in the back? That's very interesting set up indeed. I might have to switch that one around to see if I see a change in my CPU temp. My CPU is running very warm atm (up to 75C while gaming) even though I'm only running 4.6ghz at 1.29v vcore. Although I might have messed up the TIM on my corsair h100i during installation because I was wiggling it a bit to get it sit straight on the brackets after it already contacted the CPU surface. Got some Geelid extreme coming in today so I'll be reinstalling it to make sure I don't have a defective h100i.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › In Win 303 Owners Club