Overclock.net › Forums › Graphics Cards › NVIDIA › Gainward 970 Phantom + Corsair inverse case (600Q / 600C) = Sagging
New Posts  All Forums:Forum Nav:

Gainward 970 Phantom + Corsair inverse case (600Q / 600C) = Sagging

post #1 of 2
Thread Starter 
My Gainward 970 Phantom has been installed in the 600Q by Corsair

The problem with this card is when it is upright the shroud is supported by the IO plate, there are no fixings on the bottom of the plate at all it is expected to fall onto it and rest on a small lip.

Upside down it just sags REALLY bad, its actually a pretty flimsy card, although nice and quiet in my 600Q.

The annoying thing is regular way round its totally horizontal but this case does this to it doh.gif

Is there anything I can do about this?

Will the heavy sag permanently alter the card? Or even damage and bend it?

Any advice appreciated - see image for the sag laughingsmiley.gif

post #2 of 2
Thread Starter 
Will my card permanently sag if it stays like this?

Thinking of resale problems....
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA
Overclock.net › Forums › Graphics Cards › NVIDIA › Gainward 970 Phantom + Corsair inverse case (600Q / 600C) = Sagging