post #1 of 1
Thread Starter 
In the bios I can't figure out the settings. This is what I have set for 1600 speeds for the Memory and it doesn't boot.

CPU RATIO = 20
BCLK = 160
QPI = Auto
DRAM frq = 1600

Timings:
tCL=9
tRCD=9
tRP=9
tRAS=24
tWR=10
tWTR=5
tRTP=5
tRFC=40
tFAW=20
CR=2T

DRAM read latency = Auto
DRAM Write Latency = Auto

Intel Speedstep = Disabled
C1E Support = Disabled
Intel Virtualization = Disabled

Voltages:
Vcore = Auto
VTT = 1.21
PLL = Auto
DRAM = 1.645
PCH = 1.10
IGD = Auto

I also need to understand the FSB:Ratio's. I'm assuming to go 1:1 I set the DRAM Freq to 1600 for 1:1 (options are AUTO, 960, 1280, 1600)

Anyone toss out some opinions? I can run the software OC utility and it puts the CPU around 3500mhz. I think I don't understand the FSB ratio or QPI stuff.
o.png