Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Case Mod Work Logs › (Build log) Parvum Project rVe10
New Posts  All Forums:Forum Nav:

(Build log) Parvum Project rVe10 - Page 8

post #71 of 242
Subbed, eager to see this build finished biggrin.gif
post #72 of 242
Thread Starter 
Quote:
Originally Posted by DarkIdeals View Post

Very nice! I ordered three of the Corsair ML120 Pro white LED versions last weekend, they get here monday due to slow as heck shipping. Can't wait to try them out. How are they comparing temp-wise to the SP120's in your opinion? Have you had a chance to compare noise at same RPM too btw?

Overall they appear to just be better in every regard from what i've seen and heard in videos and on paper etc.. They have square frame to get a better seal on rads for more static pressure than SP120s, they have higher airflow from the new blade design, they are said to be quieter at equivalent rpm with the new magnetic levitation bearings etc..etc.. so should be great radiator fans.


Unfortunately, not hopefully on the weekend.
There is almost no vibration transmitted to the frame and the fan produces a lower tone than the SP’s. Also noticed that the SP fans sometime make a ticking kind of noise, hard to explain what I mean. These do not make any.
I suspect these are going to perform well in all aspects.
post #73 of 242
Thread Starter 
Quote:
Originally Posted by xTesla1856 View Post

Subbed, eager to see this build finished biggrin.gif

welcome aboard thumb.gif
post #74 of 242
Thread Starter 
Case is on its way and will be here Monday thumb.gif
post #75 of 242
Quote:
Originally Posted by paultoke View Post

Case is on its way and will be here Monday thumb.gif

Good stuff, look forward to the unveiling. thumb.gif
post #76 of 242
Thread Starter 
Just went and picked up my case.
Looks like its time to get this build moving again thumb.gif

post #77 of 242
Quote:
Originally Posted by paultoke View Post

Just went and picked up my case.
Looks like its time to get this build moving again thumb.gif


Glad you got your case wish mine would hurry along look forward to following the log.
post #78 of 242
Thread Starter 
As there very few build logs on the M1.0 case I thought I would photograph a step by step case assembly to help others.
This version has a 3 layer front not the standard 2.

Hope this helps.











post #79 of 242
Nice case I think the reason for the lack of M1.0 build logs is because most either go with a S2.5 and micro atx build or a L1.0 build instead for the additional radiator capacity.

Good luck with build hope everything comes together for you now.
post #80 of 242
Thread Starter 
There's a few out there not just on this site but not in detail more of a finished product.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Case Mod Work Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Case Mod Work Logs › (Build log) Parvum Project rVe10