Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › [Build Log] Red IT I7-6700K, Gigabyte G1 GTX 1080 SLI, Enthoo Primo, Watercooling
New Posts  All Forums:Forum Nav:

[Build Log] Red IT I7-6700K, Gigabyte G1 GTX 1080 SLI, Enthoo Primo, Watercooling

post #1 of 5
Thread Starter 
Hello guys,

This is the very first time I will be doing a build log.
Well this build log is actually a first of many things!
It's the first time I will be doing a dual loop, it's the first time I will use hard tubing and all of this while writing about it biggrin.gif

So hopefully I don't mess up too much and it ends up looking nice!

So parts :

Main Components:
Case: Phanteks Enthoo Primo
CPU: Intel I7 6700K
Motherboard: EVGA Z170 FTW
RAM: Corsair Vengeance 2x8GB 2400Mhz
GPU: Gigabyte GTX 1080 G1 Gaming x2in SLI
SSD: SAMSUNG 850 EVO 120GB X2 in RAID 1
SSD: SAMSUNG 850 EVO 500GB X2 in RAID 1
SSD: SAMSUNG 850 EVO M.2 256GB for OS
PSU: Corsair AX1200i
Fans: Corsair AP 120 Quiet Edition
OS: Windows 10 Home
Monitor: Asus PB287Q

Water Cooling:
CPU Water Block: XSPC Raystorm
GPU Water Block: EK-FC GTX 1080 G1 Plexi
Pump/Reservoir: D5 x2
Reservoir: Bitspower Z150
Reservoir: Koolance Reservoir
Radiator:: Alphacool ST45 480mm
Radiator:: Alphacool ST60 480mm
Radiator:: Alphacool ST45 240mm
EK Terminal: - EK-FC Terminal DUAL Serial Plexi
And lots of fittings!

I already have all the watercooling parts, only missing a SLI bridge pretty much.

Waterblocks for the GPU arrived today, so I already installed 1

Images coming later
Installing the GPU block (yes I know there's still some heat paste around the GPU die but I had lot of trouble removing it and my q-tip started to unraffle mad.gif


My heat paste cross isn't the prettiest biggrin.gif

The plexi block is going to look good when filled, too bad it won't be visible redface.gif



Edited by DonManolo - 7/8/16 at 1:31pm
post #2 of 5
Glorious master race
I don't see the monitor in the list.
Also, why dual loop?
Edited by Just a nickname - 6/30/16 at 8:28am
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7-4790k MSI Z97 Gaming 5 Sapphire R9 290X Tri-X 2x8gb ADATA 2133MHz CL10 
Hard DriveCoolingOSKeyboard
Mushkin 1 TB SSD & Samsung F3 spinpoint 1 TB MCP655A + 2 x MCP320 + EK supreme copper Win10 Corsair K70 Lux 
PowerCaseMouse
Corsair 750W Bitphenix Monstrous water cooling case Logitech G9X 
  hide details  
Reply
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7-4790k MSI Z97 Gaming 5 Sapphire R9 290X Tri-X 2x8gb ADATA 2133MHz CL10 
Hard DriveCoolingOSKeyboard
Mushkin 1 TB SSD & Samsung F3 spinpoint 1 TB MCP655A + 2 x MCP320 + EK supreme copper Win10 Corsair K70 Lux 
PowerCaseMouse
Corsair 750W Bitphenix Monstrous water cooling case Logitech G9X 
  hide details  
Reply
post #3 of 5
Thread Starter 
I added the monitor to the list.
And dual loop just for fun.
post #4 of 5
That is an ungodly amount of paste on the GPU
post #5 of 5
Thread Starter 
Yea more came out of the syringe than what I intended to use. mad.gif
You should've seen how much was on it when I removed the stock cooler, they sure don't save on the paste @ Gigabyte biggrin.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Build Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › [Build Log] Red IT I7-6700K, Gigabyte G1 GTX 1080 SLI, Enthoo Primo, Watercooling