Overclock.net › Forums › Graphics Cards › AMD/ATI › Polaris Bios Editing ( RX5xx / RX4xx )
New Posts  All Forums:Forum Nav:

Polaris Bios Editing ( RX5xx / RX4xx ) - Page 256

post #2551 of 3354
So I fixed the memory issue... Just needed to add some voltage to the CPU NB... Integrated memory controller for 32GB stability. This is 580 Bios on 480 stock settings. I'll compare and see if 580 bios performs differently regardless of clocks.

post #2552 of 3354
Okay AMD, I just give up.

I've been fiddling around with editing my card's BIOS since I bought it.

I spent hours and hours in fine tuning my bios and testing, testing and testing.

The result is that I just lost time. We all know the problems with the stock settings, the two memory states, the ram that bugs with 2 monitors, we have to patch the drivers because they're stupid AND NOW I'm locked with a voltage of 1150mv, no matter what. I was using 1300mhz@1075mv.

WHATEVER, amd. Okay.


It was perfect, I was using the uber timings and 2100mhz for the memory and the results were pretty good, I was satisfied. But it was only for the benchmarks, I guess. Testing, testing and testing, the card was perfect, no memory errors etc.

Long story short : I only used benchmarks on my card in the last weeks because I have no time to play. I didn't actually play games, I only run Dark Souls 3 every once in a while.

I've been struggling to get 60fps in this game, but I was pretty sure it was game's fault, as lowering details and resolution would always get me 50-55fps. I was, okay, it's probably game's fault. Well, guess what, it's not. With stock bios runs PERFECTLY.

The frame rate drop was caused by a game's memory leak. In fact, I couldn't play it without using the page file as a virtual ram, because the game wouldn't start with "just" 8gbs of ram. AND I THOUGHT IT WAS A BUG OF THE GAME. It makes sense that I lose fps because the page file is way slower than the RAM.

I just couldn't find any info about this problem anywhere.

So I spent more than 60 hours playing @ 50-55fps accross the months with that utterly disturbing micro-stuttering with more than capable hardware for the game.

So, this was the last drop, AMD. You won, I'm going back to stock bios. That's what you wanted us to do since you added the signature check.

I'll just give it the last chance when I'll find a suitable RX580 4gb bios so that I should work like a "stock" bios.
post #2553 of 3354
Quote:
Originally Posted by generaleramon View Post


MOD.rom is the bios i'm using on my Reference XFX RX480 8GB
-Low Voltages / 1137mv@1350Mhz
-High DPMs tuned for max performance in case of throttling
-Max fan speed is 3200rpm
-Mem Clock is 2100Mhz
-UberMix v2.3 Timings
-TDP is 165-170W
-1.200v Wattman Limit
-85°C Max Temp / 75°C Target Temp

@Y0shi

Wanted to personally thank you @generaleramon as I flashed the MOD.rom file with my own Reference XFX RX480 8GB (maybe we have the same card, I've got the RX-480M8BFA6 1288MHz edition.)

It's running extremely well, no errors so far and going from stock speeds to the 580 + tighter memory timings is great so far.

Cooling is working well. It was already modded with an Accelero Mono Plus. In Valley 4.0 it's running the card at 70-71 degrees steady (picture from Watttool, 10 minutes running Heaven). Also a GPGPU run for the sake of it:




Will keep an eye on it for a couple of days (test a few games as well) but otherwise a successful RX480 > RX580 conversion here.
post #2554 of 3354
Hi, everybody.
Is anyone have BIOS from Sapphire RX 580 Pulse 8G with Micron memory?
post #2555 of 3354
Thread Starter 
Quote:
Originally Posted by daevy3k View Post

Okay AMD, I just give up.

I've been fiddling around with editing my card's BIOS since I bought it.

I spent hours and hours in fine tuning my bios and testing, testing and testing.

The result is that I just lost time. We all know the problems with the stock settings, the two memory states, the ram that bugs with 2 monitors, we have to patch the drivers because they're stupid AND NOW I'm locked with a voltage of 1150mv, no matter what. I was using 1300mhz@1075mv.

WHATEVER, amd. Okay.


It was perfect, I was using the uber timings and 2100mhz for the memory and the results were pretty good, I was satisfied. But it was only for the benchmarks, I guess. Testing, testing and testing, the card was perfect, no memory errors etc.

Long story short : I only used benchmarks on my card in the last weeks because I have no time to play. I didn't actually play games, I only run Dark Souls 3 every once in a while.

I've been struggling to get 60fps in this game, but I was pretty sure it was game's fault, as lowering details and resolution would always get me 50-55fps. I was, okay, it's probably game's fault. Well, guess what, it's not. With stock bios runs PERFECTLY.

The frame rate drop was caused by a game's memory leak. In fact, I couldn't play it without using the page file as a virtual ram, because the game wouldn't start with "just" 8gbs of ram. AND I THOUGHT IT WAS A BUG OF THE GAME. It makes sense that I lose fps because the page file is way slower than the RAM.

I just couldn't find any info about this problem anywhere.

So I spent more than 60 hours playing @ 50-55fps accross the months with that utterly disturbing micro-stuttering with more than capable hardware for the game.

So, this was the last drop, AMD. You won, I'm going back to stock bios. That's what you wanted us to do since you added the signature check.

I'll just give it the last chance when I'll find a suitable RX580 4gb bios so that I should work like a "stock" bios.

set the idle voltage to stock. See if it solve the problem of the locked voltage wink.gif
post #2556 of 3354
Thread Starter 
@OhGodAGirl thumb.gif

OhGodADecode v1.01 Stock 2000Mhz Timings

./ohgodadecode 777000000000000022CC1C0031F67E57F05711183FCFB60D006C070124081420FA8900A0030000001E123A46DB354019

TRCDW=17 TRCDWA=17 TRCDR=29 TRCDRA=29 TRRD=7 TRC=87 Pad0=0

TNOPW=0 TNOPR=0 TR2W=31 TCCDL=3 TR2R=5 TW2R=17 Pad0=0 TCL=24 Pad1=0

TRP_WRA=63 TRP_RDA=30 TRP=27 TRFC=219 Pad0=0

PA2RDATA=0 Pad0=0 PA2WDATA=0 Pad1=0 TFAW=12 TCRCRL=3 TCRCWL=7 TFAW32=8

MC_SEQ_MISC1: 0x20140824
MC_SEQ_MISC3: 0xA00089FA
MC_SEQ_MISC8: 0x00000003

ACTRD=30 ACTWR=18 RASMACTRD=58 RASMACTWR=70

RAS2RAS=219 RP=53 WRPLUSRP=64 BUS_TURN=25


OhGodADecode v1.01 Uber-Mix v2.3

./ohgodadecode 777000000000000022CC1C00AD615B41C0570E152DCB7409006007000B031420FA8900A00300000010123A46DB354019

TRCDW=13 TRCDWA=13 TRCDR=24 TRCDRA=22 TRRD=5 TRC=65 Pad0=0

TNOPW=0 TNOPR=0 TR2W=28 TCCDL=3 TR2R=5 TW2R=14 Pad0=0 TCL=21 Pad1=0

TRP_WRA=45 TRP_RDA=22 TRP=19 TRFC=151 Pad0=0

PA2RDATA=0 Pad0=0 PA2WDATA=0 Pad1=0 TFAW=0 TCRCRL=3 TCRCWL=7 TFAW32=0

MC_SEQ_MISC1: 0x2014030B
MC_SEQ_MISC3: 0xA00089FA
MC_SEQ_MISC8: 0x00000003

ACTRD=16 ACTWR=18 RASMACTRD=58 RASMACTWR=70

RAS2RAS=219 RP=53 WRPLUSRP=64 BUS_TURN=25
Edited by generaleramon - 4/25/17 at 2:13am
post #2557 of 3354
post #2558 of 3354
Thread Starter 
i post the terminal output of "OhGodATool v1.2.1".

OhGodATool v1.2.1
Usage: ./ohgodatool [-i GPUIdx | -f VBIOSFile] [Generic Options] [State modification options]
Generic modification options:
--set-fanspeed
--set-tdp
--set-tdc
--set-max-power
--set-max-core-clock
--set-max-mem-clock
State selection options (must be used before state modification options; -1 indicates last existing state):
--core-state
--mem-state
--volt-state
State modification options:
--mem-clock
--core-clock
--mem-vddc-idx
--core-vddc-idx
--mvdd
--vddci
--core-vddc-off
--vddc-gfx-off
--vddc-table-set
Display options (shows the selected states, or if none selected, all states):
--show-mem
--show-core
--show-voltage
--show-fanspeed
--show-temp
post #2559 of 3354
post #2560 of 3354
Thread Starter 
Quote:
Originally Posted by xxanderx View Post

Hi, everybody.
Is anyone have BIOS from Sapphire RX 580 Pulse 8G with Micron memory?

post you original 480 bios. i will put the Micron timings in the Sapphire RX 580 Pulse bios wink.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD/ATI
Overclock.net › Forums › Graphics Cards › AMD/ATI › Polaris Bios Editing ( RX5xx / RX4xx )