Overclock.net banner

Thermaltake Core P3 Owner's Club

627K views 1K replies 274 participants last post by  Ociya Syndor 
#1 ·
Welcome to the Thermaltake Core P3 Owner's Club!




Official Websites:

Core P3 Black - http://www.thermaltakeusa.com/Chassis/Mid_Tower_/Core/C_00002908/Core_P3/design.htm
Core P3 Snow - http://www.thermaltakeusa.com/Chassis/Mid_Tower_/Core/C_00002914/Core_P3_Snow_Edition/design.htm

Buy Now:
Core P3 Black - http://www.newegg.com/Product/Product.aspx?Item=N82E16811133313&Tpk=N82E16811133313
Core P3 Snow - Coming Soon!

Take presentation to the next level with the Core P3 Open Frame chassis by Thermaltake. The fully modular design of the Core P3 allows flexibility for 3-way placement layouts (Wall mount, Horizontal and Vertical), dual GPU layout locations: Horizontal and Vertical and placement locations for Native AIO support and liquid cooling systems. Uncover greatness with the Core P3's panoramic viewing angle with its large acrylic window to protect and present. Seeing is believing, the Core P3 brings the ultimate in PC hardware viewing wherever you mount or display.



 
See less See more
7
#4 ·
Do we have more detailed measurements? How wide are the threads for the acrylic standoff? How hard would it be to get a 4 expansion slot platform? I'd like to get this thing under 10" thick. Also, did they ever make a glass replacement panel for the P5? Any chance we will see one here?
 
#6 ·
  • Rep+
Reactions: Unnatural
#7 ·
Quote:
Originally Posted by JasonTV View Post

Do we have more detailed measurements? How wide are the threads for the acrylic standoff? How hard would it be to get a 4 expansion slot platform? I'd like to get this thing under 10" thick. Also, did they ever make a glass replacement panel for the P5? Any chance we will see one here?
I dont have the exact info, but I will check.
You can always buy the case and find out
tongue.gif


We have looked into glass panels, but there is some concerns with how the holes in each corner are close to the edge.

The feedback we have seen from glass panel where the glass is exploding in other case designs is a big concern of mine personally.
I play with cars a lot and had checked with my glass buddy a while back.
Just be careful if you get one and it is not safety glass.
 
#8 ·
Any chance this can take an eATX board like the Rampage IV Black Edition? I know what the specs say, but was wondering if there was any wiggle room.
 
#9 ·
 
#10 ·


time to build
 
#11 ·






 
#12 ·




Future Mods:

EK Predator 360
EK Asus Sabertooth Z170 CPU block
Asus 1070 *when the price stabilizes*
Samsung SM961 M.2 256GB
Camo matching cable sleeving
 
#14 ·
Hi, I was interested in this case, after upgrading GPU to Palit 1070 Gamerock which have massive size cooler. Current Air 240 wont fit ( so temporary switched back to older full tower case ).

So my question are, will it fit my 1070 card ( L = 285mm / 11.22" ) with radiator ( 60mm thick with fans ) and reservoir installed.
Just need to be sure, as my country doesnt have this not-satisfy-then-return policy.

This is Asus Strix with 305mm / 12" length, and it looks like will touch reservoir if installed. Maybe with slightly shorter card, it will fit ?
 
#15 ·
Quote:
Originally Posted by someonesim View Post

Hi, I was interested in this case, after upgrading GPU to Palit 1070 Gamerock which have massive size cooler. Current Air 240 wont fit ( so temporary switched back to older full tower case ).

So my question are, will it fit my 1070 card ( L = 285mm / 11.22" ) with radiator ( 60mm thick with fans ) and reservoir installed.
Just need to be sure, as my country doesnt have this not-satisfy-then-return policy.

This is Asus Strix with 305mm / 12" length, and it looks like will touch reservoir if installed. Maybe with slightly shorter card, it will fit ?
Taken from the owners manual:

CPU cooler height limitation: 180mm
VGA length limitation:
280mm (with Reservoir)
450mm (without Reservoir)

PSU length limitation: 200mm
 
#16 ·
I'm thinking of getting this, but wanted to mount it hanging above my desk, instead of on the wall, if possible. Since it has a VESA mount, it can take a monitor arm, but with PSU+MB+WC+2X 1070's +RAM, it'll weigh around 40lbs...but most monitor arms only support up to 33...anyone know of a desk arm for monitors that can support 40+?
 
#17 ·
Can anyone tell me if this will take an eATX board with the GPU being in the normal MB position? Meaning the GPU is setup just like a normal case? It looks like it will do it if you only have one GPU, which I do, but I wanted to make sure.

Thanks
 
#18 ·
Quote:
Originally Posted by someonesim View Post

Hi, I was interested in this case, after upgrading GPU to Palit 1070 Gamerock which have massive size cooler. Current Air 240 wont fit ( so temporary switched back to older full tower case ).

So my question are, will it fit my 1070 card ( L = 285mm / 11.22" ) with radiator ( 60mm thick with fans ) and reservoir installed.
Just need to be sure, as my country doesnt have this not-satisfy-then-return policy.

This is Asus Strix with 305mm / 12" length, and it looks like will touch reservoir if installed. Maybe with slightly shorter card, it will fit ?
offtopic, but does anyone know what ram they're using in that photo? picture isn't large enough to zoom in.
 
#19 ·
Quote:
Originally Posted by yukkerz View Post

Taken from the owners manual:

CPU cooler height limitation: 180mm
VGA length limitation:
280mm (with Reservoir)
450mm (without Reservoir)

PSU length limitation: 200mm
That's why I wonder, as in their promo image, there's one water cooled build with GPU longer than official figure.

I'm getting it tomorrow hopefully, and just improvise if reservoir blocking.
 
#22 ·


Well these goodies came
 
#24 ·
Quote:
Originally Posted by Duality92 View Post

I will have a white P3 coming soon
smile.gif
Son of a.....


Well a few cans of spray paint and I'll have a white case also
 
#26 ·




Just gotta do some cable management
 
Top