Overclock.net › Forums › Components › Mice › Nixeus REVEL [It's here!]
New Posts  All Forums:Forum Nav:

Nixeus REVEL [It's here!] - Page 21

post #201 of 2364
Quote:
Originally Posted by jsx3 View Post

"Designed in the USA"

Alright... lol

I got my MassDrop notice in shipping so maybe in another two weeks it will arrive at my front door here wubsmiley.gif .

Wished they actually made this Mouse in the USA.

For now I shall enjoy this mouse when it arrives as well as the new Dream Machines DM1 Pro S model. This looks like a shoot out in the OK corral sniper.gif .
post #202 of 2364
Got everything hooked up and tested the latency vs the G303. Tested both right and left clicks and G303 wins by 1.9ms (sometimes more) on both. The sensor seems good and did not notice any issues with tracking. When I shake the mouse I can hear something inside rattling and it sounds like it is near the sensor or lens. Not sure if it specific to my mouse or not but the mouse does not glide very well and feels like it drags a bit (towards back of mouse). Not sure if that is due to how they cut the feet or something else. I may order some hyperglides to see if it improves the glide and fixes the drag. Overall I have not yet noticed any other issues.

Going to use it more and see if it will be my go to mouse from now on. Been using the FK2 which I recently got and freaking love the shape but dont care for the extra buttons that I may remove and make a block off plate or something.
post #203 of 2364
Quote:
Originally Posted by Elrick View Post

I got my MassDrop notice in shipping so maybe in another two weeks it will arrive at my front door here wubsmiley.gif .

Wished they actually made this Mouse in the USA.

For now I shall enjoy this mouse when it arrives as well as the new Dream Machines DM1 Pro S model. This looks like a shoot out in the OK corral sniper.gif .

I'm actually researching on sources to get some of our products made in the USA as a side project. Kind of hard because some of the core components and IP are owned/made not made in the USA. By law even if we can get 50% of the end product made in the USA, we can't use the "Made in USA" label. It requires at least 90%.
 
My Girlfriend #3
(15 items)
 
 
CPUMotherboardGraphicsRAM
AMD FX-8350 4.0GHz 8-Core Processor Gigabyte 970A-UD3H XFX AMD Radeon RX 480 8GB OC Black Edition GSkill Sniper 8GB DDR3 
Hard DriveHard DriveCoolingOS
Crucial MX100 128GB SSD Toshiba 2TB 7200RPM HDD NZXT Kraken X41 Water Cooler Windows 8.1 Pro 
MonitorKeyboardPowerCase
NX-VUE24 Freesync 144Hz Gaming Monitor Nixeus MODA v2 Mechanical Keyboard - Brown Swit... Enermax Triathlor 550W Modular PSU NZXT S340 
MouseMouse PadAudioAudio
Nixeus REVEL PMW3360 Gaming Mouse ROCCAT SENSE Nixeus ARC 4.0 Bluetoth Speakers (Prototype) Nixeus Rival Headphones (Prototype) 
CPUMotherboardGraphicsRAM
Intel i5-3570K Gigabyte H77N-Wifi Mini-iTX Gigabyte Windforce Nvidia GTX 670  Corsair Vengeance 8GB DDR3 1600 
Hard DriveHard DriveCoolingOS
Samsung 830 SSD 128GB Seagate Barracuda 1TB 7200RPM NZXT Kraken X31 Water Cooler Windows 8.1 
MonitorKeyboardPowerCase
Nixeus Vue 27" IPS LED 2560x1440 DisplayPort MA... Nixeus MODA Mechanical Keyboard - Brown Switch ... Enermax Triathlor 550W Modular PSU Cool Master Elite 130 Mini-iTX Case 
MouseMouse PadAudio
SteelSeries DOTA 2 Rival Mouse SteelSeries QcK Nixeus Earphones ER-BKSL14 
CPUMotherboardGraphicsRAM
AMD Phenom II X4 965 Processor Black Edition MSI 870A-G54 XFX AMD Radeon 7850 1GB Corsair XMS DDR3 8GB 
Hard DriveOptical DriveCoolingOS
Seagate Barracuda 2TB 7200RPM LG CD/DVD Combo Drive Antech H20 950 Khuler Windows 7 Ultimate 
MonitorKeyboardPowerCase
Nixeus Vue 27" H-IPS 2560x1440 WQHD Monitor NX... Nixeus MODA Mechanical Keyboard - Brown Switch ... OCZ Fatal1ty Modular 550 Watt Modular PSU Roswill Challenger-U3 Mid-Tower ATX Case 
Mouse
Gigabyte M6800 
  hide details  
Reply
 
My Girlfriend #3
(15 items)
 
 
CPUMotherboardGraphicsRAM
AMD FX-8350 4.0GHz 8-Core Processor Gigabyte 970A-UD3H XFX AMD Radeon RX 480 8GB OC Black Edition GSkill Sniper 8GB DDR3 
Hard DriveHard DriveCoolingOS
Crucial MX100 128GB SSD Toshiba 2TB 7200RPM HDD NZXT Kraken X41 Water Cooler Windows 8.1 Pro 
MonitorKeyboardPowerCase
NX-VUE24 Freesync 144Hz Gaming Monitor Nixeus MODA v2 Mechanical Keyboard - Brown Swit... Enermax Triathlor 550W Modular PSU NZXT S340 
MouseMouse PadAudioAudio
Nixeus REVEL PMW3360 Gaming Mouse ROCCAT SENSE Nixeus ARC 4.0 Bluetoth Speakers (Prototype) Nixeus Rival Headphones (Prototype) 
CPUMotherboardGraphicsRAM
Intel i5-3570K Gigabyte H77N-Wifi Mini-iTX Gigabyte Windforce Nvidia GTX 670  Corsair Vengeance 8GB DDR3 1600 
Hard DriveHard DriveCoolingOS
Samsung 830 SSD 128GB Seagate Barracuda 1TB 7200RPM NZXT Kraken X31 Water Cooler Windows 8.1 
MonitorKeyboardPowerCase
Nixeus Vue 27" IPS LED 2560x1440 DisplayPort MA... Nixeus MODA Mechanical Keyboard - Brown Switch ... Enermax Triathlor 550W Modular PSU Cool Master Elite 130 Mini-iTX Case 
MouseMouse PadAudio
SteelSeries DOTA 2 Rival Mouse SteelSeries QcK Nixeus Earphones ER-BKSL14 
CPUMotherboardGraphicsRAM
AMD Phenom II X4 965 Processor Black Edition MSI 870A-G54 XFX AMD Radeon 7850 1GB Corsair XMS DDR3 8GB 
Hard DriveOptical DriveCoolingOS
Seagate Barracuda 2TB 7200RPM LG CD/DVD Combo Drive Antech H20 950 Khuler Windows 7 Ultimate 
MonitorKeyboardPowerCase
Nixeus Vue 27" H-IPS 2560x1440 WQHD Monitor NX... Nixeus MODA Mechanical Keyboard - Brown Switch ... OCZ Fatal1ty Modular 550 Watt Modular PSU Roswill Challenger-U3 Mid-Tower ATX Case 
Mouse
Gigabyte M6800 
  hide details  
Reply
post #204 of 2364
Omg, the mouse looks awesome! Can't wait for mine, but sadly I live in Singapore. So it will take some time before I get mine.
post #205 of 2364






No cable drag to speak of and the cable is pretty close to a zowie cable.
Edited by Evovil - 8/3/16 at 7:30pm
post #206 of 2364
Quote:
Originally Posted by Evovil View Post


No cable drag to speak of and the cable is pretty close to a zowie cable.

The side buttons are a little farther back than the Sensei and DM1 Pro. Do they get in the way of where you position your thumb?
Edited by dakuzo - 8/3/16 at 8:36pm
post #207 of 2364
Quote:
Originally Posted by Evovil View Post

Got everything hooked up and tested the latency vs the G303. Tested both right and left clicks and G303 wins by 1.9ms (sometimes more) on both. The sensor seems good and did not notice any issues with tracking. When I shake the mouse I can hear something inside rattling and it sounds like it is near the sensor or lens. Not sure if it specific to my mouse or not but the mouse does not glide very well and feels like it drags a bit (towards back of mouse). Not sure if that is due to how they cut the feet or something else. I may order some hyperglides to see if it improves the glide and fixes the drag. Overall I have not yet noticed any other issues.

Going to use it more and see if it will be my go to mouse from now on. Been using the FK2 which I recently got and freaking love the shape but dont care for the extra buttons that I may remove and make a block off plate or something.

The point of contact between mouse and surface is (obviously) the feet barring something else obvious sticking out. If you're noticing dragging it'd more or less have to be the feet. Don't suppose it ships with replacement feet?

I think they use default Sensei feet so replacing them should be pretty easy. Hyperglides, as you said, or something along those lines. Edit: looking more closely, maybe not Sensei feet, the bottom feet look shorter.

Though if the feet are cut poorly or dragging out of box that's perhaps not the greatest sign of quality control and I'd be a little disappointed.
Edited by mikesn - 8/3/16 at 9:07pm
post #208 of 2364
I like the thumb buttons on the revel more then the DM but it might be a little too far back?
post #209 of 2364
Quote:
Originally Posted by dakuzo View Post

The side buttons are a little farther back than the Sensei and DM1 Pro. Do they get in the way of where you position your thumb?

I'm a finger tip grip so no. They are actually placed really nicely for me.
post #210 of 2364
Quote:
Originally Posted by mikesn View Post


I think they use default Sensei feet so replacing them should be pretty easy. Hyperglides, as you said, or something along those lines. Edit: looking more closely, maybe not Sensei feet, the bottom feet look shorter.

We can ask the rep in this thread
Quote:
Originally Posted by Peter Nixeus View Post

I'm actually researching on sources to get some of our products made in the USA as a side project. Kind of hard because some of the core components and IP are owned/made not made in the USA. By law even if we can get 50% of the end product made in the USA, we can't use the "Made in USA" label. It requires at least 90%.

are the feet the same as the Sensei's?
Ice Wings
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570K @ 4.5GHz Asus Sabertooth Z77 Asus Nvidia Geforce GTX 980 Samsung Green MV-3V4G3D/US 8GB 2x4GB DDR3 1600MHZ 
Hard DriveHard DriveCoolingOS
OCZ Agility 3 240GB  Samsung F4 HD204UI Noctua NH-D14 Windows 10 Pro 64 bit 
MonitorKeyboardPowerCase
Asus RoG Swift PG278Q Ducky One (DKON1687) MX Reds w/ PBT keycaps. SeaSonic X Series X650 Gold Fractal Design Define R4 
MouseMouse Pad
Logitech G303 Puretrak Talent  
  hide details  
Reply
Ice Wings
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570K @ 4.5GHz Asus Sabertooth Z77 Asus Nvidia Geforce GTX 980 Samsung Green MV-3V4G3D/US 8GB 2x4GB DDR3 1600MHZ 
Hard DriveHard DriveCoolingOS
OCZ Agility 3 240GB  Samsung F4 HD204UI Noctua NH-D14 Windows 10 Pro 64 bit 
MonitorKeyboardPowerCase
Asus RoG Swift PG278Q Ducky One (DKON1687) MX Reds w/ PBT keycaps. SeaSonic X Series X650 Gold Fractal Design Define R4 
MouseMouse Pad
Logitech G303 Puretrak Talent  
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Mice
Overclock.net › Forums › Components › Mice › Nixeus REVEL [It's here!]