Overclock.net › Forums › Cooling › Air Cooling › PH-F120MP case/heatsink fan?
New Posts  All Forums:Forum Nav:

PH-F120MP case/heatsink fan?

post #1 of 4
Thread Starter 
Can the PH-F120MP be used as case fans since it is listed as high static pressure which is more suited to heatsink?

Also, is it possible to remove the pre-installed rubber pads in each corner as it won't fit on the Noctua heatsink with them on.

Many thanks!
post #2 of 4
It will work, and yes the rubber mounts come off, but I would suggest using PH-F120XP.
The PH-F120XP has higher airflow and same pressure as PH-F120MP.
post #3 of 4
Thread Starter 
Quote:
Originally Posted by doyll View Post

It will work, and yes the rubber mounts come off, but I would suggest using PH-F120XP.
The PH-F120XP has higher airflow and same pressure as PH-F120MP.
Just checked and I don't think the Phantek fan will fit on the Noctua D14 cooler as the black rubber on each corner of the heatsink for the fan clips won't fit the Phantenk as the holes are hollow.

post #4 of 4
Quote:
Originally Posted by Lither View Post

Just checked and I don't think the Phantek fan will fit on the Noctua D14 cooler as the black rubber on each corner of the heatsink for the fan clips won't fit the Phantenk as the holes are hollow.
Warning: Spoiler! (Click to show)
Okay. so why are you changing the D14 fans? They are quite good as is.
If it's for color, why not use 140mm fans like PH-F140HP_II, TY-147A or similar? Both are very good. I used TY-147 on my last twin tower and TY-143 on red P-TC14PE.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Air Cooling
Overclock.net › Forums › Cooling › Air Cooling › PH-F120MP case/heatsink fan?