Overclock.net › Forums › Graphics Cards › NVIDIA › [Official] NVIDIA Titan X Pascal Owners Thread
New Posts  All Forums:Forum Nav:

[Official] NVIDIA Titan X Pascal Owners Thread - Page 235

post #2341 of 7575
I added the info necessary to control voltage in AB but it doesn't appear to add any extra voltage, I also tried the CTRL L to lock boost clocks, seems to work on one card but in SLI it still only works on one card

The mod didn't help me much (about 50mhz higher) and on one card it made things worse, GPU-Z would show max TDP of like 24% and card would not clock worth a crap, hope you have better luck than I did
post #2342 of 7575
Quote:
Originally Posted by toncij View Post

30% compared to a single flex? I've tried dual flex and it's the same as HB one - sans incompatibility with EKWB blocks. tongue.gif

In a lot of things there is no difference between a HB and Flexi bridge.

Witcher 3 and a few others seem to be the exception rather than the rule.

If you do want to use a HB bridge with waterblocks EVGA also sell them and they don't need cutting down.
post #2343 of 7575
Quote:
Originally Posted by Kaapstad View Post

In a lot of things there is no difference between a HB and Flexi bridge.

Witcher 3 and a few others seem to be the exception rather than the rule.

If you do want to use a HB bridge with waterblocks EVGA also sell them and they don't need cutting down.

Dual flexi at 5K - I saw no difference out of the 3% margin of error aka different test instance. Single flexi is the other thing, but after trying both HB and 2xFlexi, I think connections are the same thickness so there is same perf.
post #2344 of 7575
Quote:
Originally Posted by Menthol View Post

I added the info necessary to control voltage in AB but it doesn't appear to add any extra voltage, I also tried the CTRL L to lock boost clocks, seems to work on one card but in SLI it still only works on one card

The mod didn't help me much (about 50mhz higher) and on one card it made things worse, GPU-Z would show max TDP of like 24% and card would not clock worth a crap, hope you have better luck than I did

Have you tried doing one at a time? I heard if you lower the power sense to low it will lock the card in 2d clock's or something like that.
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
post #2345 of 7575
So mine just came in. Do I install it now or wait for my block to come in devil.gif

Ryzen
(15 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 7 1800x Asus Crosshair VI Hero Nvidia Titan X Pascal G.Skill Trident Z F4-3600C15D-16GTZ 
Hard DriveCoolingCoolingCooling
Samsung 850 Evo EK-Supremacy EVO EK-FC Titan X Pascal w/ Backplate EK-CoolStream PE 360 
CoolingCoolingOSMonitor
EK-CoolStream PE 240 EK-XRES 100 Revo D5 PWM Windows 10 Pro Acer Predator XB271HU 
PowerCaseAudio
EVGA Supernova 750 G2 Fractal-Design Define S Sound Blaster Z 
  hide details  
Reply
Ryzen
(15 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 7 1800x Asus Crosshair VI Hero Nvidia Titan X Pascal G.Skill Trident Z F4-3600C15D-16GTZ 
Hard DriveCoolingCoolingCooling
Samsung 850 Evo EK-Supremacy EVO EK-FC Titan X Pascal w/ Backplate EK-CoolStream PE 360 
CoolingCoolingOSMonitor
EK-CoolStream PE 240 EK-XRES 100 Revo D5 PWM Windows 10 Pro Acer Predator XB271HU 
PowerCaseAudio
EVGA Supernova 750 G2 Fractal-Design Define S Sound Blaster Z 
  hide details  
Reply
post #2346 of 7575
Quote:
Originally Posted by GlowingBurrito View Post

So mine just came in. Do I install it now or wait for my block to come in devil.gif


Is that even a question smile.gif No but seriously you can always stress test and bench it to see if it is all good before you get the block thumb.gif
post #2347 of 7575
Quote:
Originally Posted by DNMock View Post

So has a general consensus been reached on the resistor mod? Thin layer on 2 or thin layer on all 3? Gonna give it a go this weekend.

I did all three, under a furmark test where I was hitting 115-120% before, I'm now around 80-84%. Even setting the power limit to 120% now, the card seems to stop feeding more power at 400W. The power limit will show going up to 120%, but everything from 105% to 120% is pulling 400W from my rough math.
X9969X
(7 items)
 
  
CPUMotherboardGraphicsRAM
6950X @ 4.5GHz (Silicon Lottery 4.4 delid) Asus Rampage V Extreme  Nvidia Titan X Pascal Corsair Dominator Platinum 16GB DDR4 @ 3200MHz 
Hard DrivePowerCase
Intel 750 1.2TB SSD Corsair AX1200i Corsair Obsidian Series 900D 
  hide details  
Reply
X9969X
(7 items)
 
  
CPUMotherboardGraphicsRAM
6950X @ 4.5GHz (Silicon Lottery 4.4 delid) Asus Rampage V Extreme  Nvidia Titan X Pascal Corsair Dominator Platinum 16GB DDR4 @ 3200MHz 
Hard DrivePowerCase
Intel 750 1.2TB SSD Corsair AX1200i Corsair Obsidian Series 900D 
  hide details  
Reply
post #2348 of 7575
Quote:
Originally Posted by lilchronic View Post

Have you tried doing one at a time? I heard if you lower the power sense to low it will lock the card in 2d clock's or something like that.

I tried all 3 first, then removed CLU from the bottom res, then removed the middle, then removed the last, much harder to remove than to apply, that crap will end up all over the place if your not extremely careful
using universal blocks and a chiller for benching, they both hold 2100mhz, CLU on the one card gave me another 50mhz, would never do this for daily use
post #2349 of 7575
Quote:
Originally Posted by lilchronic View Post

Have you tried doing one at a time? I heard if you lower the power sense to low it will lock the card in 2d clock's or something like that.
^^ This is what was happening with the 1080. The CLU mod is very "iffy" IMO.
Quote:
Originally Posted by Yuhfhrh View Post

I did all three, under a furmark test where I was hitting 115-120% before, I'm now around 80-84%. Even setting the power limit to 120% now, the card seems to stop feeding more power at 400W. The power limit will show going up to 120%, but everything from 105% to 120% is pulling 400W from my rough math.
do you have a Killawatt meter?
Quote:
Originally Posted by Menthol View Post

I tried all 3 first, then removed CLU from the bottom res, then removed the middle, then removed the last, much harder to remove than to apply, that crap will end up all over the place if your not extremely careful
using universal blocks and a chiller for benching, they both hold 2100mhz, CLU on the one card gave me another 50mhz, would never do this for daily use
^^ for sure.
x99
(26 items)
 
z170/z270
(27 items)
 
x299
(10 items)
 
CPUCPUMotherboardGraphics
i7 5960X i7 6950X Asus Rampage V Extreme (STD and model-10) 2 GTX TitanXp 
GraphicsRAMHard DriveHard Drive
2 GTX Titan X Pascal GSkill 3200c14 TZs 8x8GB @ 3400c13 Intel 750 NVMe 400GB 2x Plextor SSD 256 Raid 0 (Win 7) 
Hard DriveOptical DriveCoolingCooling
Samsung NVMe 950 Pro M.2 Plextor 810 Aquacomputer GiGant 1680 (4x420) external Rad XSPC RX360 
CoolingCoolingCoolingOS
Koolance 380i Laing DDC-1T (2) Koolance EXC-800 Chiller Windows 10 x64  
OSOSMonitorMonitor
Windows 7 Pro Linux Mint ASUS Swift 1440P 144Hz Seiki 50" 4K monitor (720P-2160i) 240-30Hz 
KeyboardPowerCaseMouse
Das Keyboard Model S Pro Corsair AX1500i MicroCool Banchetto 101 Steelseries Rival 
AudioOther
Ultimate Ears TF10 Koolance Pump/Fan Controller 
CPUCPUCPUMotherboard
i5 6600K i7 7700K i3 7350 ASUS Max iX APEX, Asrock MOCF, M8Impact 
GraphicsGraphicsGraphicsRAM
ASUS GTX 1080 Turbo ASUS GTX 960 Mini EVGA GTX 550Ti G.Skill 3600c15 
RAMHard DriveHard DriveHard Drive
G.Skill 4266c19 Samsung SM951 WD VR 300 Intel 750 NVMe U.2 
Hard DriveHard DriveOptical DriveCooling
Mushkin 512 Intel 600 NVMe Raid0 Plextor DVD ROM Custom Water (Koolance 380i / XSPC 360v2) 
CoolingOSOSOS
Corsair H80iV2 (M8I) Windows 10 Pro Window 7 Linux Mint 
MonitorMonitorKeyboardPower
Seiki 4K AOC 1080P Ducky Cherry Black Silverstone 500W SFX form factor/ Seasonic 760W 
CaseMouseAudio
Bench Logitech G700s Ultimate Ears TF10s 
CPUMotherboardGraphicsRAM
7740X ASUS Rampage Apex Various G.Skill 3600c15 2x8GB kits 
Hard DriveCoolingOSKeyboard
Samsung 960 Pro, NVMe Custom Water Windows 10 Razor Black Widow 
PowerCase
Seasonic 1000 Platinum, Corsair 1500i none :-) 
  hide details  
Reply
x99
(26 items)
 
z170/z270
(27 items)
 
x299
(10 items)
 
CPUCPUMotherboardGraphics
i7 5960X i7 6950X Asus Rampage V Extreme (STD and model-10) 2 GTX TitanXp 
GraphicsRAMHard DriveHard Drive
2 GTX Titan X Pascal GSkill 3200c14 TZs 8x8GB @ 3400c13 Intel 750 NVMe 400GB 2x Plextor SSD 256 Raid 0 (Win 7) 
Hard DriveOptical DriveCoolingCooling
Samsung NVMe 950 Pro M.2 Plextor 810 Aquacomputer GiGant 1680 (4x420) external Rad XSPC RX360 
CoolingCoolingCoolingOS
Koolance 380i Laing DDC-1T (2) Koolance EXC-800 Chiller Windows 10 x64  
OSOSMonitorMonitor
Windows 7 Pro Linux Mint ASUS Swift 1440P 144Hz Seiki 50" 4K monitor (720P-2160i) 240-30Hz 
KeyboardPowerCaseMouse
Das Keyboard Model S Pro Corsair AX1500i MicroCool Banchetto 101 Steelseries Rival 
AudioOther
Ultimate Ears TF10 Koolance Pump/Fan Controller 
CPUCPUCPUMotherboard
i5 6600K i7 7700K i3 7350 ASUS Max iX APEX, Asrock MOCF, M8Impact 
GraphicsGraphicsGraphicsRAM
ASUS GTX 1080 Turbo ASUS GTX 960 Mini EVGA GTX 550Ti G.Skill 3600c15 
RAMHard DriveHard DriveHard Drive
G.Skill 4266c19 Samsung SM951 WD VR 300 Intel 750 NVMe U.2 
Hard DriveHard DriveOptical DriveCooling
Mushkin 512 Intel 600 NVMe Raid0 Plextor DVD ROM Custom Water (Koolance 380i / XSPC 360v2) 
CoolingOSOSOS
Corsair H80iV2 (M8I) Windows 10 Pro Window 7 Linux Mint 
MonitorMonitorKeyboardPower
Seiki 4K AOC 1080P Ducky Cherry Black Silverstone 500W SFX form factor/ Seasonic 760W 
CaseMouseAudio
Bench Logitech G700s Ultimate Ears TF10s 
CPUMotherboardGraphicsRAM
7740X ASUS Rampage Apex Various G.Skill 3600c15 2x8GB kits 
Hard DriveCoolingOSKeyboard
Samsung 960 Pro, NVMe Custom Water Windows 10 Razor Black Widow 
PowerCase
Seasonic 1000 Platinum, Corsair 1500i none :-) 
  hide details  
Reply
post #2350 of 7575
Quote:
Originally Posted by Yuhfhrh View Post

I did all three, under a furmark test where I was hitting 115-120% before, I'm now around 80-84%. Even setting the power limit to 120% now, the card seems to stop feeding more power at 400W. The power limit will show going up to 120%, but everything from 105% to 120% is pulling 400W from my rough math.

Isn't that about the cap on a 6 + 8 pin connector + PCIE?

What were you pulling at 120% prior to the mod?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA
Overclock.net › Forums › Graphics Cards › NVIDIA › [Official] NVIDIA Titan X Pascal Owners Thread