Overclock.net › Forums › Graphics Cards › NVIDIA › [Official] NVIDIA Titan X Pascal Owners Thread
New Posts  All Forums:Forum Nav:

[Official] NVIDIA Titan X Pascal Owners Thread - Page 367

post #3661 of 7589
Quote:
Originally Posted by cisco0623 View Post

I just started messing with my OC last night as I finally have it under water. I had +99 already set by accident and it was boosting to 1950???? Glad I caught this as I thought something was wrong. (I was thinking to myself I know I hate math but 1531 + 100 isn't 1950!)

I'm curious if it boosts higher than stock at stock now. I don't recall that when I had it on air, but now I'm going to try later and watch closely.

mine at stock at 100% power target boosts to 1886mhz while gaming.
The Beast
(14 items)
 
  
CPUMotherboardGraphicsRAM
3770k @ 5.0Ghz MAXIMUS V FORMULA GTX Titan X (Pascal) 16Gb Corsair Vengeance 2400Mhz DDR3 
Hard DriveHard DriveCoolingOS
Sandisk 120Gb X2 Raid 0 (System) Wester digital 2TB 7200rpm (Storage) Custom Watercooling Windows 10 
MonitorKeyboardPowerCase
Dell S2716DG 27" Corasir K70 Rgb Super Flower 1200W Platinum Corsair 900D 
MouseAudio
Corsair M65 Rgb Asus Xonar D2X 
  hide details  
Reply
The Beast
(14 items)
 
  
CPUMotherboardGraphicsRAM
3770k @ 5.0Ghz MAXIMUS V FORMULA GTX Titan X (Pascal) 16Gb Corsair Vengeance 2400Mhz DDR3 
Hard DriveHard DriveCoolingOS
Sandisk 120Gb X2 Raid 0 (System) Wester digital 2TB 7200rpm (Storage) Custom Watercooling Windows 10 
MonitorKeyboardPowerCase
Dell S2716DG 27" Corasir K70 Rgb Super Flower 1200W Platinum Corsair 900D 
MouseAudio
Corsair M65 Rgb Asus Xonar D2X 
  hide details  
Reply
post #3662 of 7589
Quote:
Originally Posted by HyperMatrix View Post

As far as I'm aware that law doesn't apply to the US and Canada. But that's besides the point. I'm still running everything at stock. No blocks. No clu mod. Just want to make sure I don't have a bum card before getting into that.

this is distressing. Hopefully the customer support rep was incorrect or trolling.
post #3663 of 7589
Quote:
Originally Posted by Gary2015 View Post

Changing the stock cooler voids the warranty .

are you serious?
紅魔館
(12 items)
 
秋山 澪
(11 items)
 
For Sale: Crucial 2x8GB DDR4 2400 / 1TB 2.5" HDD
$40 (USD) or best offer
CPUMotherboardGraphicsRAM
i7 5820K ASUS X99 Deluxe Zotac GTX 1080 AMP! Crucial Ballistix Sport 4x4G DDR4-2400 
Hard DriveHard DriveOptical DriveCooling
WD Black 4TB Samsung 850 EVO 1TB Dell CH30N BD-Read Noctua NH-D15 
CoolingOSPowerCase
Noctua NF-A14 PWM x6 Windows 10 Enterprise EVGA 750W G2 Phanteks Enthoo Luxe 
CPUMotherboardGraphicsGraphics
i7 7700K P870KM1 Nvidia GeForce GTX 1080 Nvidia GeForce GTX 1080 
RAMHard DriveHard DriveOS
Gskill 3000MHz 16GB F4-3000C16D-16GRS  Samsung 850 EVO 500GB Samsung 850 Pro 500GB Windows 10 Enterprise 
MonitorPowerCase
AUO B173QTN01.0 2560x1440p G-sync  Eurocom 780W Clevo P870KM1 
  hide details  
Reply
紅魔館
(12 items)
 
秋山 澪
(11 items)
 
For Sale: Crucial 2x8GB DDR4 2400 / 1TB 2.5" HDD
$40 (USD) or best offer
CPUMotherboardGraphicsRAM
i7 5820K ASUS X99 Deluxe Zotac GTX 1080 AMP! Crucial Ballistix Sport 4x4G DDR4-2400 
Hard DriveHard DriveOptical DriveCooling
WD Black 4TB Samsung 850 EVO 1TB Dell CH30N BD-Read Noctua NH-D15 
CoolingOSPowerCase
Noctua NF-A14 PWM x6 Windows 10 Enterprise EVGA 750W G2 Phanteks Enthoo Luxe 
CPUMotherboardGraphicsGraphics
i7 7700K P870KM1 Nvidia GeForce GTX 1080 Nvidia GeForce GTX 1080 
RAMHard DriveHard DriveOS
Gskill 3000MHz 16GB F4-3000C16D-16GRS  Samsung 850 EVO 500GB Samsung 850 Pro 500GB Windows 10 Enterprise 
MonitorPowerCase
AUO B173QTN01.0 2560x1440p G-sync  Eurocom 780W Clevo P870KM1 
  hide details  
Reply
post #3664 of 7589
Quote:
Originally Posted by TK421 View Post

are you serious?

There's no warranty seal so you can put the stock one right back on.
post #3665 of 7589
I was able to get my EK blocks and back plate on and things were going great. Using my +200 Core/+200 Memory I was hitting pretty constant 2000 on each card with a drop to 1974 every once in a while. Heat was fine with the top card about 3-4c higher than the lower card. Through several runs of 3dmark and Valley, the highest temp was 52c on the top card. I then ran some games and things were also staying pretty steady. I then played Crysis 3 at max settings/4k and for only about 15 minutes or so and my top GPU was hitting 68c!!! My bottom card was staying steady at 42-44c no higher.

I am not sure why it would shoot up that high. I have run water loops on my GPU's since the initial Titan and never hit temps higher that 58c during the summer, so this is freaking me out. The only think I can think of is that a air bubble happen to hit and get perhaps stuck there for a bit. I did about 20 min of Valley, 2-3 runs Firestrike, 2 Runs of Timespy and never broke 52c, but 20 min of Crysis 3 made it hit 68c. I am going to run my water pumps for a while and I turned up the flow speed and I could see some air bubbles, some large pushing through the top card block, so maybe that is what caused it. I know that if it continues, my only option is to drain, remove and reseat the block, but I did both cards back to back and had great contact when I tested, so I am hoping it was just air bubbles that happened to hit the right spot during my Crysis 3 tests.
post #3666 of 7589
Quote:
Originally Posted by Stateless View Post

I was able to get my EK blocks and back plate on and things were going great. Using my +200 Core/+200 Memory I was hitting pretty constant 2000 on each card with a drop to 1974 every once in a while. Heat was fine with the top card about 3-4c higher than the lower card. Through several runs of 3dmark and Valley, the highest temp was 52c on the top card. I then ran some games and things were also staying pretty steady. I then played Crysis 3 at max settings/4k and for only about 15 minutes or so and my top GPU was hitting 68c!!! My bottom card was staying steady at 42-44c no higher.

I am not sure why it would shoot up that high. I have run water loops on my GPU's since the initial Titan and never hit temps higher that 58c during the summer, so this is freaking me out. The only think I can think of is that a air bubble happen to hit and get perhaps stuck there for a bit. I did about 20 min of Valley, 2-3 runs Firestrike, 2 Runs of Timespy and never broke 52c, but 20 min of Crysis 3 made it hit 68c. I am going to run my water pumps for a while and I turned up the flow speed and I could see some air bubbles, some large pushing through the top card block, so maybe that is what caused it. I know that if it continues, my only option is to drain, remove and reseat the block, but I did both cards back to back and had great contact when I tested, so I am hoping it was just air bubbles that happened to hit the right spot during my Crysis 3 tests.

Sounds like SLI wasn't being used. Also maybe the block didn't mount great on the gpu. Also air like you said. How many blocks/rads are in your loop?
post #3667 of 7589
Quote:
Originally Posted by cisco0623 View Post

Sounds like SLI wasn't being used. Also maybe the block didn't mount great on the gpu. Also air like you said. How many blocks/rads are in your loop?

SLI was in use as I was monitoring it and I would not be hitting the frame rate I was with settings set to max. I have 3 RADS and have used original Titans in SLI, Titan Blacks, Titan X Maxwells with the same loop set up. Also my second card was always 42c or under even under load. When I came home today, I noticed lots of air bubbles in the 1st GPU and when I turned my pumps to max I saw a lot of bubbles running though the block. I am hoping it was the bubbles since it never hit that high with the benchmarking I was doing. I am letting it run now for about 2.5 hours at high flow speed and then will do some more testing.
post #3668 of 7589
How do you guys feel about purchasing the titanX pascal? Im in the market for a new gpu to match up to my pg348q ultra wide 100hz monitor. I thought about doing 1080sli but now im considering doing a titanX instead. Thoughts? Honest thoughts and feelings not just how you think you should feel since you already dropped a but load on a single card. 1 card goes for basically what 1080 sli goes for.......Should i pull the trigger on one and MAYBE another later on? I currently run a 6700k and a 5820k in a spare rig. Thoughts?
post #3669 of 7589
Sort of in the same boat as Azzazel. I'm considering picking up a txp (maybe used once they get there) but need some more good reasons to nab one. I'm going to be upgrading to either 1440p ultra wide or 4k soon, and I need to know if I should nab a Pascal Titan, or wait for Volta.
2012-2015
(14 items)
 
2015-present
(13 items)
 
 
CPUMotherboardGraphicsRAM
i7-3930k @ 3.2 MSI X79A-GD45 Plus EVGA GTX 980 SC ACX 2.0 16GB Adata 
Hard DriveHard DriveCoolingOS
1 TB Toshiba 7200RPM Intel 730 Series 256GB SSD CLLC on CPU Windows 10 
KeyboardPowerCaseMouse
Razer Blackwidow Chroma 850 Watt In Win Mana-136 Razer Deathadder Chroma 
Mouse PadAudio
Generic On-Board 
CPUMotherboardGraphicsRAM
i7-5930k @ 4.4ghz 1.276v MSI X99 Godlike Gaming MSI GTX 980 Ti Lightning @ 1460 core 3850 mem Trident Z 3200Mhz 16GB 
Hard DriveOptical DriveCoolingOS
Intel 730 series 240GB None Corsair H110i Windows 10 
KeyboardPowerCaseMouse
Razer Blackwidow Chroma EVGA 1200 P2 EVGA DG-87 Razer Deathadder Chroma 
Mouse Pad
Generic RIT Tiger Mousepad 
  hide details  
Reply
2012-2015
(14 items)
 
2015-present
(13 items)
 
 
CPUMotherboardGraphicsRAM
i7-3930k @ 3.2 MSI X79A-GD45 Plus EVGA GTX 980 SC ACX 2.0 16GB Adata 
Hard DriveHard DriveCoolingOS
1 TB Toshiba 7200RPM Intel 730 Series 256GB SSD CLLC on CPU Windows 10 
KeyboardPowerCaseMouse
Razer Blackwidow Chroma 850 Watt In Win Mana-136 Razer Deathadder Chroma 
Mouse PadAudio
Generic On-Board 
CPUMotherboardGraphicsRAM
i7-5930k @ 4.4ghz 1.276v MSI X99 Godlike Gaming MSI GTX 980 Ti Lightning @ 1460 core 3850 mem Trident Z 3200Mhz 16GB 
Hard DriveOptical DriveCoolingOS
Intel 730 series 240GB None Corsair H110i Windows 10 
KeyboardPowerCaseMouse
Razer Blackwidow Chroma EVGA 1200 P2 EVGA DG-87 Razer Deathadder Chroma 
Mouse Pad
Generic RIT Tiger Mousepad 
  hide details  
Reply
post #3670 of 7589
This is my dilemma. Suck it up with my 780ti classifieds till volta or maybe a pascal refresh in 2017 with hbm2............I've read rumors of volta next year. I don't want to drop $1200-$2400 now then something better come out in just a few months. Normally i dont play the waiting game but i feel something else is coming end of year or early next year. Maybe a 1080ti or something but thats highly unlikely.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA
Overclock.net › Forums › Graphics Cards › NVIDIA › [Official] NVIDIA Titan X Pascal Owners Thread