post #1 of 1
Thread Starter 
Hi Guys,
This is my current Rig

Intel I5 6600k
Gigabyte Z170XP SLI
Kingston HyperX 2666mhz 8GB x 2
Sapphire R9 390 Nitro Crossfire
FSP Hydro G 850W
1TB Western Digital Black Caviar
2TB Western Digital Blue.

I'm also new to watercooling and recently i got myself two Full Coverage Water Block for my graphic card from a brand called Byksi. I've installed the waterblock into my graphic card and GPUZ is showing me that my top card's VRM temperature 2 is always 60+ Celcius while my lower card is only high 20s to low 30s. I tried running Heaven Benchmark 4.0 and i noticed that my system is running very hot. The top card's temperature would reach 70C while the second one hover around 65C. I'm using two 360mm Radiator ( Aquacomputer Airplex XT 360 and XSPC AX 360 ), one aquacomputer d5 pump, a255mm t virus reservoir and one EK Supremacy Evo. And my flow is from pump to gpus ( parallel ) to top rad then to my cpu then to front rad and lastly the reservoir and pump.Is it normal to reach this kind of temperature on a fully water cooled rig ?
Edited by coqqy - 7/29/16 at 10:12pm