Overclock.net › Forums › Case Mods & Cases › Other Hardware Mods › Cables and Sleeving › enermax maxrevo 1350w psu new cables for a full custom cable solution
New Posts  All Forums:Forum Nav:

enermax maxrevo 1350w psu new cables for a full custom cable solution

post #1 of 2
Thread Starter 
hey gang!

as the title states, im looking into doing a full custom set of wires for a enermax 1350w psu.

what i need to know is, will this wire i have available to me be ok for what i want? i currently have 50m of it sitting next to me.

the writing on the side of the wire states is an 18awg gauged wire.

Rated voltage : 600/1000V.
Current rating (in free air) at 30°C : 11.5A

Maximum conductor temperature (BS 6231) : 90°C.
Maximum temperature rating (UL/CSA) : 105°C.
Approximate mass/unit length : 10kg/km

here is a link to element14 on this product.

thank you in advance!!
Edited by roamin - 8/1/16 at 7:37pm
post #2 of 2
Hello

18 AWG should be fine. I have sen PSUs with 20 AWG (china and low power)
Mine is a Enermax 600W that i have modded with custom cables. i used 18AWG Silicone Wires.
The original Wires were 18AWG to 8Pin CPU and 6Pin GPU the 24Pin ATX had different wires16-20AWG

Here are some pics:

https://drive.google.com/open?id=0B441WTQxmRWNUkVUc1BhNW9Pa2c
https://drive.google.com/open?id=0B441WTQxmRWNcFAzS1dqUENCMXM
https://drive.google.com/open?id=0B441WTQxmRWNWjF1dTlVSEx0QjQ
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Cables and Sleeving
Overclock.net › Forums › Case Mods & Cases › Other Hardware Mods › Cables and Sleeving › enermax maxrevo 1350w psu new cables for a full custom cable solution