Overclock.net › Forums › Intel › Intel CPUs › Need help with overclock (adaptive mode)
New Posts  All Forums:Forum Nav:

Need help with overclock (adaptive mode)

post #1 of 5
Thread Starter 
Hi , so i overclocked my cpu and found that 1.15 volt and 4.2 ghz its stable (haswell). But know im trying to use adaptative mode but i get 1.185 volt what i have to do to get 1.115v in adaptative mode. Thx
post #2 of 5
Try different LLC (Load Line Calibration) settings.
post #3 of 5
Thread Starter 
Already tried its changed nothing
post #4 of 5
What motherboard are you using? I'm still on sandy-bridge so I'm not too certain if the settings are still the same.

Try lowering your offset voltage to the lowest positive value then check the load voltage.
You can do negative offset values, but your CPU might crash at idle though if lowered too much due to a lower than ideal idle voltage.
The offset voltage I'm using is around -0.10.

A more detailed guide.
Edited by ConradTP - 8/4/16 at 7:38pm
post #5 of 5
Thread Starter 
z87-a i7 4770k
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Need help with overclock (adaptive mode)