Overclock.net › Forums › Cooling › Water Cooling › Are all my parts compatible please help
New Posts  All Forums:Forum Nav:

Are all my parts compatible please help

post #1 of 6
Thread Starter 
PrimoChill Rigid Ghost Compression 3/8in. ID x 1/2in. OD Fitting – Knurled Grip – 4 Pack – Anodized Silver
Alphacool Laing DDC310 - Complete Edition Eisdecke - black/acetal
PrimoChill CTR™ Compression Tube Reservoir System Phase 2 - 120mm Clea
EK-Supremacy MX AMD
Black Ice Nemesis 120GTS® Ultra Stealth U-Flow Low Profile Black Carbon Radiator
post #2 of 6
Everything look's good except the Pump and that res. You'll have to hear from someone else about those two.
Asusantor v3
(10 items)
 
  
CPUMotherboardGraphicsRAM
i7 6700k Asus z170-pro Evga GTX 1070 FTW Corsair Dominator Platinum  
Hard DriveCoolingOSKeyboard
Muskin Reactor Custom Rigid Tubing loop Windows 10 Pro Logitech G710 
PowerCase
Corsair HX 850 NZXT H440 
  hide details  
Reply
Asusantor v3
(10 items)
 
  
CPUMotherboardGraphicsRAM
i7 6700k Asus z170-pro Evga GTX 1070 FTW Corsair Dominator Platinum  
Hard DriveCoolingOSKeyboard
Muskin Reactor Custom Rigid Tubing loop Windows 10 Pro Logitech G710 
PowerCase
Corsair HX 850 NZXT H440 
  hide details  
Reply
post #3 of 6
DDC is a well known pump, DDC310, not so sure - looks like a lower power version of it? DDC is specced at 900 lph, DDC310 is 200 lph.

Looks like you're planning on cooling your CPU only? Maybe that pump is enough then.

And... just one 120 mm rad? If you build custom loop anyway, why not go with at least a 240. What's you case btw?

And what's up with your other thread? http://www.overclock.net/t/1608107/help-with-my-water-cooling-build-please

Just keep it all in one place.
post #4 of 6
Thread Starter 
I can't fit 240 in my case it's the enermax Ostrog mid tower and it's not real good for water oolong but I wanna try no matter what I could put 2 120s in deferent areas but that's probably it but I'm only cooling my cpu
post #5 of 6
Hmm I see, so not even in the top? Well, maybe you like this case, but the thing is... Building a custom loop typically costs few hundred dollars at least. It may not seem like it initially, but then you'll figure out you need this or that fitting, etc., and those costs quickly add up. Point is, the cost of new case is not as high comparatively, so you may want to get a better one early on.

Right now you have a $50 case which is dragging your whole build down.
post #6 of 6
Thread Starter 
Alright so if you could give me some good options in cases for water cooling I would do it but I don't wanna spend much more then 100 dollars on a case so I would like it to be in between 50 to 100 I want it to look sleek like the one I have and what not and also support many fans and have a nice side window if it's like 120 it's do able but I'm a strict budget right now so please if you could give me some good options for cases that are good for water cooling and have everything I want and still room for like upgrades and maybe even able to water cool my gpu as well because I'm gonna be upgrading that as well
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Are all my parts compatible please help