post #1 of 1
Thread Starter 
Just swapped out my EVGA board for my spare UD7. Got it all hooked up and my custom loop on it, and the pump constantly runs between 95-100% I've hooked up the 4 pin pwm pump to the 4 pin cpu power connector on the motherboard, and there isn't an option in the bios that reduces the pump speed. There are options but none of them work. I've also tried my power fan controller and it doesn't reduce the speed, granted I'm only using a 3 pin. Any ideas how I can lower the pump speed? The pump is part of an integrated Pump/Rad/Res - MCR 320 Drive
     
CPUMotherboardGraphicsRAM
i7 970 between 4 - 4.4GHz Gigabyte UD7 Rev 2.0 EVGA GTX 1070 FE 2000MHz CL8.8.8.24 1T tRFC 88 
Hard DriveHard DriveCoolingOS
Samsung Evo 128Gb OCZ VertexLE 100Gb Megahalems  Windows 10 Pro 64 
MonitorKeyboardPowerCase
Asus VG248QE Corsair K70  EVGA Supernova T2 1000W Lian Li PC-A20 
MouseAudio
Sidewinder MX5 Creative Zx 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
i7 970 between 4 - 4.4GHz Gigabyte UD7 Rev 2.0 EVGA GTX 1070 FE 2000MHz CL8.8.8.24 1T tRFC 88 
Hard DriveHard DriveCoolingOS
Samsung Evo 128Gb OCZ VertexLE 100Gb Megahalems  Windows 10 Pro 64 
MonitorKeyboardPowerCase
Asus VG248QE Corsair K70  EVGA Supernova T2 1000W Lian Li PC-A20 
MouseAudio
Sidewinder MX5 Creative Zx 
  hide details  
Reply