Overclock.net › Forums › Graphics Cards › NVIDIA › NVIDIA Drivers and Overclocking Software › Bios modding gtx 970 g1 help
New Posts  All Forums:Forum Nav:

Bios modding gtx 970 g1 help

post #1 of 2
Thread Starter 
So I have read up everything I think I can on bios modding for maxwell cards and made my own bios for my 970 g1 the only issue I'm having is that I entered for max boost to hit 1544 and adjusted my boost table accordingly and also entered 1281mv (I tested and know that my card will clock that high with 1275mv so gave it overhead to test further overclocks) the problem I'm having is whenever I run a stress test or even a game it only boosts to 1519mhz and only goes as high as 1275mv (using both afterburner and gpuz separately to verify both values in case one was wrong) I know its not a thermal limit as my card never gets above 75c and I'm not running into power limit since it doesn't go above 90% and I have 112% total available.

System specs are
4690k @ 4.6ghz
MSI z97s ski krait edition mono
16g of hyperx fury ddr3
Evga supernova 1000 g2
Gtx 970 g1 gaming edition

Oh and for the voltage table all of the first three lines are set to 1281mv as well as all boost states from clk 35 and up. If you need any other specific information or some screenshots I can post them up after I get home.

Thanks again in advance.
post #2 of 2
Thread Starter 
Ok so I actually figured out what the initial problem was for the clock staying the same. I had forgotten to adjust the clocks in my boost states tab of maxwell bios tweaker. Now the only issue I have is that both afterburner and gpuz read that the card is only getting 1.275v now I know that programs like this aren't always accurate on voltage reading and that sometimes they even have limits on what the sensors themselves can read. I do have a volt meter and planed to double check but cant seem to find in any manual or through a google search as to where the voltage check points are on the 970 G1. If anyone can point me to them please let me know.

Thank you again
New Posts  All Forums:Forum Nav:
  Return Home
Overclock.net › Forums › Graphics Cards › NVIDIA › NVIDIA Drivers and Overclocking Software › Bios modding gtx 970 g1 help