Overclock.net › Forums › Cooling › Water Cooling › [builld log] - Icarus - Lian Li PC V359 custom gaming/htpc
New Posts  All Forums:Forum Nav:

[builld log] - Icarus - Lian Li PC V359 custom gaming/htpc - Page 3

post #21 of 38
Thread Starter 
The new reservoir came and it's awesome. I had my heart set on a horizontal res layout so I used a right angle piece of acrylic and screwed the res mounts to it.

On second thought, I should have gotten the ddc pump top version. The res is attached to the pump with a rotatable connector fitting, and in my experience these things don't do well under stress.



After a quick trip to Home Depot, I got some Velcro, and some threaded end caps. I made a Velcro track underneath the res, and drilled holes under the pump. My idea was to have height adjustable standoffs under the pump so that I could lessen pressure on the oring in the connector fitting.

If I'm honest it looks a little ghetto. I swear I measured the location for the standoffs perfectly but oh well.

With this complete I think I am finally ready to start bending tubes.


:edit: removed the standoff on the left and it looks much better. Maybe I'll paint the bolt black at some point also.
post #22 of 38
Thread Starter 
Just started leak testing. Immediately, one of the stop plugs on the reservoir had a dead o ring and might as well have not been attached at all, further justifying my tendency to keep the res out of the way of expensive stuff.

The good:
Only used 2.5 of the 6 500mm pipes I bought
Tools used: Heat gun, t square, bending cord, beer can
Looks pretty good for a first try with no wasted pipe at all!
Petg is really fun. You can get pretty tight bends if you wear gloves and grab the really hot part.

The bad:
15hrs spent on the project today, I'm well over 80 total.
$? spent, too afraid to add it up at this point
Two trips to Home Depot today
I want to re do every single bend

The ugly:
That front left bend.
My drain/bleed pipe inlet shares the same inlet into the res as the water coming from the radiator, barely any air gets out the tube instead of just rushing back up to the res.
The other inlet on the res would work, but is attached to that stupid pipe inside the res, so I need to drain everything and disassemble the res to get a proper bleed going.

That front left bend O_o

post #23 of 38
nice smile.gif i think the way you mounted the res/pump looks a loot better with the tubing!

For the pump i would suggest going for this: http://www.performance-pcs.com/bitspower-ddc-top-tank-adapter-seat-acrylic-edition.html maybe in combination with this ddc cooler http://www.performance-pcs.com/bitspower-pump-cooler-for-ddc-mcp355-black.html

i personally use the EKWB ddc cooling bottom and it looks worlds better than the regular ddc casing! https://www.ekwb.com/shop/ek-ddc-heatsink-cover-black

but never the less an awesome build log so far!
At some point i will definitely replicate the side panels and maybe use hard tubing. but so far i like the look of my soft tubing smile.gif

Btw can you comment on filling and draining air bubbles with the horizontal res, because i was hesitant to do this config because of that!
Edited by endursa - 8/21/16 at 2:44am
post #24 of 38
Thread Starter 
Quote:
Originally Posted by endursa View Post

nice smile.gif i think the way you mounted the res/pump looks a loot better with the tubing!
thanks! smile.gif
Quote:
For the pump i would suggest going for this: http://www.performance-pcs.com/bitspower-ddc-top-tank-adapter-seat-acrylic-edition.html maybe in combination with this ddc cooler http://www.performance-pcs.com/bitspower-pump-cooler-for-ddc-mcp355-black.html

i personally use the EKWB ddc cooling bottom and it looks worlds better than the regular ddc casing! https://www.ekwb.com/shop/ek-ddc-heatsink-cover-black
yea for some reason I didn't order the ddc top version of the reservoir, not sure what I was thinking. I have that one coming on Tuesday, and I'll use some bondo or something to fill the holes I drilled to install those stand offs under the pump.
Quote:
Btw can you comment on filling and draining air bubbles with the horizontal res, because i was hesitant to do this config because of that!
its slightly annoying but not really any worse than the layout you currently have. All you need to do is attach a tube to one of your res inlets and rotate the case around to work the air into the reservoir. The hardest one to work the air out of the the radiator at top left.

Thanks again for making your build in the first place. I'm really happy with how this is turning out so far smile.gif
post #25 of 38
I really like the way you did the tube runs. I can see the nit picking of redoing some of the bends, but the runs look really good!
 
Spare Parts
(8 items)
 
 
CPUMotherboardGraphicsRAM
intel i5 750 Lynnfield Gigabyte GA-P55-USB3 ASUS Strix GTX 960 G.SKILL Ripjaws X Series 16GB (2 x 8GB) 240-Pin... 
Hard DriveCoolingCoolingCooling
Crucial BX100 SSD 500GB EKWB EK-KIT L120 Corsair SP120 Koolance 2x140mm Radiator HX-CU1402V 
CoolingCoolingOSMonitor
Corsair AF140 Bitspower VG-NGTX960 Windows 7 Ultimate 64 bit Samsung Curved 27" S27D590C 
KeyboardPowerCaseMouse
Corsair Strafe RGB Apevia Iceburg 680 watts Apevia X-Sniper 2 EVGA Torq X3 Laser 
CPUMotherboardGraphicsRAM
AMD Phenom 9750 ASUS M3A78-CM PNY XLR8 GTX 460 Corsair XMS2 (4 x 1GB) 
Hard DriveCoolingCoolingPower
Hitachi 5K500 Silenx 92mm EFFIZIO Corsair SP 120 Red LED Antec 500watt 
CPUMotherboardGraphicsRAM
Intel Core i5-6400 Skylake ASRock A170A-X1/3.1 Gigabye G1 Gaming GTX 970 Windforce CORSAIR Vengeance LPX 16GB (4 x 4GB) 288-Pin DD... 
CoolingCoolingCoolingCooling
Bykski CPU-XPR-A High Performance Acrylic Nicke... EKWB Acrylic Nickel GPU Block Monsoon MMRS Reservoir Bykski BY-PUMP-XPH-PA Water Cooling Pump 
CoolingCoolingCoolingCooling
Koolance 240 30 FPI Radiator Magicool 280 14 FPI Radiator Bitfenix Spectre PWM 120mm Fan ML140 140mm PWM Premium Magnetic Levitation Fan 
OSPowerCase
Windows 10 Pro Corsair RM Series 850 Thermaltake Suppressor F31 
  hide details  
Reply
 
Spare Parts
(8 items)
 
 
CPUMotherboardGraphicsRAM
intel i5 750 Lynnfield Gigabyte GA-P55-USB3 ASUS Strix GTX 960 G.SKILL Ripjaws X Series 16GB (2 x 8GB) 240-Pin... 
Hard DriveCoolingCoolingCooling
Crucial BX100 SSD 500GB EKWB EK-KIT L120 Corsair SP120 Koolance 2x140mm Radiator HX-CU1402V 
CoolingCoolingOSMonitor
Corsair AF140 Bitspower VG-NGTX960 Windows 7 Ultimate 64 bit Samsung Curved 27" S27D590C 
KeyboardPowerCaseMouse
Corsair Strafe RGB Apevia Iceburg 680 watts Apevia X-Sniper 2 EVGA Torq X3 Laser 
CPUMotherboardGraphicsRAM
AMD Phenom 9750 ASUS M3A78-CM PNY XLR8 GTX 460 Corsair XMS2 (4 x 1GB) 
Hard DriveCoolingCoolingPower
Hitachi 5K500 Silenx 92mm EFFIZIO Corsair SP 120 Red LED Antec 500watt 
CPUMotherboardGraphicsRAM
Intel Core i5-6400 Skylake ASRock A170A-X1/3.1 Gigabye G1 Gaming GTX 970 Windforce CORSAIR Vengeance LPX 16GB (4 x 4GB) 288-Pin DD... 
CoolingCoolingCoolingCooling
Bykski CPU-XPR-A High Performance Acrylic Nicke... EKWB Acrylic Nickel GPU Block Monsoon MMRS Reservoir Bykski BY-PUMP-XPH-PA Water Cooling Pump 
CoolingCoolingCoolingCooling
Koolance 240 30 FPI Radiator Magicool 280 14 FPI Radiator Bitfenix Spectre PWM 120mm Fan ML140 140mm PWM Premium Magnetic Levitation Fan 
OSPowerCase
Windows 10 Pro Corsair RM Series 850 Thermaltake Suppressor F31 
  hide details  
Reply
post #26 of 38
Thread Starter 
Quote:
Originally Posted by endursa View Post

Btw can you comment on filling and draining air bubbles with the horizontal res, because i was hesitant to do this config because of that!
heres a pic of bleeding the loop. I still had to tip it around from this orientation to coax the air out of the radiator that is now on top

post #27 of 38
Thread Starter 
Quote:
Originally Posted by Radnad View Post

I really like the way you did the tube runs. I can see the nit picking of redoing some of the bends, but the runs look really good!
thank you! I'm liking it as well. It's funny, I also like how it looks tipped on its side smile.gif

Once my new res with ddc pump attachment comes on Tuesday I am going to get rid of those standoffs under the pump and redo all the bends, I think I can do much better next time.
post #28 of 38
Quote:
Originally Posted by endursa View Post

nice smile.gif i think the way you mounted the res/pump looks a loot better with the tubing!

Yeah, it looks so natural, it blends in so well, I like the clean easy to look open tube run in this built

unlike the typical maze mania, in which sometimes you get lost trying to follow the complicated twist and turns. LOL biggrin.gif
LanBoy Air Orange
(27 items)
 
HTPC
(16 items)
 
Upside Down S8
(49 items)
 
CPUMotherboardGraphicsRAM
i7-3970X ASUS RAMPAGE IV Formula MSI GTX 1080 FE Crucial Ballistix Tactical Tracer 
Hard DriveHard DriveHard DriveOptical Drive
OCZ Vertex 4 Seagate Barracuda ST3000DM001 Samsung Pro None 
CoolingOSOSMonitor
DeepCool CAPTAIN 120 Ubuntu Gnome 16.04 LTS Win10 x64 Asus VG278H 
MonitorMonitorMonitorKeyboard
Asus VG278H Asus VG278H BenQ GW2750HM Logitech G510 
PowerCaseMouseMouse Pad
OCZ ZX 1250W Antec LanBoy Air Zalman ZM-GM4 StarCitizen RSI 
AudioAudioAudioOther
X-Fi MB2 Logitech Z560 Sennheiser PC 163D THRUSTMASTER T.Flight Hotas X 
OtherOtherOther
nVidia 3D Vision 2 Saitek PZ35 TrackIR 5 
CPUMotherboardGraphicsGraphics
FX-8150 ASUS Crosshair V Formula ASUS EAH6870 DC/2DI2S/1GD5 ASUS EAH6870 DC/2DI2S/1GD5 
RAMHard DriveOptical DriveOS
Mushkin Silverline 8GB OCZ Vertex 3 LG GGC-H20LI Win10 x64 
MonitorMonitorMonitorKeyboard
BenQ W5000 Samsung 50" smart TV S7 Logitech diNovo Edge 
PowerCaseAudioOther
Corsair 800w Thermatake DH 102 Logitech Z-5500 Thermaltake Water 2.0 Performer CLW0215 
CPUMotherboardGraphicsGraphics
BX80662I76700K GIGABYTE G1 Gaming GA-Z170X MSI GTX 1080 Sea Hawk EK X MSI GTX 1080 Sea Hawk EK X 
RAMRAMHard DriveHard Drive
CMU32GX4M2C3200C16R CMU32GX4M2A2666C16 OCZ Vertex 4 Seagate ST8000NM0055 
Hard DriveHard DriveOptical DriveCooling
SAMSUNG 950 PRO M.2 SAMSUNG 950 PRO None EK-CoolStream PE 360 (Triple) 
CoolingCoolingCoolingCooling
LED 3mm TWIN ULTRA WHITE LED 5mm TWIN ULTRA WHITE EK-AF Ball Valve (10mm) G1/4 - Black Nickel EK-D5 PWM G2 Motor (12V DC PWM Pump Motor) 
CoolingCoolingCoolingCooling
EK-HD PETG Tube 12/16mm 1000mm (8pcs) EK-HDC Fitting 16mm G1/4 - Red EK-ACF Fitting 12/16mm - Red TUBE PrimoChill PrimoFlex Advanced LRT 15,9 / 1... 
CoolingCoolingCoolingCooling
QD3-MSG4-BK QD3-FSG4-BK EK-CoolStream PE 240 (Dual) EK-CoolStream XE 360 (Triple) 
CoolingCoolingCoolingCooling
EK-XTOP Revo D5 PWM - Plexi (incl. pump) EK-Supremacy EVO - Nickel EK-FC Terminal TRIPLE Parallel - Plexi EK-FC Terminal BLANK Parallel 
CoolingOSOSOS
EK-UNI Pump Bracket (120mm FAN) Ubuntu Gnome 16.04 LTS Win10 x64 Win7 x64 
MonitorMonitorMonitorMonitor
Asus VG278H Asus VG278H Asus VG278H BenQ GW2750HM 
KeyboardPowerCaseMouse
Logitech G510 PS-TPG-1500DPCTXX-T CaseLabs Mercury S8 + Pedestal + Pedestal  Logitech G600 
Mouse PadAudioAudioAudio
StarCitizen RSI Creative Labs Core 128 Logitech Z560 Sennheiser PC 163D 
OtherOtherOtherOther
THRUSTMASTER T.Flight Hotas X Nvidia 3D Vision 2 Saitek PZ35 TrackIR 5 
Other
PS-TPG-0850DPCGUS-R 
  hide details  
Reply
LanBoy Air Orange
(27 items)
 
HTPC
(16 items)
 
Upside Down S8
(49 items)
 
CPUMotherboardGraphicsRAM
i7-3970X ASUS RAMPAGE IV Formula MSI GTX 1080 FE Crucial Ballistix Tactical Tracer 
Hard DriveHard DriveHard DriveOptical Drive
OCZ Vertex 4 Seagate Barracuda ST3000DM001 Samsung Pro None 
CoolingOSOSMonitor
DeepCool CAPTAIN 120 Ubuntu Gnome 16.04 LTS Win10 x64 Asus VG278H 
MonitorMonitorMonitorKeyboard
Asus VG278H Asus VG278H BenQ GW2750HM Logitech G510 
PowerCaseMouseMouse Pad
OCZ ZX 1250W Antec LanBoy Air Zalman ZM-GM4 StarCitizen RSI 
AudioAudioAudioOther
X-Fi MB2 Logitech Z560 Sennheiser PC 163D THRUSTMASTER T.Flight Hotas X 
OtherOtherOther
nVidia 3D Vision 2 Saitek PZ35 TrackIR 5 
CPUMotherboardGraphicsGraphics
FX-8150 ASUS Crosshair V Formula ASUS EAH6870 DC/2DI2S/1GD5 ASUS EAH6870 DC/2DI2S/1GD5 
RAMHard DriveOptical DriveOS
Mushkin Silverline 8GB OCZ Vertex 3 LG GGC-H20LI Win10 x64 
MonitorMonitorMonitorKeyboard
BenQ W5000 Samsung 50" smart TV S7 Logitech diNovo Edge 
PowerCaseAudioOther
Corsair 800w Thermatake DH 102 Logitech Z-5500 Thermaltake Water 2.0 Performer CLW0215 
CPUMotherboardGraphicsGraphics
BX80662I76700K GIGABYTE G1 Gaming GA-Z170X MSI GTX 1080 Sea Hawk EK X MSI GTX 1080 Sea Hawk EK X 
RAMRAMHard DriveHard Drive
CMU32GX4M2C3200C16R CMU32GX4M2A2666C16 OCZ Vertex 4 Seagate ST8000NM0055 
Hard DriveHard DriveOptical DriveCooling
SAMSUNG 950 PRO M.2 SAMSUNG 950 PRO None EK-CoolStream PE 360 (Triple) 
CoolingCoolingCoolingCooling
LED 3mm TWIN ULTRA WHITE LED 5mm TWIN ULTRA WHITE EK-AF Ball Valve (10mm) G1/4 - Black Nickel EK-D5 PWM G2 Motor (12V DC PWM Pump Motor) 
CoolingCoolingCoolingCooling
EK-HD PETG Tube 12/16mm 1000mm (8pcs) EK-HDC Fitting 16mm G1/4 - Red EK-ACF Fitting 12/16mm - Red TUBE PrimoChill PrimoFlex Advanced LRT 15,9 / 1... 
CoolingCoolingCoolingCooling
QD3-MSG4-BK QD3-FSG4-BK EK-CoolStream PE 240 (Dual) EK-CoolStream XE 360 (Triple) 
CoolingCoolingCoolingCooling
EK-XTOP Revo D5 PWM - Plexi (incl. pump) EK-Supremacy EVO - Nickel EK-FC Terminal TRIPLE Parallel - Plexi EK-FC Terminal BLANK Parallel 
CoolingOSOSOS
EK-UNI Pump Bracket (120mm FAN) Ubuntu Gnome 16.04 LTS Win10 x64 Win7 x64 
MonitorMonitorMonitorMonitor
Asus VG278H Asus VG278H Asus VG278H BenQ GW2750HM 
KeyboardPowerCaseMouse
Logitech G510 PS-TPG-1500DPCTXX-T CaseLabs Mercury S8 + Pedestal + Pedestal  Logitech G600 
Mouse PadAudioAudioAudio
StarCitizen RSI Creative Labs Core 128 Logitech Z560 Sennheiser PC 163D 
OtherOtherOtherOther
THRUSTMASTER T.Flight Hotas X Nvidia 3D Vision 2 Saitek PZ35 TrackIR 5 
Other
PS-TPG-0850DPCGUS-R 
  hide details  
Reply
post #29 of 38
Thread Starter 
Alright guys I'm getting pretty close to done here. I redid all the bends and I think they are much better. If I am super nit picking I do want to do them all again, and I unfortunately scratched some of them, but I am out of tube and I think this looks pretty darn good.

In addition to the new tube bends, i swapped out the reservoir for the same eisbecher 150ml reservoir, but this time with the ddc pump top base for extra structural integrity. Related to that, I redid the reservoir mounting, the metal mounts now have Velcro on them and are stuck to the bottom of the case, and sitting on some rubber furniture anti skid mats for noise isolation.

I also made a "modesty plate" out of some scrap acrylic which I painted black and placed behind the pump and res to hide all the wires.

Still to do is figure out how/where to incorporate a power switch, and also to mount a flirc SE board behind the modesty plate so that I have integrated IR control which can wake the PC from hibernate.

Here's some pics of bleeding the loop and leak testing. The top isn't screwed on because the pump power cord is running out the front of the case and preventing the front panel from going all the way down.











And for fun, here's a 360degree video I took with my phone.

http://youtube.com/watch?v=l1XqHxW4gGM
Edited by jdoo - 8/26/16 at 1:41pm
post #30 of 38
Very nice! thumb.gif

I'll suggest a Yellow fluid (no.. no.. not pee tongue.gif)

either Pastel Yellow, or some other type of translucent Yellow, it will combine so well with the remaining items.

Pastel White will work too, but Yellow definitely combines better in that build.
LanBoy Air Orange
(27 items)
 
HTPC
(16 items)
 
Upside Down S8
(49 items)
 
CPUMotherboardGraphicsRAM
i7-3970X ASUS RAMPAGE IV Formula MSI GTX 1080 FE Crucial Ballistix Tactical Tracer 
Hard DriveHard DriveHard DriveOptical Drive
OCZ Vertex 4 Seagate Barracuda ST3000DM001 Samsung Pro None 
CoolingOSOSMonitor
DeepCool CAPTAIN 120 Ubuntu Gnome 16.04 LTS Win10 x64 Asus VG278H 
MonitorMonitorMonitorKeyboard
Asus VG278H Asus VG278H BenQ GW2750HM Logitech G510 
PowerCaseMouseMouse Pad
OCZ ZX 1250W Antec LanBoy Air Zalman ZM-GM4 StarCitizen RSI 
AudioAudioAudioOther
X-Fi MB2 Logitech Z560 Sennheiser PC 163D THRUSTMASTER T.Flight Hotas X 
OtherOtherOther
nVidia 3D Vision 2 Saitek PZ35 TrackIR 5 
CPUMotherboardGraphicsGraphics
FX-8150 ASUS Crosshair V Formula ASUS EAH6870 DC/2DI2S/1GD5 ASUS EAH6870 DC/2DI2S/1GD5 
RAMHard DriveOptical DriveOS
Mushkin Silverline 8GB OCZ Vertex 3 LG GGC-H20LI Win10 x64 
MonitorMonitorMonitorKeyboard
BenQ W5000 Samsung 50" smart TV S7 Logitech diNovo Edge 
PowerCaseAudioOther
Corsair 800w Thermatake DH 102 Logitech Z-5500 Thermaltake Water 2.0 Performer CLW0215 
CPUMotherboardGraphicsGraphics
BX80662I76700K GIGABYTE G1 Gaming GA-Z170X MSI GTX 1080 Sea Hawk EK X MSI GTX 1080 Sea Hawk EK X 
RAMRAMHard DriveHard Drive
CMU32GX4M2C3200C16R CMU32GX4M2A2666C16 OCZ Vertex 4 Seagate ST8000NM0055 
Hard DriveHard DriveOptical DriveCooling
SAMSUNG 950 PRO M.2 SAMSUNG 950 PRO None EK-CoolStream PE 360 (Triple) 
CoolingCoolingCoolingCooling
LED 3mm TWIN ULTRA WHITE LED 5mm TWIN ULTRA WHITE EK-AF Ball Valve (10mm) G1/4 - Black Nickel EK-D5 PWM G2 Motor (12V DC PWM Pump Motor) 
CoolingCoolingCoolingCooling
EK-HD PETG Tube 12/16mm 1000mm (8pcs) EK-HDC Fitting 16mm G1/4 - Red EK-ACF Fitting 12/16mm - Red TUBE PrimoChill PrimoFlex Advanced LRT 15,9 / 1... 
CoolingCoolingCoolingCooling
QD3-MSG4-BK QD3-FSG4-BK EK-CoolStream PE 240 (Dual) EK-CoolStream XE 360 (Triple) 
CoolingCoolingCoolingCooling
EK-XTOP Revo D5 PWM - Plexi (incl. pump) EK-Supremacy EVO - Nickel EK-FC Terminal TRIPLE Parallel - Plexi EK-FC Terminal BLANK Parallel 
CoolingOSOSOS
EK-UNI Pump Bracket (120mm FAN) Ubuntu Gnome 16.04 LTS Win10 x64 Win7 x64 
MonitorMonitorMonitorMonitor
Asus VG278H Asus VG278H Asus VG278H BenQ GW2750HM 
KeyboardPowerCaseMouse
Logitech G510 PS-TPG-1500DPCTXX-T CaseLabs Mercury S8 + Pedestal + Pedestal  Logitech G600 
Mouse PadAudioAudioAudio
StarCitizen RSI Creative Labs Core 128 Logitech Z560 Sennheiser PC 163D 
OtherOtherOtherOther
THRUSTMASTER T.Flight Hotas X Nvidia 3D Vision 2 Saitek PZ35 TrackIR 5 
Other
PS-TPG-0850DPCGUS-R 
  hide details  
Reply
LanBoy Air Orange
(27 items)
 
HTPC
(16 items)
 
Upside Down S8
(49 items)
 
CPUMotherboardGraphicsRAM
i7-3970X ASUS RAMPAGE IV Formula MSI GTX 1080 FE Crucial Ballistix Tactical Tracer 
Hard DriveHard DriveHard DriveOptical Drive
OCZ Vertex 4 Seagate Barracuda ST3000DM001 Samsung Pro None 
CoolingOSOSMonitor
DeepCool CAPTAIN 120 Ubuntu Gnome 16.04 LTS Win10 x64 Asus VG278H 
MonitorMonitorMonitorKeyboard
Asus VG278H Asus VG278H BenQ GW2750HM Logitech G510 
PowerCaseMouseMouse Pad
OCZ ZX 1250W Antec LanBoy Air Zalman ZM-GM4 StarCitizen RSI 
AudioAudioAudioOther
X-Fi MB2 Logitech Z560 Sennheiser PC 163D THRUSTMASTER T.Flight Hotas X 
OtherOtherOther
nVidia 3D Vision 2 Saitek PZ35 TrackIR 5 
CPUMotherboardGraphicsGraphics
FX-8150 ASUS Crosshair V Formula ASUS EAH6870 DC/2DI2S/1GD5 ASUS EAH6870 DC/2DI2S/1GD5 
RAMHard DriveOptical DriveOS
Mushkin Silverline 8GB OCZ Vertex 3 LG GGC-H20LI Win10 x64 
MonitorMonitorMonitorKeyboard
BenQ W5000 Samsung 50" smart TV S7 Logitech diNovo Edge 
PowerCaseAudioOther
Corsair 800w Thermatake DH 102 Logitech Z-5500 Thermaltake Water 2.0 Performer CLW0215 
CPUMotherboardGraphicsGraphics
BX80662I76700K GIGABYTE G1 Gaming GA-Z170X MSI GTX 1080 Sea Hawk EK X MSI GTX 1080 Sea Hawk EK X 
RAMRAMHard DriveHard Drive
CMU32GX4M2C3200C16R CMU32GX4M2A2666C16 OCZ Vertex 4 Seagate ST8000NM0055 
Hard DriveHard DriveOptical DriveCooling
SAMSUNG 950 PRO M.2 SAMSUNG 950 PRO None EK-CoolStream PE 360 (Triple) 
CoolingCoolingCoolingCooling
LED 3mm TWIN ULTRA WHITE LED 5mm TWIN ULTRA WHITE EK-AF Ball Valve (10mm) G1/4 - Black Nickel EK-D5 PWM G2 Motor (12V DC PWM Pump Motor) 
CoolingCoolingCoolingCooling
EK-HD PETG Tube 12/16mm 1000mm (8pcs) EK-HDC Fitting 16mm G1/4 - Red EK-ACF Fitting 12/16mm - Red TUBE PrimoChill PrimoFlex Advanced LRT 15,9 / 1... 
CoolingCoolingCoolingCooling
QD3-MSG4-BK QD3-FSG4-BK EK-CoolStream PE 240 (Dual) EK-CoolStream XE 360 (Triple) 
CoolingCoolingCoolingCooling
EK-XTOP Revo D5 PWM - Plexi (incl. pump) EK-Supremacy EVO - Nickel EK-FC Terminal TRIPLE Parallel - Plexi EK-FC Terminal BLANK Parallel 
CoolingOSOSOS
EK-UNI Pump Bracket (120mm FAN) Ubuntu Gnome 16.04 LTS Win10 x64 Win7 x64 
MonitorMonitorMonitorMonitor
Asus VG278H Asus VG278H Asus VG278H BenQ GW2750HM 
KeyboardPowerCaseMouse
Logitech G510 PS-TPG-1500DPCTXX-T CaseLabs Mercury S8 + Pedestal + Pedestal  Logitech G600 
Mouse PadAudioAudioAudio
StarCitizen RSI Creative Labs Core 128 Logitech Z560 Sennheiser PC 163D 
OtherOtherOtherOther
THRUSTMASTER T.Flight Hotas X Nvidia 3D Vision 2 Saitek PZ35 TrackIR 5 
Other
PS-TPG-0850DPCGUS-R 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › [builld log] - Icarus - Lian Li PC V359 custom gaming/htpc