Overclock.net › Forums › Cooling › Water Cooling › First Water cooling build- Need Help!
New Posts  All Forums:Forum Nav:

First Water cooling build- Need Help! - Page 5

post #41 of 65
Quote:
Originally Posted by PunkX 1 View Post

I do appreciate all the help guys but unfortunately the speed isn't reducing. I tried lowering it through the bios but it seems like since the pump can only be connected to the PSU molex connector it runs at max Snorkle.gif

That is correct. I think you would need a 4pin connector and PWM on the motherboard to adjust it.

Flip the RES devil.gif

TCO
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Strix Z270i Gaming GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 G2 Caselabs S3 
  hide details  
Reply
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Strix Z270i Gaming GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 G2 Caselabs S3 
  hide details  
Reply
post #42 of 65
Quote:
Originally Posted by PunkX 1 View Post

I do appreciate all the help guys but unfortunately the speed isn't reducing. I tried lowering it through the bios but it seems like since the pump can only be connected to the PSU molex connector it runs at max Snorkle.gif

Are you good with electronics ? I have some PCB and circuits for controlling pump / fan speed. Really simple to build and bullet proof (up to 5A with passive cooling ) thumb.gif
Lili-chan
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 4790K - 4.5Ghz - Undervolted - WC ASUS Z97A EVGA Geforce GTX 1070 Founders Edition + EKWB F... Corsair Vengance 2x8 2400Mhz DDR3 
Hard DriveHard DriveHard DriveHard Drive
WD Green 1TB WD Blue 1TB Samsung EVO 840 250GB Intel 600p 1TB 
Optical DriveCoolingOSMonitor
No they are just horrible Custom Watercooling Windows 10 LG 29UM58-P 
KeyboardPowerCaseMouse
Kingston Hyper X FPS Seasonic M12 750W LIAN LI PC A05N HyperX Pulsefire 
Mouse PadAudio
A few Native Instrument Audio 2 DJ 
  hide details  
Reply
Lili-chan
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 4790K - 4.5Ghz - Undervolted - WC ASUS Z97A EVGA Geforce GTX 1070 Founders Edition + EKWB F... Corsair Vengance 2x8 2400Mhz DDR3 
Hard DriveHard DriveHard DriveHard Drive
WD Green 1TB WD Blue 1TB Samsung EVO 840 250GB Intel 600p 1TB 
Optical DriveCoolingOSMonitor
No they are just horrible Custom Watercooling Windows 10 LG 29UM58-P 
KeyboardPowerCaseMouse
Kingston Hyper X FPS Seasonic M12 750W LIAN LI PC A05N HyperX Pulsefire 
Mouse PadAudio
A few Native Instrument Audio 2 DJ 
  hide details  
Reply
post #43 of 65
Quote:
Originally Posted by lexer View Post

Are you good with electronics ? I have some PCB and circuits for controlling pump / fan speed. Really simple to build and bullet proof (up to 5A with passive cooling ) thumb.gif



TCO
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Strix Z270i Gaming GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 G2 Caselabs S3 
  hide details  
Reply
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Strix Z270i Gaming GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 G2 Caselabs S3 
  hide details  
Reply
post #44 of 65
Thread Starter 
Quote:
Originally Posted by lexer View Post

Are you good with electronics ? I have some PCB and circuits for controlling pump / fan speed. Really simple to build and bullet proof (up to 5A with passive cooling ) thumb.gif

I'm not. But is it easy? Also it's been around a day and a half now and there's still air bubbles. I move the case around and see the bubbles gushing through the tubes. Will filling the res up to the brim help? Is the pump that I have a bad one? In the sense of the high flow rate.
Edited by PunkX 1 - 9/26/16 at 8:39pm
Kukumonster
(13 items)
 
A pleasant surprise :)
Cooler Master USP 100 Black Edition
Value redefined.
Amd Athlon II X3 435
CPUMotherboardGraphicsRAM
Core i5 2320 Intel DH67BL Sapphire R9 285 Corsair 8GB (4x2)  
Hard DriveHard DriveHard DriveCooling
Kingston HyperX Fury 240GB  WD Blue 1TB Seagate Barracuda 500GB Noctua NH-C14S 
CoolingOSMonitorPower
Noctua NF-A140*2 Windows 10 Pro (TP) LG 22" 1080p  Seasonic G-550 F3 550W 
Case
Cooler Master USP100 Black Edition 
  hide details  
Reply
Kukumonster
(13 items)
 
A pleasant surprise :)
Cooler Master USP 100 Black Edition
Value redefined.
Amd Athlon II X3 435
CPUMotherboardGraphicsRAM
Core i5 2320 Intel DH67BL Sapphire R9 285 Corsair 8GB (4x2)  
Hard DriveHard DriveHard DriveCooling
Kingston HyperX Fury 240GB  WD Blue 1TB Seagate Barracuda 500GB Noctua NH-C14S 
CoolingOSMonitorPower
Noctua NF-A140*2 Windows 10 Pro (TP) LG 22" 1080p  Seasonic G-550 F3 550W 
Case
Cooler Master USP100 Black Edition 
  hide details  
Reply
post #45 of 65
Quote:
Originally Posted by PunkX 1 View Post

I'm not. But is it easy? Also it's been around a day and a half now and there's still air bubbles. I move the case around and see the bubbles gushing through the tubes. Will filling the res up to the brim help? Is the pump that I have a bad one? In the sense of the high flow rate.

If it is pushing fluid, it is a good pump.

Filling the res as high as you can but just leaving a small 1/4" gap at the top would be great. As the fluid replaces the air inside of the radiators, then just top the res off until there is little to no air in the system.

TCO
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Strix Z270i Gaming GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 G2 Caselabs S3 
  hide details  
Reply
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Strix Z270i Gaming GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 G2 Caselabs S3 
  hide details  
Reply
post #46 of 65
Quote:
Originally Posted by PunkX 1 View Post

I'm not. But is it easy? Also it's been around a day and a half now and there's still air bubbles. I move the case around and see the bubbles gushing through the tubes. Will filling the res up to the brim help? Is the pump that I have a bad one? In the sense of the high flow rate.

INVERT THE RESERVOIR biggrin.gif AHAHAH

if you fill the reservoir to the top will help with the bubbles, but due your pump have a high flow and you are running a configuration that isn't suited for that reservoir .... removing all the bubbles from your loop is hard

The circuit is super simple i can calculate the values for you, is just the LM 338, one resistor, one pot and a few capacitors.
have a read http://diyaudioprojects.com/Technical/Voltage-Regulator/
I build one for a friend to controlling the speed of a D5 Strong, with a decent heat sink the LM338 is a really good linear voltage regulator rolleyes.gif
Edited by lexer - 9/26/16 at 9:04pm
Lili-chan
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 4790K - 4.5Ghz - Undervolted - WC ASUS Z97A EVGA Geforce GTX 1070 Founders Edition + EKWB F... Corsair Vengance 2x8 2400Mhz DDR3 
Hard DriveHard DriveHard DriveHard Drive
WD Green 1TB WD Blue 1TB Samsung EVO 840 250GB Intel 600p 1TB 
Optical DriveCoolingOSMonitor
No they are just horrible Custom Watercooling Windows 10 LG 29UM58-P 
KeyboardPowerCaseMouse
Kingston Hyper X FPS Seasonic M12 750W LIAN LI PC A05N HyperX Pulsefire 
Mouse PadAudio
A few Native Instrument Audio 2 DJ 
  hide details  
Reply
Lili-chan
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 4790K - 4.5Ghz - Undervolted - WC ASUS Z97A EVGA Geforce GTX 1070 Founders Edition + EKWB F... Corsair Vengance 2x8 2400Mhz DDR3 
Hard DriveHard DriveHard DriveHard Drive
WD Green 1TB WD Blue 1TB Samsung EVO 840 250GB Intel 600p 1TB 
Optical DriveCoolingOSMonitor
No they are just horrible Custom Watercooling Windows 10 LG 29UM58-P 
KeyboardPowerCaseMouse
Kingston Hyper X FPS Seasonic M12 750W LIAN LI PC A05N HyperX Pulsefire 
Mouse PadAudio
A few Native Instrument Audio 2 DJ 
  hide details  
Reply
post #47 of 65
Quote:
Originally Posted by PunkX 1 View Post

Is there anything I can do to remedy it?

Run a bypass tube from before the gpu to after the gpu, basically setup gpu and cpu in parellel. The extra tube will essentially be like having a fatter tube, which will provide less restriction.
post #48 of 65
Thread Starter 
Quote:
Originally Posted by lexer View Post

INVERT THE RESERVOIR biggrin.gif AHAHAH

if you fill the reservoir to the top will help with the bubbles, but due your pump have a high flow and you are running a configuration that isn't suited for that reservoir .... removing all the bubbles from your loop is hard

The circuit is super simple i can calculate the values for you, is just the LM 338, one resistor, one pot and a few capacitors.
have a read http://diyaudioprojects.com/Technical/Voltage-Regulator/
I build one for a friend to controlling the speed of a D5 Strong, with a decent heat sink the LM338 is a really good linear voltage regulator rolleyes.gif

That seems complicated :DIf I invert the reservoir, the outlet would be at the bottom and the top would be the inlet. There would be another port next to the inlet, so how do I plug that up?
Edited by PunkX 1 - 9/26/16 at 9:36pm
Kukumonster
(13 items)
 
A pleasant surprise :)
Cooler Master USP 100 Black Edition
Value redefined.
Amd Athlon II X3 435
CPUMotherboardGraphicsRAM
Core i5 2320 Intel DH67BL Sapphire R9 285 Corsair 8GB (4x2)  
Hard DriveHard DriveHard DriveCooling
Kingston HyperX Fury 240GB  WD Blue 1TB Seagate Barracuda 500GB Noctua NH-C14S 
CoolingOSMonitorPower
Noctua NF-A140*2 Windows 10 Pro (TP) LG 22" 1080p  Seasonic G-550 F3 550W 
Case
Cooler Master USP100 Black Edition 
  hide details  
Reply
Kukumonster
(13 items)
 
A pleasant surprise :)
Cooler Master USP 100 Black Edition
Value redefined.
Amd Athlon II X3 435
CPUMotherboardGraphicsRAM
Core i5 2320 Intel DH67BL Sapphire R9 285 Corsair 8GB (4x2)  
Hard DriveHard DriveHard DriveCooling
Kingston HyperX Fury 240GB  WD Blue 1TB Seagate Barracuda 500GB Noctua NH-C14S 
CoolingOSMonitorPower
Noctua NF-A140*2 Windows 10 Pro (TP) LG 22" 1080p  Seasonic G-550 F3 550W 
Case
Cooler Master USP100 Black Edition 
  hide details  
Reply
post #49 of 65
Thread Starter 
Quote:
Originally Posted by spinFX View Post

Run a bypass tube from before the gpu to after the gpu, basically setup gpu and cpu in parellel. The extra tube will essentially be like having a fatter tube, which will provide less restriction.

What does that mean? I'm really sorry but since I'm new to this I don't understand.
Kukumonster
(13 items)
 
A pleasant surprise :)
Cooler Master USP 100 Black Edition
Value redefined.
Amd Athlon II X3 435
CPUMotherboardGraphicsRAM
Core i5 2320 Intel DH67BL Sapphire R9 285 Corsair 8GB (4x2)  
Hard DriveHard DriveHard DriveCooling
Kingston HyperX Fury 240GB  WD Blue 1TB Seagate Barracuda 500GB Noctua NH-C14S 
CoolingOSMonitorPower
Noctua NF-A140*2 Windows 10 Pro (TP) LG 22" 1080p  Seasonic G-550 F3 550W 
Case
Cooler Master USP100 Black Edition 
  hide details  
Reply
Kukumonster
(13 items)
 
A pleasant surprise :)
Cooler Master USP 100 Black Edition
Value redefined.
Amd Athlon II X3 435
CPUMotherboardGraphicsRAM
Core i5 2320 Intel DH67BL Sapphire R9 285 Corsair 8GB (4x2)  
Hard DriveHard DriveHard DriveCooling
Kingston HyperX Fury 240GB  WD Blue 1TB Seagate Barracuda 500GB Noctua NH-C14S 
CoolingOSMonitorPower
Noctua NF-A140*2 Windows 10 Pro (TP) LG 22" 1080p  Seasonic G-550 F3 550W 
Case
Cooler Master USP100 Black Edition 
  hide details  
Reply
post #50 of 65
Thread Starter 
Quote:
Originally Posted by TheCautiousOne View Post

If it is pushing fluid, it is a good pump.

Filling the res as high as you can but just leaving a small 1/4" gap at the top would be great. As the fluid replaces the air inside of the radiators, then just top the res off until there is little to no air in the system.

TCO

So I could try this and check before inverting the res?
Kukumonster
(13 items)
 
A pleasant surprise :)
Cooler Master USP 100 Black Edition
Value redefined.
Amd Athlon II X3 435
CPUMotherboardGraphicsRAM
Core i5 2320 Intel DH67BL Sapphire R9 285 Corsair 8GB (4x2)  
Hard DriveHard DriveHard DriveCooling
Kingston HyperX Fury 240GB  WD Blue 1TB Seagate Barracuda 500GB Noctua NH-C14S 
CoolingOSMonitorPower
Noctua NF-A140*2 Windows 10 Pro (TP) LG 22" 1080p  Seasonic G-550 F3 550W 
Case
Cooler Master USP100 Black Edition 
  hide details  
Reply
Kukumonster
(13 items)
 
A pleasant surprise :)
Cooler Master USP 100 Black Edition
Value redefined.
Amd Athlon II X3 435
CPUMotherboardGraphicsRAM
Core i5 2320 Intel DH67BL Sapphire R9 285 Corsair 8GB (4x2)  
Hard DriveHard DriveHard DriveCooling
Kingston HyperX Fury 240GB  WD Blue 1TB Seagate Barracuda 500GB Noctua NH-C14S 
CoolingOSMonitorPower
Noctua NF-A140*2 Windows 10 Pro (TP) LG 22" 1080p  Seasonic G-550 F3 550W 
Case
Cooler Master USP100 Black Edition 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › First Water cooling build- Need Help!