There are people here with connections and deep pockets. One of you MUST know someone who knows someone at Benq who can convince them to release a firmware update with the missing "Single strobe" 60hz-85hz override, put back in the firmware.
Originally Posted by Glide
What is the point of double strobing the image? It looks worse than nothing at all.
I have NO idea why 'double strobing' is even a feature. People can either use single strobe at 60hz, or sample and hold. It's totally illogical.
I really hope Chief reads this. They need a firmware update.
If they release one, I'll buy the monitor and flash the firmware with the RT809f flasher.
BTW max Vertical total at 2560x1440 is 1825. Strobe Crosstalk is reduced considerably. If the default VT at 120hz is 1449, this is a 25% increase in VT And thus a 25% reduction in crosstalk. This is IDENTICAL to the XL2720Z when going from VT 1144 to VT 1500.
1854 VT if you reduce the horizontal total.
This means that the "single strobe" override can EASILY be implemented in this monitor, since they're using familiar strobe methods we are all used to.
One of you guys here HAVE to be able to contact Benq. Please. They have an email and 1-800#, but Chief would have the most power to make something happen.
Plus ** THIS IS IMPORTANT FOR 60HZ CONSOLES! **. I mean who wants to double strobe at 60hz over HDMI?Edited by Falkentyne - 10/9/16 at 3:45pm