Overclock.net › Forums › Cooling › Water Cooling › Aquaero 6 Pro : My EK Fans Wont Run
New Posts  All Forums:Forum Nav:

Aquaero 6 Pro : My EK Fans Wont Run

post #1 of 2
Thread Starter 
Hey guys so I have an Aquaero 6 Pro. I am running 20 EK Vardar 2000rpm fans and using Splitty 9's.

The bottom 8 fans are push config and 4 fans in the front of case are mounted standard, those are hooked up to splitty 9's and in to Fan 1

The top 8 are in pull config and run into splitty9's and in to Fan 2

They wont run I have Aqau suite on PC and there set to 100% and nothing.

Any help greatly appreciated!!

Build log is here for reference:

http://www.overclock.net/t/1606126/build-log-caselabs-thw10-intel-6950x-w-dual-titan-xp
post #2 of 2
Thread Starter 
[Solved]

I was running the Splitty 9's in parallel and was causing an issue. Resolved by running each input from the splitters in to the Aquaero directly.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Aquaero 6 Pro : My EK Fans Wont Run