Overclock.net › Forums › Manufacturer Forums › EK Water Blocks › d5 pwm problem
New Posts  All Forums:Forum Nav:

d5 pwm problem

post #1 of 14
Thread Starter 
hi my d5 pump is not circulating through the res
post #2 of 14
If you want an answer to your question, it probably would be helpful to provide more information like: how your loop is setup (picture), where you connected your pump to, at which speed you are running the pump etc.
post #3 of 14
Thread Starter 


Pump is connected through molex back of the psu
post #4 of 14
which direction is your flow? have you titled the case in all directions with the pump running? i am guessing you have a big ole air bubble in the line (or rad) somewhere
    
CPUMotherboardGraphicsGraphics
phenom ii x6 1100t gigabyte ga990fxa ud5 gigabyte 480gtx gigabyte 480gtx 
GraphicsRAMHard DriveHard Drive
evga 480gtx corsair vengence ddr3 1600 ocz agility 3 sdd ocz agility 3 sdd 
Hard DriveOptical DriveCoolingCooling
maxtor hdd asus blu-ray reader/burner xspc ex360 rad (x2)  swiftec mcp655 pump w/bitspower pump kit and v2... 
CoolingCoolingCoolingCooling
laing d5 pump w/bitspower pump kit and v2 pump top heatkiller cpu block koolance nv480gtx full vga blocks ek northbridge block 
CoolingCoolingOSMonitor
lamptron fc5 bitspower 150 black ice reservoir vista ultimate 64 bit asus s248h-p hdmi led 
MonitorMonitorKeyboardPower
acer x183h acer x183h corsair k60 mechanical silverstone strider 1000 silver 
CaseMouseMouse PadAudio
corsair 500r corsair m60 func 1030 archetype creative x-fi xtreme gamer 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
phenom ii x6 1100t gigabyte ga990fxa ud5 gigabyte 480gtx gigabyte 480gtx 
GraphicsRAMHard DriveHard Drive
evga 480gtx corsair vengence ddr3 1600 ocz agility 3 sdd ocz agility 3 sdd 
Hard DriveOptical DriveCoolingCooling
maxtor hdd asus blu-ray reader/burner xspc ex360 rad (x2)  swiftec mcp655 pump w/bitspower pump kit and v2... 
CoolingCoolingCoolingCooling
laing d5 pump w/bitspower pump kit and v2 pump top heatkiller cpu block koolance nv480gtx full vga blocks ek northbridge block 
CoolingCoolingOSMonitor
lamptron fc5 bitspower 150 black ice reservoir vista ultimate 64 bit asus s248h-p hdmi led 
MonitorMonitorKeyboardPower
acer x183h acer x183h corsair k60 mechanical silverstone strider 1000 silver 
CaseMouseMouse PadAudio
corsair 500r corsair m60 func 1030 archetype creative x-fi xtreme gamer 
  hide details  
Reply
post #5 of 14
Why do you think it's not circulating? OH, and you have the CPU block connected wrong technically, the inlet is the most center port and the outlet port is the most outer port, so they tubing should be swapped from the way you have it. Now this shouldn't cause a flow problem but it will cause a slightly higher temp by a few degrees.
Edited by Radnad - 10/5/16 at 8:38pm
 
Spare Parts
(8 items)
 
 
CPUMotherboardGraphicsRAM
intel i5 750 Lynnfield Gigabyte GA-P55-USB3 ASUS Strix GTX 960 G.SKILL Ripjaws X Series 16GB (2 x 8GB) 240-Pin... 
Hard DriveCoolingCoolingCooling
Crucial BX100 SSD 500GB EKWB EK-KIT L120 Corsair SP120 Koolance 2x140mm Radiator HX-CU1402V 
CoolingCoolingOSMonitor
Corsair AF140 Bitspower VG-NGTX960 Windows 7 Ultimate 64 bit Samsung Curved 27" S27D590C 
KeyboardPowerCaseMouse
Corsair Strafe RGB Apevia Iceburg 680 watts Apevia X-Sniper 2 EVGA Torq X3 Laser 
CPUMotherboardGraphicsRAM
AMD Phenom 9750 ASUS M3A78-CM PNY XLR8 GTX 460 Corsair XMS2 (4 x 1GB) 
Hard DriveCoolingCoolingPower
Hitachi 5K500 Silenx 92mm EFFIZIO Corsair SP 120 Red LED Antec 500watt 
CPUMotherboardGraphicsRAM
Intel Core i5-6400 Skylake ASRock A170A-X1/3.1 Gigabye G1 Gaming GTX 970 Windforce CORSAIR Vengeance LPX 16GB (4 x 4GB) 288-Pin DD... 
CoolingCoolingCoolingCooling
Bykski CPU-XPR-A High Performance Acrylic Nicke... EKWB Acrylic Nickel GPU Block Monsoon MMRS Reservoir Bykski BY-PUMP-XPH-PA Water Cooling Pump 
CoolingCoolingCoolingCooling
Koolance 240 30 FPI Radiator Magicool 280 14 FPI Radiator Bitfenix Spectre PWM 120mm Fan ML140 140mm PWM Premium Magnetic Levitation Fan 
OSPowerCase
Windows 10 Pro Corsair RM Series 850 Thermaltake Suppressor F31 
  hide details  
Reply
 
Spare Parts
(8 items)
 
 
CPUMotherboardGraphicsRAM
intel i5 750 Lynnfield Gigabyte GA-P55-USB3 ASUS Strix GTX 960 G.SKILL Ripjaws X Series 16GB (2 x 8GB) 240-Pin... 
Hard DriveCoolingCoolingCooling
Crucial BX100 SSD 500GB EKWB EK-KIT L120 Corsair SP120 Koolance 2x140mm Radiator HX-CU1402V 
CoolingCoolingOSMonitor
Corsair AF140 Bitspower VG-NGTX960 Windows 7 Ultimate 64 bit Samsung Curved 27" S27D590C 
KeyboardPowerCaseMouse
Corsair Strafe RGB Apevia Iceburg 680 watts Apevia X-Sniper 2 EVGA Torq X3 Laser 
CPUMotherboardGraphicsRAM
AMD Phenom 9750 ASUS M3A78-CM PNY XLR8 GTX 460 Corsair XMS2 (4 x 1GB) 
Hard DriveCoolingCoolingPower
Hitachi 5K500 Silenx 92mm EFFIZIO Corsair SP 120 Red LED Antec 500watt 
CPUMotherboardGraphicsRAM
Intel Core i5-6400 Skylake ASRock A170A-X1/3.1 Gigabye G1 Gaming GTX 970 Windforce CORSAIR Vengeance LPX 16GB (4 x 4GB) 288-Pin DD... 
CoolingCoolingCoolingCooling
Bykski CPU-XPR-A High Performance Acrylic Nicke... EKWB Acrylic Nickel GPU Block Monsoon MMRS Reservoir Bykski BY-PUMP-XPH-PA Water Cooling Pump 
CoolingCoolingCoolingCooling
Koolance 240 30 FPI Radiator Magicool 280 14 FPI Radiator Bitfenix Spectre PWM 120mm Fan ML140 140mm PWM Premium Magnetic Levitation Fan 
OSPowerCase
Windows 10 Pro Corsair RM Series 850 Thermaltake Suppressor F31 
  hide details  
Reply
post #6 of 14
Thread Starter 
i have tired tilting the case it hasn't helped. but if there is air trapped its hard to say where it is.
post #7 of 14
Thread Starter 
Quote:
Originally Posted by Radnad View Post

Why do you think it's not circulating? OH, and you have the CPU block connected wrong technically, the inlet is the most center port and the outlet port is the most outer port, so they tubing should be swapped from the way you have it. Now this shouldn't cause a flow problem but it will cause a slightly higher temp by a few degrees.

the problem is theres only coolant going to one of the tubes to the cpu block. and not to the rest of the loop
post #8 of 14
Quote:
Originally Posted by zipo244 View Post

Warning: Spoiler! (Click to show)

Pump is connected through molex back of the psu

You're going from the pump/res to the "outlet" of the cpu block instead of the "inlet". This cause restriction which doesn't help bleeding your loop. You'll have to switch your connections on the CPU block and retry.

I'm pretty sure it will go better.

Also, do you feel vibrations coming from the pump?
Silent Watcher
(9 items)
 
Eclipse
(7 items)
 
Lady Sif
(6 items)
 
CPUMotherboardGraphicsGraphics
Intel I7-6800K Asus Rampage V Edition X99 Asus GTX 1070 STRIX-GTX1070-O8G-GAMING Asus GTX 1070 STRIX-GTX1070-O8G-GAMING 
RAMCoolingOSPower
G.SKILL TridentZ 32GB (8 x 4GB) DDR4-3200 EK Custom Dual Loop Windows 10 Home Corsair AX860i 860W 80PLUS Platinum 
Case
be quiet! Dark Base Pro 900 Black 
CPUMotherboardGraphicsGraphics
i7-6700K Gigabyte Z170X-SOC Force Gigabyte GTX 980 Ti G1 Gaming Gigabyte GTX 980 Ti G1 Gaming 
RAMPowerCase
Corsair Dominator Platinum 16GB (4 x 4GB) DDR4-... EVGA SuperNOVA P2 1200w Parvum L1.0 
CPUMotherboardGraphicsRAM
i7 4790K EVGA Z97 Stinger WiFi EVGA GTX 980 Superclock G. Skill Ripjaws Z 8Gb DDR3-2400 
Hard DriveCase
SAMSUNG 850 EVO 120GB SSD EK-Vulture 
  hide details  
Reply
Silent Watcher
(9 items)
 
Eclipse
(7 items)
 
Lady Sif
(6 items)
 
CPUMotherboardGraphicsGraphics
Intel I7-6800K Asus Rampage V Edition X99 Asus GTX 1070 STRIX-GTX1070-O8G-GAMING Asus GTX 1070 STRIX-GTX1070-O8G-GAMING 
RAMCoolingOSPower
G.SKILL TridentZ 32GB (8 x 4GB) DDR4-3200 EK Custom Dual Loop Windows 10 Home Corsair AX860i 860W 80PLUS Platinum 
Case
be quiet! Dark Base Pro 900 Black 
CPUMotherboardGraphicsGraphics
i7-6700K Gigabyte Z170X-SOC Force Gigabyte GTX 980 Ti G1 Gaming Gigabyte GTX 980 Ti G1 Gaming 
RAMPowerCase
Corsair Dominator Platinum 16GB (4 x 4GB) DDR4-... EVGA SuperNOVA P2 1200w Parvum L1.0 
CPUMotherboardGraphicsRAM
i7 4790K EVGA Z97 Stinger WiFi EVGA GTX 980 Superclock G. Skill Ripjaws Z 8Gb DDR3-2400 
Hard DriveCase
SAMSUNG 850 EVO 120GB SSD EK-Vulture 
  hide details  
Reply
post #9 of 14
Thread Starter 
Quote:
Originally Posted by akira749 View Post

You're going from the pump/res to the "outlet" of the cpu block instead of the "inlet". This cause restriction which doesn't help bleeding your loop. You'll have to switch your connections on the CPU block and retry.

I'm pretty sure it will go better.

Also, do you feel vibrations coming from the pump?

yes there is vibrations coming from the pump. i also changed the outlet to the inlet on the cpu block but im still get the same result which makes me think it could be the rad or pump.
Edited by zipo244 - 10/6/16 at 5:53am
post #10 of 14
Quote:
Originally Posted by zipo244 View Post

yes there is vibrations coming from the pump. i also changed the outlet to the inlet on the cpu block but im still get the same result which makes me think it could be the rad or pump.

And is the pump audible? If you can hear it somewhat loudely, it's probably an air pocket somewhere. Sometimes they are hard to dislodge.
Silent Watcher
(9 items)
 
Eclipse
(7 items)
 
Lady Sif
(6 items)
 
CPUMotherboardGraphicsGraphics
Intel I7-6800K Asus Rampage V Edition X99 Asus GTX 1070 STRIX-GTX1070-O8G-GAMING Asus GTX 1070 STRIX-GTX1070-O8G-GAMING 
RAMCoolingOSPower
G.SKILL TridentZ 32GB (8 x 4GB) DDR4-3200 EK Custom Dual Loop Windows 10 Home Corsair AX860i 860W 80PLUS Platinum 
Case
be quiet! Dark Base Pro 900 Black 
CPUMotherboardGraphicsGraphics
i7-6700K Gigabyte Z170X-SOC Force Gigabyte GTX 980 Ti G1 Gaming Gigabyte GTX 980 Ti G1 Gaming 
RAMPowerCase
Corsair Dominator Platinum 16GB (4 x 4GB) DDR4-... EVGA SuperNOVA P2 1200w Parvum L1.0 
CPUMotherboardGraphicsRAM
i7 4790K EVGA Z97 Stinger WiFi EVGA GTX 980 Superclock G. Skill Ripjaws Z 8Gb DDR3-2400 
Hard DriveCase
SAMSUNG 850 EVO 120GB SSD EK-Vulture 
  hide details  
Reply
Silent Watcher
(9 items)
 
Eclipse
(7 items)
 
Lady Sif
(6 items)
 
CPUMotherboardGraphicsGraphics
Intel I7-6800K Asus Rampage V Edition X99 Asus GTX 1070 STRIX-GTX1070-O8G-GAMING Asus GTX 1070 STRIX-GTX1070-O8G-GAMING 
RAMCoolingOSPower
G.SKILL TridentZ 32GB (8 x 4GB) DDR4-3200 EK Custom Dual Loop Windows 10 Home Corsair AX860i 860W 80PLUS Platinum 
Case
be quiet! Dark Base Pro 900 Black 
CPUMotherboardGraphicsGraphics
i7-6700K Gigabyte Z170X-SOC Force Gigabyte GTX 980 Ti G1 Gaming Gigabyte GTX 980 Ti G1 Gaming 
RAMPowerCase
Corsair Dominator Platinum 16GB (4 x 4GB) DDR4-... EVGA SuperNOVA P2 1200w Parvum L1.0 
CPUMotherboardGraphicsRAM
i7 4790K EVGA Z97 Stinger WiFi EVGA GTX 980 Superclock G. Skill Ripjaws Z 8Gb DDR3-2400 
Hard DriveCase
SAMSUNG 850 EVO 120GB SSD EK-Vulture 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: EK Water Blocks
Overclock.net › Forums › Manufacturer Forums › EK Water Blocks › d5 pwm problem