Overclock.net › Forums › Cooling › Water Cooling › Radiator placement question
New Posts  All Forums:Forum Nav:

Radiator placement question

post #1 of 4
Thread Starter 
Currently I planned on using 2 XSPC Raystorm rads (360s) recently I bought a caselabs pedestal to go with my build. My dilemma is should I run the 2 rads in the pedestal and just run through the CPU/GPU in the upper portion and dump into the reservoir? Will this provided sufficient cooling before it passes through the GPU -> CPU back into the res?
post #2 of 4
Thread Starter 
I guess I should clarify my other idea.

Go from pump -> rad in pedestal -> GPU -> CPU -> RAD -> back into res.
post #3 of 4
Temperatures in a loop equalize over many passes. Do whatever looks best but keep the res before the pump to make your life easier.
post #4 of 4
Thread Starter 
Okay, so my idea would probably work then.

So it would be pump/res combo -> rad (1,2) -> GPU -> CPU -> back to res

Using the bitspower d5 with the swiftech pump combo.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Radiator placement question