Overclock.net › Forums › Intel › Intel CPUs › Kaby Lake Overclocking Guide [With Statistics]
New Posts  All Forums:Forum Nav:

Kaby Lake Overclocking Guide [With Statistics] - Page 189

post #1881 of 2897
Quote:
Originally Posted by D13mass View Post

Finally I bought 7700k, for 4800Mhz I need setup 1.32V and max temps during gaming 75 °C and think it`s not bad result, but for 4900Mhz I tried to give 1.40V and it was unstable mad.gif

Do u use LLC for vdroop control?
post #1882 of 2897
Quote:
Originally Posted by patman-dk View Post

Do u use LLC for vdroop control?
No, my MSI motherboard doesn`t have these settings, so I use 'Override' mode for setup voltage and put manually 1.32V and I turned off Compensation settings because it increases voltage in idle mode.
post #1883 of 2897
Quote:
Originally Posted by D13mass View Post

Finally I bought 7700k, for 4800Mhz I need setup 1.32V and max temps during gaming 75 °C and think it`s not bad result, but for 4900Mhz I tried to give 1.40V and it was unstable mad.gif

Set pll oc voltage to 1.100 you will get a drop in temps and you will be able to get higher clocks.

I run 1.100 on it and it's perfectly fine. With my cooling setup , i get 38-42 c temps in gaming , 60c on stress testing, water temps about 32-35c.
post #1884 of 2897
Quote:
Originally Posted by D13mass View Post

No, my MSI motherboard doesn`t have these settings, so I use 'Override' mode for setup voltage and put manually 1.32V and I turned off Compensation settings because it increases voltage in idle mode.
I use adaptive, never tried override on that board( how will it defer?) what kind of compensation setting you are talking about? You mean llc settings?
Thx
post #1885 of 2897
Quote:
Originally Posted by MaKeN View Post

I use adaptive, never tried override on that board( how will it defer?) what kind of compensation setting you are talking about? You mean llc settings?
Thx
No, I mean this one (it`s old my screenshot) "CPU Core Volyage COmpensation"
post #1886 of 2897
Quote:
Originally Posted by MaKeN View Post

Set pll oc voltage to 1.100 you will get a drop in temps and you will be able to get higher clocks.

I run 1.100 on it and it's perfectly fine. With my cooling setup , i get 38-42 c temps in gaming , 60c on stress testing, water temps about 32-35c.
Could you explain what does it mean ? I don`t see these settings on my MB .

Sorry, my fault, I found, it`s record#6 from my screen, so setup it to 1.100 and don`t touch another settings except core voltage ?
Edited by D13mass - 4/15/17 at 10:12am
post #1887 of 2897
Quote:
Originally Posted by D13mass View Post

Could you explain what does it mean ? I don`t see these settings on my MB .




Sorry, my fault, I found, it`s record#6 from my screen, so setup it to 1.100 and don`t touch another settings except core voltage ?

Take a look in the screen shot you posted. I can see Cpu Pll voltage set to auto. Make it be 1.100( on z270 boards it would simply decreasy in an insane amount the temps)


How you turn off the compensation? Set it on auto ?

On msi z170 you have a setting for llc ... but its limited , it would just do one option llc mode 1 or something as i remember from previous msi z170 board.
Edited by MaKeN - 4/15/17 at 12:01pm
post #1888 of 2897
Quote:
Originally Posted by MaKeN View Post

Take a look in the screen shot you posted. I can see Cpu Pll voltage set to auto. Make it be 1.100( on z270 boards it would simply decreasy in an insane amount the temps)


How you turn off the compensation? Set it on auto ?

On msi z170 you have a setting for llc ... but its limited , it would just do one option llc mode 1 or something as i remember from previous msi z170 board.
I don`t have LLC settings.

Right now what I have setup


post #1889 of 2897
Quote:
Originally Posted by D13mass View Post

I don`t have LLC settings.

Right now what I have setup


Did temps drop after changing pll voltage?

As i just searched in google the z170 m5 wont have llc option, only m3 nad m7 would have it. Try to update to latest bios and see if they apear.... other than that idkn...
post #1890 of 2897
Quote:
Originally Posted by MaKeN View Post

Did temps drop after changing pll voltage?

As i just searched in google the z170 m5 wont have llc option, only m3 nad m7 would have it. Try to update to latest bios and see if they apear.... other than that idkn...
I have latest bios version. redface.gif Temps yes, little bit smaller.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Kaby Lake Overclocking Guide [With Statistics]