What's up OCN,
I started this build out as something I was putting together for my kids so we can game together. After purchasing the parvum case and buying the first bit of hardware I started realizing that their rig was starting to turn out to have better parts than mine. So I decided that I would kick them down my current rig minus the two 980ti's that I have in it and take the new build for myself. (Father of the year)
My last build was my first time doing liquid cooling so I had a learning curve that I had go through. Now I have a better understanding of it should have a much easier go at it. (I'll still have to learn to sleeve wires)
I decided to go with borosilicate glass tubing because that's what I do for a living I'm a borosilicate lampworker and seen that people are using in their builds and was like here's something I can do. I had a really hard time bending acrylic on my last build and opted out and took the fitting route after I failed A lot. With boro this is not the case I use 12mm tubing everyday and I can bend it like it's my job (pun intended). I did some practice bends last night and I had no problem getting a perfect 90 with out a form just by eye and hand. I'll be building a form this weekend so all my bends will be exactly the same.
So here's my parts list I have a good amount of the parts already more in route and i should have everything in by the end of the month except the parvum case not sure how long that's going to take. I plan on polishing every bit of acrylic that's going in here It's going to be long and tedious but worth it in the end. I also plan on painting the fan blades and sleeving my own wires this time.
Case - Parvum r1.0 Matx Black, Orange, and White. "Ordered"
CPU - Intel i7 7700k 5ghz (binned from silicon lottery) "Have"
MB - Asus Maximus VIII Gene "Have"
GPU - 2x EVGA GTX 980ti SC "Have"
RAM - Gskill TridentZ 16gb DDR4 3200 "Have"
PSU - EVGA Supernova 1000 p2 "Have"
SSD - 1x Samsung 960 pro m.2 512gb, 1x Samsung 850 pro 512gb "Ordered"
CPU - EK M8G Monoblock "Have"
GPU - 2x EK-FC Titan X/GTX980 Ti Waterblock - Nickel (Original CSQ) "Have"
Gpu Link - 2x EK-FC Bridge SINGLE CSQ "Have"
Rads - 2x Black Ice Nemesis 360GTS® XFLOW "Have"
Tubing - Borosilicate glass 12mm x 1mm "Have"
Fittings - Bitspower "Ordered"
Res/Pump - EK-XRES 140 Revo D5 PWM "Ordered"
Fans - 6x EK-Vardar F4-120 "Ordered"
For your viewing pleasure (Still figuring out the light booth)
Thanks for looking much love
Edited by lever2stacks - Yesterday at 6:46 am