post #1 of 1
Thread Starter 
I currently have two 3 TB HDDs that I would like to put in a RAID 1 configuration. I would like for Windows and Linux to read and write to this array. I believe this means I need to implement BIOS software RAID, aka FakeRAID; if not, please point me in the right direction. The motherboard is capable of making RAIDs using the AMD SB950 South Bridge chipset or the Marvell 88SE9172 chipset. I have not been able make Linux see the raid 1 configuration, however Windows has been able to when using SB950. Neither operating systems could see the Marvell RAID 1. The operating systems will not be installed on these HDDs. Two other SSDs are being used for the operating systems.

Thanks