What is everyone seeing for temps with water? I have dual d5s set on speed 2, an rs360, monsta 240mm both with push pull sp120 hp on 5v, ek supremacy evo, and ek nickel/plexi titan xp block. 4770k is at 4.4 at 1.325v. 1080ti is stock voltage +160 core, +400mem. Before I added the gpu I would hit about 72c on the cpu, now with the gpu under water, I hit 83 on the cpu and 56 on gpu after 1 conquest round in bf1. Should be plenty of rad I would think, but it seems way too hot.
The GPU is simply heating the water up and effecting the CPU temps. Try turning the D5 up to a higher setting and turn your fans up higher. I have three UT60 x 360 rads and all I have is a 6800K and 1080ti and if I leave my fans all the way down, temps will creep up. The GPU simply dumps a fat load of heat. CPU hits upper 50's to lower 60's and GPU hits low to mid 40's.
If you hit 56 on your GPU then your loop is starting to get loaded and can't dump the heat fast enough IMO.
Edited by moonbogg - 3/18/17 at 7:40pm