Originally Posted by FuriousReload
I have a FE with a Hybrid cooler on it, I can run 2126 MHz on 1.081 for 30 minutes on both heaven and valley, I cant get the card to stay at 1.093 long because of the power limitation, for the time I can stay in 1.093 I run 2151 MHz, would the shunt mod help keep me in the 1.093 bracket? I tried the ASUS bios, but flashed back after that didn't help and I had some issues with it even running 2126 MHz on 1.081. My temps stay under 49C during these runs with the hybrid cooler and Kryonaut on the chip. Memory is at +500.
Link to my TimeSpy run with these settings: http://www.3dmark.com/spy/1546540
bruh. That's a monster. What temp delta gain with the Kyro? I have always seen 4-8c gains.
Originally Posted by TheParisHeaton
Hi. Thinking about replacing 2x 980T for 1080ti. I've resolved but I do not know what card to buy it.
My favorites are - Aorus Xtreme or FE. Fe is cheaper for 100 €. I have 2x 480 60mm rads and also i plan to buy EK-FC with card.
I do not know what differences reach these versions without changing the voltage. Any thoughts / advice? Thanks.
how OCD are you? Will it bother you if you cant keep a certain clock or do you just want to know you have a strong OC/card? B/c if it's going to bother you, you will be power limited with t he FE at times and not with the Aorus. However, said power limiting (while being quite bothersome to the ole OCD) only amounts to a ~0.5% - 2% difference AT MOST in actual performance.
Originally Posted by gingerbreadman
I don't know if I got a bad card or what?
I keep crashing even at 1987 @ 1.093V
I'm only stable at 1974
start with NO VOLTS ADDED. I crash all day at 2020 with volts but can hold 2050+ even after the first few temp bins drop with NO volts added.
**Somebody throw up a 1080p medium preset SuPo bench, please. Im curious if the ole 5775c cache works in this bench at 1080p.Edited by Slackaveli - 4/12/17 at 11:26am