Overclock.net › Forums › Case Mods & Cases › Sponsored Builds & Case Mods › [Sponsored]Project Honor[Complete]
New Posts  All Forums:Forum Nav:

[Sponsored]Project Honor[Complete]

post #1 of 22
Thread Starter 
Hi,This is my second case mod
Link for first mod:http://www.overclock.net/t/1619098/case-mods-first-time-mod-project-sinanju#post_25729818

For this time i try to mod based on For Honor Games

Before That i would really like to thank you to all those sponsor and trust for my case mod and first sponsored project


Thermaltake = http://www.thermaltakeusa.com/
ADATA =http://www.adata.com
XPG From ADATA =http://www.xpg.com/en/




Here the Spec For This Case Mod

Thermaltake:
Core X71




P1 Pacific Black Pump


Pacific Flow Indicator


R240 Radiator


Pacific W3 Water Block


Pacific V-GTX10 Series


TT Sleeve Mod Cable Pack


Commander F6 RGB


Toughpower Grand RGB Series 750


TT PREMIUM FAN 3 PACK RGB


V Tubler PETG TUBE 16mm


Thermaltake Bending KIt


Thermaltake Yellow And Black Coolant


Some TT Fitting 90 Degree Dual OD,Compression Fitting,Angle Fitting,And Extender



From Adata
XPG Z1 DDR4 3000MHZ 16GB KIT


SU800 AND XPG930 SSD



Other parts
Intel Core i7 7700K

For Motherboard still in process to find a sponsor


Design

i've never been good for 3d such as sketchup or anything like that so i can only my design by my work in real life

Thanks
Edited by WanV - 3/5/17 at 10:20pm
post #2 of 22
Thread Starter 
measuring motherboard tray with legendary p45 board


need to dissamble and rebuild full front panel

Edited by WanV - 3/16/17 at 8:58am
post #3 of 22
Thread Starter 
Some Tools For Spraying My project


post #4 of 22
Thread Starter 
nul
Edited by WanV - 3/21/17 at 5:29am
post #5 of 22
Thread Starter 
measuring bottom panel still thinking want to full custom or mod original panel



measuring reservoir this 22cm reservoir look small inside core x71

post #6 of 22
Thread Starter 
Front Panel part which i cut with laser cut machine
yCqEaYt.jpg
aCbteQK.jpg
mkrAO0r.jpg

Done cut with laser and now assembly some part to see which 1 missing

h20IiyB.jpg
1rVbzxu.jpg
hkaXUFj.jpg

top panel which i trace with laser and need to remove 1 by 1 before spray
hRQiLVG.jpg
CFVAef2.jpg
Edited by WanV - 3/21/17 at 5:29am
post #7 of 22
Thread Starter 
remove all standard fan which came with x71


front panel switch button,its easy to remove only 2 screw used to mount it


cutting front panel because i will fully custom with it only need the frame only
post #8 of 22
Thread Starter 
sanding frame and side panel with orbital sanding 320grit
.

wet sanding with 800 grit to get smoother finish


using tack cloth to remove all dust,oil



post #9 of 22
Thread Starter 
ready my acrylic part




my spray gear and paint


using alloy red paint
post #10 of 22
Thread Starter 
undercoat silver to get the colour right
xdo7zLG.jpg

thinning the paint to 2:1 ratio with thinner
o246uZG.jpg

Undercoat Process for all part
DqrCogL.jpg

Frame
R3shIzj.jpg
xfbAvMo.jpg
iJTReHN.jpg
LYpFiaF.jpg

Side Panel 1
TRB1fjm.jpg
DqrCogL.jpg

Bottom Panel/Rad Panel
4UTwC8d.jpg

Pcie Slot
SuqNOTJ.jpg
vZWcHu1.jpg
3D1yCjC.jpg

Front Panel Acrylic
3Jewzc3.jpg
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Sponsored Builds & Case Mods
Overclock.net › Forums › Case Mods & Cases › Sponsored Builds & Case Mods › [Sponsored]Project Honor[Complete]