Overclock.net › Forums › AMD › AMD Motherboards › ROG Crosshair VI overclocking thread
New Posts  All Forums:Forum Nav:

ROG Crosshair VI overclocking thread - Page 1330

post #13291 of 16852
Quote:
Originally Posted by FloppyDrive View Post

Look for what other people have done with your RAM. You may need to loosen the timings and increase the vSOC a little. Check the spreadsheet on the first page, also check
http://rymem.vraith.com/detailed_ram/715

Thank you for that info. I can clearly see people have hit 3200 with my memory. Maybe you can also help me figure out how to set my timings to 16-18-18-36-75? I am assuming that there is someplace other than the 5 provided timing slots in the bios to enter the 75 value?
Quote:
Originally Posted by bluej511 View Post

0083 is a 2T that tends to help with people who cant reach 3200mhz, i can do it on hynix with 1t so you should be able to do it on 1107 with ease.

So it appears that we have the same Corsair ram and you are hitting 3200Mhz if I am following along correctly. I tried everything suggested prior and I cannot get my system to boot past 2966.. Not that it's life or death but I really want to get it working and cannot seem to figure it out? Any suggestions or help would be greatly appreciated.
post #13292 of 16852
Quote:
Originally Posted by papabliss View Post

Thank you for that info. I can clearly see people have hit 3200 with my memory. Maybe you can also help me figure out how to set my timings to 16-18-18-36-75? I am assuming that there is someplace other than the 5 provided timing slots in the bios to enter the 75 value?
So it appears that we have the same Corsair ram and you are hitting 3200Mhz if I am following along correctly. I tried everything suggested prior and I cannot get my system to boot past 2966.. Not that it's life or death but I really want to get it working and cannot seem to figure it out? Any suggestions or help would be greatly appreciated.
Quote:
Originally Posted by Johan45 View Post


The only way to modify the sub-timings is by using a lower divider such as 2666 and raising the memory speed by BCLK as you can see by the trc of 57 in this shot. I started from the 2400 Divider, 2666 divider it would be 63

Steel's Machine
(9 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 1700X ASUS Crosshair VI Hero Palit GTX 1070 Super JetStream 2x8 G.Skill Flare X (F4-3200C14D-16GFX) 
Hard DriveCoolingOSPower
Samsung 850 Evo (250GB) Noctua NH-D15 SE-AM4 Windows 10 (Creator's Update) be quiet! Dark Power Pro 10 (550W) 
Case
Cougar PanzerMAX 
  hide details  
Reply
Steel's Machine
(9 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 1700X ASUS Crosshair VI Hero Palit GTX 1070 Super JetStream 2x8 G.Skill Flare X (F4-3200C14D-16GFX) 
Hard DriveCoolingOSPower
Samsung 850 Evo (250GB) Noctua NH-D15 SE-AM4 Windows 10 (Creator's Update) be quiet! Dark Power Pro 10 (550W) 
Case
Cougar PanzerMAX 
  hide details  
Reply
post #13293 of 16852
Quote:
Originally Posted by papabliss View Post

Thank you for that info. I can clearly see people have hit 3200 with my memory. Maybe you can also help me figure out how to set my timings to 16-18-18-36-75? I am assuming that there is someplace other than the 5 provided timing slots in the bios to enter the 75 value?
So it appears that we have the same Corsair ram and you are hitting 3200Mhz if I am following along correctly. I tried everything suggested prior and I cannot get my system to boot past 2966.. Not that it's life or death but I really want to get it working and cannot seem to figure it out? Any suggestions or help would be greatly appreciated.

As Johan explained, if it can't be hit with straps you can always try doing it with bclk overclocking. I wasn't able to do it at all until i switched to 1107 then its been no problem. I have everything set manually, i'm using 1.45v dram boot but i really dont think it makes any difference but you can try that. Robert Hallock from AMD said ram is fine all the way up to 1.5v safely.
    
CPUMotherboardGraphicsRAM
R7 1700X asus crosshair 6 Sapphire R9 390 Nitro CMK16GX4M2B3200C16 
Hard DriveHard DriveCoolingCooling
Kingston HyperX 3K Seagate ST2000DM006 EKWB Supremacy Evo EK-XRES 100 Revo D5 - Acetal 
CoolingCoolingCoolingCooling
Alphacool GPX r9 390 m01 alphacool xt45 240 Alphacool xt45 360 Alphacool D5 PWM 
OSMonitorKeyboardPower
Windows 10 LG 29UM68 Corsair Strafe Corsair RM1000 
CaseMouseMouse Pad
Thermaltake X5 Corsair M65 Pro RGB Razer Goliathus Speed 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
R7 1700X asus crosshair 6 Sapphire R9 390 Nitro CMK16GX4M2B3200C16 
Hard DriveHard DriveCoolingCooling
Kingston HyperX 3K Seagate ST2000DM006 EKWB Supremacy Evo EK-XRES 100 Revo D5 - Acetal 
CoolingCoolingCoolingCooling
Alphacool GPX r9 390 m01 alphacool xt45 240 Alphacool xt45 360 Alphacool D5 PWM 
OSMonitorKeyboardPower
Windows 10 LG 29UM68 Corsair Strafe Corsair RM1000 
CaseMouseMouse Pad
Thermaltake X5 Corsair M65 Pro RGB Razer Goliathus Speed 
  hide details  
Reply
post #13294 of 16852
Novice OCer here with my first build since my fx8350 build years ago. Got a 1700x/c6h/Noctua-d15 x 2 fans. Got my F4-3600C16D-16GTZ running at 3374 on DOCP 3 with 140.6 bclk at 1.35v at 16-16-16-16-36 on bios 1002, and my cpu at 3.8 at 1.38v. After running Prime95 for about 2 hours this setup seems pretty stable at around 60c under load.

When i try to set my ram to the 3200 at 16-16-16-16-36 and 32 it gives me an 0d code and forces me to reset bios.

I would like to get my ram to the normal 3200 stripe with 100 bclk as i'm worried it may be affecting my m.2 960 evo performance.

How much of a performance loss am I looking at with the bclk over 104?
Secondly, I've been reading about adjust SOC voltage and plan to do some changes tonight to see if I can get the 3200 strap to boot. Any advice would be appreciated on the more advanced settings I can try to get this to boot.

Thanks ahead of time!
post #13295 of 16852
After my H100i V2 glitch yesterday:


the Wraith cooler has gained superpowers:

Edited by Safetytrousers - 5/3/17 at 7:39am
post #13296 of 16852
Quote:
Originally Posted by Steelraven View Post


Thank you very much for the info.. I will give it a try..
post #13297 of 16852
Quote:
Originally Posted by bluej511 View Post

As Johan explained, if it can't be hit with straps you can always try doing it with bclk overclocking. I wasn't able to do it at all until i switched to 1107 then its been no problem. I have everything set manually, i'm using 1.45v dram boot but i really dont think it makes any difference but you can try that. Robert Hallock from AMD said ram is fine all the way up to 1.5v safely.

Thank you for the reply. Are you using Straps with 1107 or BCLK? Either way can you please share your other settings and timings with me?
post #13298 of 16852
Quote:
Originally Posted by Steelraven View Post

You should give it a try perhaps, since 1107 seems to use 1T and i.e. 0083 is 2T command rate.

083 was a no go also. frown.gif
post #13299 of 16852
Quote:
Originally Posted by g3kiganger3 View Post

How much of a performance loss am I looking at with the bclk over 104?

Above 105 refclk or so PCIE should auto to GEN2 because BLCK it's also linked to PCIE, did you try to run a benchmark on your SSD to see how the performance change?
Asgard 02
(20 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 1700 ASUS X370 Crosshair VI Gigabyte GTX 980Ti G1 Gaming HyperX Predator HX433C16PB3K2/16 
Hard DriveHard DriveHard DriveHard Drive
Western Digital RE4 SanDisk Ultra II 480 Samsung 850 PRO WD Caviar Red 4TB 
CoolingCoolingCoolingOS
EK Supremacy Clean CSQ Acetal HWLabs SR-2 480 EK D5 Windows 10 64-bit 
MonitorMonitorKeyboardPower
Dell U2713HM 60hz ASUS MG278 144hz CM Storm Novatouch EVGA SuperNOVA 850 P2 
CaseMouseMouse PadAudio
Thermaltake Core P5 Razer Naga Chroma Artisan Shiden-Kai V-Dac II + Matrix M-Stage 
  hide details  
Reply
Asgard 02
(20 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 1700 ASUS X370 Crosshair VI Gigabyte GTX 980Ti G1 Gaming HyperX Predator HX433C16PB3K2/16 
Hard DriveHard DriveHard DriveHard Drive
Western Digital RE4 SanDisk Ultra II 480 Samsung 850 PRO WD Caviar Red 4TB 
CoolingCoolingCoolingOS
EK Supremacy Clean CSQ Acetal HWLabs SR-2 480 EK D5 Windows 10 64-bit 
MonitorMonitorKeyboardPower
Dell U2713HM 60hz ASUS MG278 144hz CM Storm Novatouch EVGA SuperNOVA 850 P2 
CaseMouseMouse PadAudio
Thermaltake Core P5 Razer Naga Chroma Artisan Shiden-Kai V-Dac II + Matrix M-Stage 
  hide details  
Reply
post #13300 of 16852
Quote:
Originally Posted by Heimdallr View Post

Above 105 refclk or so PCIE should auto to GEN2 because BLCK it's also linked to PCIE, did you try to run a benchmark on your SSD to see how the performance change?

I was actually planning on testing this with Crystal tonight. Was curious if anyone had any first-hand experience with it. Will running the BLCK over 105 possibly harm the m.2 drive?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD Motherboards
Overclock.net › Forums › AMD › AMD Motherboards › ROG Crosshair VI overclocking thread