Overclock.net › Forums › AMD › AMD Motherboards › ROG Crosshair VI overclocking thread
New Posts  All Forums:Forum Nav:

ROG Crosshair VI overclocking thread - Page 744

post #7431 of 17298



Decided it was time to test Liquid Nitrogen on ram. Momentary all-time high ram speeds obtained!
post #7432 of 17298
Thread Starter 
Got some new BIOS so I'll pull the previous ones (obselete). All new BIOSes has the Voltage offset during recovery bug fixed. Would be very nice to get some feedback on which is working best for you guys in terms of DRAM compability.

Test BIOS 0079

Test BIOS with new AGESA 1004a, with a couple of bugfixes. Up to 5% performance increases in specific applications. Also has P-state overclocking working with BCLK increase. If you want to keep C-states, make sure to set Advanced\AMD CBS\Zen Common Options\Global C-state Control = Enabled. There are two new settings under AMD CBS\UMC Common Options\DDR4 Common Options\ you might want to take a look at, Fail_CNT and ProcODT. Fail_CNT decides how many times to retry when DRAM training fails (F9 -> 0d), default is now 1. ProcODT can help improve your DRAM overclocking. There's a setting available also on previous BIOSes under AMD CBS\UMC Common Options\DRAM Memory Mapping named BankGroupSwap. If you have 2x Single-Rank modules you can try setting this to Disabled and you might see some performance boost in certain applications.

Test BIOS 0081

Same as 0079 but has ProcODT default = 53.3 ohm

Test BIOS 0082

Same as 0081 but with a DRAM compability patch for the below part numbers

CMK16GX4M4A2133C13
AHU08GGB13CGT7G
PV416G240C5QK
F4-2400C15Q-32GRR
TCD44G2400C14BK
F4-2666C16Q2-64GRB
AVD4UZ126661504G
BLT8G4D26AFTA.16FAD
IMA41GU6MFR8N-C F0
MD16GK4D4266615AXR
HX430C15PB2K4/16
HX430C15PBK4/32
AX4U3333W4G16-QGZ
GAM4DBLBM2133D15IE041C
TC48G24S817
SP004GBLFU213N02
78.C1GM3.AF10B
F4-3200C16D-8GVKB

MTA4ATF51264AZ-2G6B1
MTA8ATF1G64AZ-2G3B1
MTA16ATF2G64AZ-2G6B1
HMA41GU7AFR8N-TF T0
HMA451U7AFR8N-TF T0
HMA41GU6AFR8N-UH N0
M378A2K43BB1-CTD
M378A1K43BB1-CRC
M378A1G43EB1-CRC

Test BIOS 0083

Same as 0081 but with "2T" DRAM Mode when using above 2666 DRAM Ratio.
Edited by elmor - 4/7/17 at 1:57am
post #7433 of 17298
Quote:
Originally Posted by elmor View Post

New beta BIOS 1101

Still AGESA 1002. A couple of bugfixes, most importantly has the safe mode offset voltage fixed (not staying at previous value any more).

New test BIOS 0079

Test BIOS with new AGESA 1004. Up to 5% performance increases in specific applications. Also has P-state overclocking working with BCLK increase. If you want to keep C-states, make sure to set Advanced\AMD CBS\Zen Common Options\Global C-state Control = Enabled. There are two new settings under AMD CBS\UMC Common Options\DDR4 Common Options\ you might want to take a look at, Fail_CNT and ProcODT. Fail_CNT decides how many times to retry when DRAM training fails (F9 -> 0d), default is now 1. ProcODT can help improve your DRAM overclocking, default value is 53.3 ohm. There's a setting available also on previous BIOSes under AMD CBS\UMC Common Options\DRAM Memory Mapping named BankGroupSwap. If you have 2x Single-Rank modules you can try setting this to Disabled and you might see some performance boost in certain applications.

Been waiting for this biggrin.gif
Baymax
(17 items)
 
FX Trooper 2.0
(16 items)
 
 
CPUMotherboardGraphicsRAM
AMD Ryzen 7 1700x Crosshair VI Hero R9 Fury X TridentZ RGB 
Hard DriveHard DriveHard DriveCooling
240GB HyperX Predator 500GB Samsung 850 Evo 480GB OCZ Trion 150 EK Predator 360 
OSMonitorMonitorKeyboard
Win 10 Pro Samsung U28E850 4k LG 34UM95 Logitech G910 
PowerCaseMouseMouse Pad
Corsair AX1200i Thermaltake Core X9 Logitech G502 Star Citizen Drake Goliath 
Audio
Logitech G933 
CPUMotherboardGraphicsRAM
FX-8370 Asus Crosshair V Formula-Z R9 290x 16GB G.Skill TridentX 2400Mhz 
Hard DriveOptical DriveCoolingOS
Samsung 840 Evo 250GB Samsung External Blu-Ray Burner Fractal Design Kelvin S36 Windows 10 
MonitorKeyboardPowerCase
Whatever Logitech G19 Silverstone ST1200w CM Storm Trooper 
MouseMouse PadAudioAudio
Logitech G502 Star Citizen Drake Goliath Logitech X530 5.1 Logitech G930 7.1 Wireless Headset 
  hide details  
Reply
Baymax
(17 items)
 
FX Trooper 2.0
(16 items)
 
 
CPUMotherboardGraphicsRAM
AMD Ryzen 7 1700x Crosshair VI Hero R9 Fury X TridentZ RGB 
Hard DriveHard DriveHard DriveCooling
240GB HyperX Predator 500GB Samsung 850 Evo 480GB OCZ Trion 150 EK Predator 360 
OSMonitorMonitorKeyboard
Win 10 Pro Samsung U28E850 4k LG 34UM95 Logitech G910 
PowerCaseMouseMouse Pad
Corsair AX1200i Thermaltake Core X9 Logitech G502 Star Citizen Drake Goliath 
Audio
Logitech G933 
CPUMotherboardGraphicsRAM
FX-8370 Asus Crosshair V Formula-Z R9 290x 16GB G.Skill TridentX 2400Mhz 
Hard DriveOptical DriveCoolingOS
Samsung 840 Evo 250GB Samsung External Blu-Ray Burner Fractal Design Kelvin S36 Windows 10 
MonitorKeyboardPowerCase
Whatever Logitech G19 Silverstone ST1200w CM Storm Trooper 
MouseMouse PadAudioAudio
Logitech G502 Star Citizen Drake Goliath Logitech X530 5.1 Logitech G930 7.1 Wireless Headset 
  hide details  
Reply
post #7434 of 17298
Quote:
Originally Posted by elmor View Post

New beta BIOS 1101

Still AGESA 1002. A couple of bugfixes, most importantly has the safe mode offset voltage fixed (not staying at previous value any more).

New test BIOS 0079

Test BIOS with new AGESA 1004. Up to 5% performance increases in specific applications. Also has P-state overclocking working with BCLK increase. If you want to keep C-states, make sure to set Advanced\AMD CBS\Zen Common Options\Global C-state Control = Enabled. There are two new settings under AMD CBS\UMC Common Options\DDR4 Common Options\ you might want to take a look at, Fail_CNT and ProcODT. Fail_CNT decides how many times to retry when DRAM training fails (F9 -> 0d), default is now 1. ProcODT can help improve your DRAM overclocking, default value is 53.3 ohm. There's a setting available also on previous BIOSes under AMD CBS\UMC Common Options\DRAM Memory Mapping named BankGroupSwap. If you have 2x Single-Rank modules you can try setting this to Disabled and you might see some performance boost in certain applications.

P states with BCLK increase drool.gif

Restore bios defaults before flashing correct?
post #7435 of 17298
Quote:
Originally Posted by elmor View Post

New beta BIOS 1101

Still AGESA 1002. A couple of bugfixes, most importantly has the safe mode offset voltage fixed (not staying at previous value any more).

New test BIOS 0079

Test BIOS with new AGESA 1004. Up to 5% performance increases in specific applications. Also has P-state overclocking working with BCLK increase. If you want to keep C-states, make sure to set Advanced\AMD CBS\Zen Common Options\Global C-state Control = Enabled. There are two new settings under AMD CBS\UMC Common Options\DDR4 Common Options\ you might want to take a look at, Fail_CNT and ProcODT. Fail_CNT decides how many times to retry when DRAM training fails (F9 -> 0d), default is now 1. ProcODT can help improve your DRAM overclocking, default value is 53.3 ohm. There's a setting available also on previous BIOSes under AMD CBS\UMC Common Options\DRAM Memory Mapping named BankGroupSwap. If you have 2x Single-Rank modules you can try setting this to Disabled and you might see some performance boost in certain applications.

Would love to see anyone with corsair lpx that couldnt get to 3200mhz give this a try and see if it ends up going from 2933 to 3200 and staying there.
    
CPUMotherboardGraphicsRAM
R7 1700X asus crosshair 6 Sapphire R9 390 Nitro CMK16GX4M2B3200C16 
Hard DriveHard DriveCoolingCooling
Kingston HyperX 3K Seagate ST2000DM006 EKWB Supremacy Evo EK-XRES 100 Revo D5 - Acetal 
CoolingCoolingCoolingCooling
Alphacool GPX r9 390 m01 alphacool xt45 240 Alphacool xt45 360 Alphacool D5 PWM 
OSMonitorKeyboardPower
Windows 10 LG 29UM68 Corsair Strafe Corsair RM1000 
CaseMouseMouse Pad
Thermaltake X5 Corsair M65 Pro RGB Razer Goliathus Speed 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
R7 1700X asus crosshair 6 Sapphire R9 390 Nitro CMK16GX4M2B3200C16 
Hard DriveHard DriveCoolingCooling
Kingston HyperX 3K Seagate ST2000DM006 EKWB Supremacy Evo EK-XRES 100 Revo D5 - Acetal 
CoolingCoolingCoolingCooling
Alphacool GPX r9 390 m01 alphacool xt45 240 Alphacool xt45 360 Alphacool D5 PWM 
OSMonitorKeyboardPower
Windows 10 LG 29UM68 Corsair Strafe Corsair RM1000 
CaseMouseMouse Pad
Thermaltake X5 Corsair M65 Pro RGB Razer Goliathus Speed 
  hide details  
Reply
post #7436 of 17298
Quote:
Originally Posted by elmor View Post

New beta BIOS 1101

Still AGESA 1002. A couple of bugfixes, most importantly has the safe mode offset voltage fixed (not staying at previous value any more).

New test BIOS 0079

Test BIOS with new AGESA 1004a, based on 1101. Up to 5% performance increases in specific applications. Also has P-state overclocking working with BCLK increase. If you want to keep C-states, make sure to set Advanced\AMD CBS\Zen Common Options\Global C-state Control = Enabled. There are two new settings under AMD CBS\UMC Common Options\DDR4 Common Options\ you might want to take a look at, Fail_CNT and ProcODT. Fail_CNT decides how many times to retry when DRAM training fails (F9 -> 0d), default is now 1. ProcODT can help improve your DRAM overclocking, default value is 53.3 ohm. There's a setting available also on previous BIOSes under AMD CBS\UMC Common Options\DRAM Memory Mapping named BankGroupSwap. If you have 2x Single-Rank modules you can try setting this to Disabled and you might see some performance boost in certain applications.

Sounds great! Can we expect any new memory dividers coming down the pike?
post #7437 of 17298
@elmor

Cheers biggrin.gif, gonna go 0079 smile.gif . Hoping new AGESA has SMU FW update wink.gif .
XPS - R7 1700
(14 items)
 
XPS - i5 4690K
(12 items)
 
XPS - Q6600
(8 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 Asus Crosshair VI Hero Sapphire Fury X@1145/545 G.Skill Trident Z 2x 8GB 3200MHz C14 
Hard DriveCoolingCoolingCooling
Samsung Evo 840 ThermalRight Archon IB-E X2 + 2x TY143 ThermalRight TY-143 2x front case intake Arctic Cooling F12 + 2x F9 as rear case exhaust 
OSMonitorKeyboardPower
Win 7 Pro x64 / Win 10 Pro x64 Asus MG279Q Cherry MX-Board 3.0 Cooler Master V850 
CaseMouse
SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
i5 4690K@4.9GHz 1.255V Asus Maximus VII Ranger Sapphire Fury X@1145/545 HyperX Savage 2x8GB 2400MHz C11 
Hard DriveCoolingOSMonitor
Samsung Evo 840 TR Archon SB-E X2 Win 7 Pro x64 / Win 10 x64 Asus MG279Q 
KeyboardPowerCaseMouse
Cherry MX-Board 3.0 Cooler Master V850 SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
Intel Q6600 G0 Asus P5K Premium Black Pearl Sapphire Toxic HD5850 Corsair Dominator 4GB 
Hard DriveCoolingOSPower
Crucial MX 100 256GB TR TRUE Rev.A Win 7 Pro x64 Cooler Master V650 
  hide details  
Reply
XPS - R7 1700
(14 items)
 
XPS - i5 4690K
(12 items)
 
XPS - Q6600
(8 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 Asus Crosshair VI Hero Sapphire Fury X@1145/545 G.Skill Trident Z 2x 8GB 3200MHz C14 
Hard DriveCoolingCoolingCooling
Samsung Evo 840 ThermalRight Archon IB-E X2 + 2x TY143 ThermalRight TY-143 2x front case intake Arctic Cooling F12 + 2x F9 as rear case exhaust 
OSMonitorKeyboardPower
Win 7 Pro x64 / Win 10 Pro x64 Asus MG279Q Cherry MX-Board 3.0 Cooler Master V850 
CaseMouse
SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
i5 4690K@4.9GHz 1.255V Asus Maximus VII Ranger Sapphire Fury X@1145/545 HyperX Savage 2x8GB 2400MHz C11 
Hard DriveCoolingOSMonitor
Samsung Evo 840 TR Archon SB-E X2 Win 7 Pro x64 / Win 10 x64 Asus MG279Q 
KeyboardPowerCaseMouse
Cherry MX-Board 3.0 Cooler Master V850 SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
Intel Q6600 G0 Asus P5K Premium Black Pearl Sapphire Toxic HD5850 Corsair Dominator 4GB 
Hard DriveCoolingOSPower
Crucial MX 100 256GB TR TRUE Rev.A Win 7 Pro x64 Cooler Master V650 
  hide details  
Reply
post #7438 of 17298
Guinea pig #unknown reporting.

The bug where if you change the Vid in Pstate the state will not change persists. Stuck in Pstate 3, 2402 mhz, 109.2 bclk

end report. /reboot
post #7439 of 17298
Certain my boot time increased with 0079, was pretty slow before.
Edited by ShiftyJ - 4/7/17 at 1:15am
post #7440 of 17298
Any way to have the ROG LEDs turn off when the PC is shutdown?
New and Shiny
(18 items)
 
  
CPUMotherboardGraphicsRAM
Rynze 7 1700 ASUS ROG Crosshair VI Hero Sapphire HD7950 G.SKILL TridentZ F4-3200C14D 
Hard DriveHard DriveHard DriveHard Drive
Kingston HyperX 3K Crucial MX300 Western Digital Black Western Digital Green 
Hard DriveCoolingOSMonitor
Western Digital Red Noctua NH-U14S Windows 10 Pro Dell U2414H 
MonitorKeyboardPowerCase
Dell P2414H Ducky One Corsair RM650x NZXT H440 White 
MouseAudio
Logitech G502 Proteus Spectrum Xonar DX 
  hide details  
Reply
New and Shiny
(18 items)
 
  
CPUMotherboardGraphicsRAM
Rynze 7 1700 ASUS ROG Crosshair VI Hero Sapphire HD7950 G.SKILL TridentZ F4-3200C14D 
Hard DriveHard DriveHard DriveHard Drive
Kingston HyperX 3K Crucial MX300 Western Digital Black Western Digital Green 
Hard DriveCoolingOSMonitor
Western Digital Red Noctua NH-U14S Windows 10 Pro Dell U2414H 
MonitorKeyboardPowerCase
Dell P2414H Ducky One Corsair RM650x NZXT H440 White 
MouseAudio
Logitech G502 Proteus Spectrum Xonar DX 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD Motherboards
Overclock.net › Forums › AMD › AMD Motherboards › ROG Crosshair VI overclocking thread