Overclock.net › Forums › AMD › AMD Motherboards › ROG Crosshair VI overclocking thread
New Posts  All Forums:Forum Nav:

ROG Crosshair VI overclocking thread - Page 804

post #8031 of 17206
Quote:
Originally Posted by badhairguy View Post

This is after about 2 minutes of prime 95 blend. *edit* disregard the clock settings shown in bios, it never shows the right clocks in that panel. As a side note (bug?), any time i load an overclock profile, I have to manuall retype the bclk value and hit enter or it doesn't actually change the clocks.


have you tried offset mode for cpu core voltage?
post #8032 of 17206
Quote:
Originally Posted by Frikencio View Post

But don0t know the implications on an NVMe drive. Is it safe?

This is strictly anecdotal, but i've been running my samsung 960 EVO at gen 3 since day 1 and i've had up to 125mhz bclk. No issues as of yet. Drive still reads 100% life. It actually seems to speed it up in benchmarks with increases in bclk biggrin.gif
The Beast
(15 items)
 
  
CPUMotherboardGraphicsGraphics
AMD Ryzen 1700X @ 4GHz (32.25X120.4) ASUS Crosshair VI Hero (0082) MSI Nvidia GeForce GTX 1070 Gaming Edition MSI Nvidia GeForce GTX 1070 Gaming Edition 
RAMHard DriveCoolingOS
G-Skill TridentZ F4-3000C14D-32GTZ @ 3210MHz (2... Samsung 960 EVO NVMe m.2 500GB Corsair H110i Windows 10 64bit 
MonitorKeyboardPowerCase
LG 34uc87 ultrawide 3440x1440 Corsair Strafe Corsair AX760i Platinum Corsair 460X RGB 
Mouse
Logitech G602 
  hide details  
Reply
The Beast
(15 items)
 
  
CPUMotherboardGraphicsGraphics
AMD Ryzen 1700X @ 4GHz (32.25X120.4) ASUS Crosshair VI Hero (0082) MSI Nvidia GeForce GTX 1070 Gaming Edition MSI Nvidia GeForce GTX 1070 Gaming Edition 
RAMHard DriveCoolingOS
G-Skill TridentZ F4-3000C14D-32GTZ @ 3210MHz (2... Samsung 960 EVO NVMe m.2 500GB Corsair H110i Windows 10 64bit 
MonitorKeyboardPowerCase
LG 34uc87 ultrawide 3440x1440 Corsair Strafe Corsair AX760i Platinum Corsair 460X RGB 
Mouse
Logitech G602 
  hide details  
Reply
post #8033 of 17206
Quote:
Originally Posted by Reikoji View Post

so when you set that BLCK, Cpu voltage to offset mode, change the Pstate0 to your desired speed and save + reset, what does it show on the right when you re-enter bios?

Like the previous guy posted with his steps I get everything working and the BCLK is the final change and reboot. Before the BCLK change the freqencies are correct at ~4.0GHz core and ~3400MHz dram. Then after I change the BCLK to 106.4 my freqency goes to 3617MHz (106.4 x 34) and my dram goes to 2269MHz. Very odd.

Quote:
Originally Posted by badhairguy View Post

This is strictly anecdotal, but i've been running my samsung 960 EVO at gen 3 since day 1 and i've had up to 125mhz bclk. No issues as of yet. Drive still reads 100% life. It actually seems to speed it up in benchmarks with increases in bclk biggrin.gif

That's good to know, I'm also running a 960 EVO.
post #8034 of 17206
Quote:
Originally Posted by badhairguy View Post

This is strictly anecdotal, but i've been running my samsung 960 EVO at gen 3 since day 1 and i've had up to 125mhz bclk. No issues as of yet. Drive still reads 100% life. It actually seems to speed it up in benchmarks with increases in bclk biggrin.gif

But is it set to GEN3 ? (PCIe 3.0)
post #8035 of 17206
Quote:
Originally Posted by Reikoji View Post

have you tried offset mode for cpu voltage?

I have not. I don't understand exactly how it works but I'm willing to try. Is there a set offset I need for my voltage requirement? I can run in games all day long at 1.3875v but it will crash in prime95 or aida at the 10 minute mark at anythign less than 1.4v
The Beast
(15 items)
 
  
CPUMotherboardGraphicsGraphics
AMD Ryzen 1700X @ 4GHz (32.25X120.4) ASUS Crosshair VI Hero (0082) MSI Nvidia GeForce GTX 1070 Gaming Edition MSI Nvidia GeForce GTX 1070 Gaming Edition 
RAMHard DriveCoolingOS
G-Skill TridentZ F4-3000C14D-32GTZ @ 3210MHz (2... Samsung 960 EVO NVMe m.2 500GB Corsair H110i Windows 10 64bit 
MonitorKeyboardPowerCase
LG 34uc87 ultrawide 3440x1440 Corsair Strafe Corsair AX760i Platinum Corsair 460X RGB 
Mouse
Logitech G602 
  hide details  
Reply
The Beast
(15 items)
 
  
CPUMotherboardGraphicsGraphics
AMD Ryzen 1700X @ 4GHz (32.25X120.4) ASUS Crosshair VI Hero (0082) MSI Nvidia GeForce GTX 1070 Gaming Edition MSI Nvidia GeForce GTX 1070 Gaming Edition 
RAMHard DriveCoolingOS
G-Skill TridentZ F4-3000C14D-32GTZ @ 3210MHz (2... Samsung 960 EVO NVMe m.2 500GB Corsair H110i Windows 10 64bit 
MonitorKeyboardPowerCase
LG 34uc87 ultrawide 3440x1440 Corsair Strafe Corsair AX760i Platinum Corsair 460X RGB 
Mouse
Logitech G602 
  hide details  
Reply
post #8036 of 17206
Quote:
Originally Posted by badhairguy View Post

This is strictly anecdotal, but i've been running my samsung 960 EVO at gen 3 since day 1 and i've had up to 125mhz bclk. No issues as of yet. Drive still reads 100% life. It actually seems to speed it up in benchmarks with increases in bclk biggrin.gif

And I've had mine up to just over 140 so I wouldnt about that (gen set to auto in BIOS). I didnt bench it to see what it was actually running at but there were no issues.
Inferior FTW!
(22 items)
 
FrankenRyzen
(13 items)
 
 
CPUMotherboardGraphicsRAM
i5 6600K 4.5@1.320v Gigabyte Z170X-Gaming 7 Founder's GTX 1070 200/800 Corsair Vengeance LED 3200@4000 
Hard DriveCoolingCoolingCooling
MyDigitalSSD BPX 120 (RAID 0) EK-FB GA Z170X Monoblock XSPC RX360 (White) XSPC RX240 (White) 
CoolingCoolingCoolingCooling
EK Vardar F2s (x5) EK-FC1070 GTX1070 (nickel/plexi)  EK GTX1070 FE backplate EK Double Bay PWM D5 MX 
CoolingCoolingOSMonitor
Bitspower 250 Z-Multi Res EK HDC fittings (12mm) Windows 10 Samsung C32F391 
KeyboardPowerCaseMouse
Razer Blackwidow Chroma EVGA Supernova G1 1000w Phanteks Enthoo Primo Razer Naga Epic 
Mouse PadAudio
Razer Vespula Sennheiser HD598 
CPUMotherboardGraphicsRAM
Ryzen R7 1700 @3.9 Asus Crosshair VI Hero Radeon HD 6950 G.skill RGB 3200 @3500 C16 
Hard DriveCoolingOSMonitor
Samsung 960 Evo CM 212 Evo (push/pull) Windows 10 Pro 46" Sharp Aquos 
KeyboardPowerCaseMouse
Razer Anansi 750w Keian CM ATCS 840 Logitech G300 
Mouse Pad
My desk... 
  hide details  
Reply
Inferior FTW!
(22 items)
 
FrankenRyzen
(13 items)
 
 
CPUMotherboardGraphicsRAM
i5 6600K 4.5@1.320v Gigabyte Z170X-Gaming 7 Founder's GTX 1070 200/800 Corsair Vengeance LED 3200@4000 
Hard DriveCoolingCoolingCooling
MyDigitalSSD BPX 120 (RAID 0) EK-FB GA Z170X Monoblock XSPC RX360 (White) XSPC RX240 (White) 
CoolingCoolingCoolingCooling
EK Vardar F2s (x5) EK-FC1070 GTX1070 (nickel/plexi)  EK GTX1070 FE backplate EK Double Bay PWM D5 MX 
CoolingCoolingOSMonitor
Bitspower 250 Z-Multi Res EK HDC fittings (12mm) Windows 10 Samsung C32F391 
KeyboardPowerCaseMouse
Razer Blackwidow Chroma EVGA Supernova G1 1000w Phanteks Enthoo Primo Razer Naga Epic 
Mouse PadAudio
Razer Vespula Sennheiser HD598 
CPUMotherboardGraphicsRAM
Ryzen R7 1700 @3.9 Asus Crosshair VI Hero Radeon HD 6950 G.skill RGB 3200 @3500 C16 
Hard DriveCoolingOSMonitor
Samsung 960 Evo CM 212 Evo (push/pull) Windows 10 Pro 46" Sharp Aquos 
KeyboardPowerCaseMouse
Razer Anansi 750w Keian CM ATCS 840 Logitech G300 
Mouse Pad
My desk... 
  hide details  
Reply
post #8037 of 17206
Quote:
Originally Posted by jugs View Post

Like the previous guy posted with his steps I get everything working and the BCLK is the final change and reboot. Before the BCLK change the freqencies are correct at ~4.0GHz core and ~3400MHz dram. Then after I change the BCLK to 106.4 my freqency goes to 3617MHz (106.4 x 34) and my dram goes to 2269MHz. Very odd.

Its because whenever you go back into bios, the Pstate info reverts back to auto instantly (bug). if you go to make any changes in extreme tweaker, go back and set up your Pstate again.
post #8038 of 17206
Quote:
Originally Posted by Frikencio View Post

CPU while stress test vs CPU while encoding bench:


Really? I hit about 129w under realbench haha.
    
CPUMotherboardGraphicsRAM
R7 1700X asus crosshair 6 Sapphire R9 390 Nitro CMK16GX4M2B3200C16 
Hard DriveHard DriveCoolingCooling
Kingston HyperX 3K Seagate ST2000DM006 EKWB Supremacy Evo EK-XRES 100 Revo D5 - Acetal 
CoolingCoolingCoolingCooling
Alphacool GPX r9 390 m01 alphacool xt45 240 Alphacool xt45 360 Alphacool D5 PWM 
OSMonitorKeyboardPower
Windows 10 LG 29UM68 Corsair Strafe Corsair RM1000 
CaseMouseMouse Pad
Thermaltake X5 Corsair M65 Pro RGB Razer Goliathus Speed 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
R7 1700X asus crosshair 6 Sapphire R9 390 Nitro CMK16GX4M2B3200C16 
Hard DriveHard DriveCoolingCooling
Kingston HyperX 3K Seagate ST2000DM006 EKWB Supremacy Evo EK-XRES 100 Revo D5 - Acetal 
CoolingCoolingCoolingCooling
Alphacool GPX r9 390 m01 alphacool xt45 240 Alphacool xt45 360 Alphacool D5 PWM 
OSMonitorKeyboardPower
Windows 10 LG 29UM68 Corsair Strafe Corsair RM1000 
CaseMouseMouse Pad
Thermaltake X5 Corsair M65 Pro RGB Razer Goliathus Speed 
  hide details  
Reply
post #8039 of 17206
Quote:
Originally Posted by Frikencio View Post

But is it set to GEN3 ? (PCIe 3.0)

Yep. m.2 link set to gen3, as well as pci-e 16_1 and 8_2. Im running SLI 1070s, all set to GEN3 manually. Verified in samsungs software and GPU-Z
The Beast
(15 items)
 
  
CPUMotherboardGraphicsGraphics
AMD Ryzen 1700X @ 4GHz (32.25X120.4) ASUS Crosshair VI Hero (0082) MSI Nvidia GeForce GTX 1070 Gaming Edition MSI Nvidia GeForce GTX 1070 Gaming Edition 
RAMHard DriveCoolingOS
G-Skill TridentZ F4-3000C14D-32GTZ @ 3210MHz (2... Samsung 960 EVO NVMe m.2 500GB Corsair H110i Windows 10 64bit 
MonitorKeyboardPowerCase
LG 34uc87 ultrawide 3440x1440 Corsair Strafe Corsair AX760i Platinum Corsair 460X RGB 
Mouse
Logitech G602 
  hide details  
Reply
The Beast
(15 items)
 
  
CPUMotherboardGraphicsGraphics
AMD Ryzen 1700X @ 4GHz (32.25X120.4) ASUS Crosshair VI Hero (0082) MSI Nvidia GeForce GTX 1070 Gaming Edition MSI Nvidia GeForce GTX 1070 Gaming Edition 
RAMHard DriveCoolingOS
G-Skill TridentZ F4-3000C14D-32GTZ @ 3210MHz (2... Samsung 960 EVO NVMe m.2 500GB Corsair H110i Windows 10 64bit 
MonitorKeyboardPowerCase
LG 34uc87 ultrawide 3440x1440 Corsair Strafe Corsair AX760i Platinum Corsair 460X RGB 
Mouse
Logitech G602 
  hide details  
Reply
post #8040 of 17206
Quote:
Originally Posted by bluej511 View Post

Really? I hit about 129w under realbench haha.

In what line?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD Motherboards
Overclock.net › Forums › AMD › AMD Motherboards › ROG Crosshair VI overclocking thread