Overclock.net › Forums › AMD › AMD Motherboards › ROG Crosshair VI overclocking thread
New Posts  All Forums:Forum Nav:

ROG Crosshair VI overclocking thread - Page 809

post #8081 of 17321
Can those with a successfull BCLK / mem oc also share their settings? Especially SoC / DRAM voltage etc. would be interesting smile.gif
main
(10 items)
 
  
Reply
main
(10 items)
 
  
Reply
post #8082 of 17321
Bugger, just had my first ever code 8 frown.gif

CPU at stock, which is worrying.

EDIT: Oh hang on, I lowered the SOC from 1.0v to 0.95v yesterday. Probably that...
Edited by SpecChum - 4/9/17 at 12:14pm
post #8083 of 17321
Quote:
Originally Posted by madweazl View Post

One other thing I'll point out is that my tctl/tdie shows a minimum below ambient by about 2°; my fish tanks controller says ambient is 22.55° and my Intel rig's ambient sensor shows 22.6°.
That is because Tdie always subtracts 20 off Tctl, but the offset is dynamic, not a static +20. Idle the offset is 0, so Tdie displays 20 C too low.

Most of the time there is a +10 offset active at light load, often showing as temp jumping +10 and then decreasing gradually just to jump up again.

I wonder why you Tdie isn't lower, though.
post #8084 of 17321
Quote:
Originally Posted by Timur Born View Post

That is because Tdie always subtracts 20 off Tctl, but the offset is dynamic, not a static +20. Idle the offset is 0, so Tdie displays 20 C too low.

Most of the time there is a +10 offset active at light load, often showing as temp jumping +10 and then decreasing gradually just to jump up again.

I wonder why you Tdie isn't lower, though.

I dont buy that for the 1700 but I know you've done some work on testing things out.
Inferior FTW!
(22 items)
 
FrankenRyzen
(13 items)
 
 
CPUMotherboardGraphicsRAM
i5 6600K 4.5@1.320v Gigabyte Z170X-Gaming 7 Founder's GTX 1070 200/800 Corsair Vengeance LED 3200@4000 
Hard DriveCoolingCoolingCooling
MyDigitalSSD BPX 120 (RAID 0) EK-FB GA Z170X Monoblock XSPC RX360 (White) XSPC RX240 (White) 
CoolingCoolingCoolingCooling
EK Vardar F2s (x5) EK-FC1070 GTX1070 (nickel/plexi)  EK GTX1070 FE backplate EK Double Bay PWM D5 MX 
CoolingCoolingOSMonitor
Bitspower 250 Z-Multi Res EK HDC fittings (12mm) Windows 10 Samsung C32F391 
KeyboardPowerCaseMouse
Razer Blackwidow Chroma EVGA Supernova G1 1000w Phanteks Enthoo Primo Razer Naga Epic 
Mouse PadAudio
Razer Vespula Sennheiser HD598 
CPUMotherboardGraphicsRAM
Ryzen R7 1700 @3.9 Asus Crosshair VI Hero Radeon HD 6950 G.skill RGB 3200 @3500 C16 
Hard DriveCoolingOSMonitor
Samsung 960 Evo CM 212 Evo (push/pull) Windows 10 Pro 46" Sharp Aquos 
KeyboardPowerCaseMouse
Razer Anansi 750w Keian CM ATCS 840 Logitech G300 
Mouse Pad
My desk... 
  hide details  
Reply
Inferior FTW!
(22 items)
 
FrankenRyzen
(13 items)
 
 
CPUMotherboardGraphicsRAM
i5 6600K 4.5@1.320v Gigabyte Z170X-Gaming 7 Founder's GTX 1070 200/800 Corsair Vengeance LED 3200@4000 
Hard DriveCoolingCoolingCooling
MyDigitalSSD BPX 120 (RAID 0) EK-FB GA Z170X Monoblock XSPC RX360 (White) XSPC RX240 (White) 
CoolingCoolingCoolingCooling
EK Vardar F2s (x5) EK-FC1070 GTX1070 (nickel/plexi)  EK GTX1070 FE backplate EK Double Bay PWM D5 MX 
CoolingCoolingOSMonitor
Bitspower 250 Z-Multi Res EK HDC fittings (12mm) Windows 10 Samsung C32F391 
KeyboardPowerCaseMouse
Razer Blackwidow Chroma EVGA Supernova G1 1000w Phanteks Enthoo Primo Razer Naga Epic 
Mouse PadAudio
Razer Vespula Sennheiser HD598 
CPUMotherboardGraphicsRAM
Ryzen R7 1700 @3.9 Asus Crosshair VI Hero Radeon HD 6950 G.skill RGB 3200 @3500 C16 
Hard DriveCoolingOSMonitor
Samsung 960 Evo CM 212 Evo (push/pull) Windows 10 Pro 46" Sharp Aquos 
KeyboardPowerCaseMouse
Razer Anansi 750w Keian CM ATCS 840 Logitech G300 
Mouse Pad
My desk... 
  hide details  
Reply
post #8085 of 17321
Quote:
Originally Posted by Fright View Post

@elmor
Got my 3rd memory kit (GSkill F4-3200C14D-32GTZ) now and it is frustrating. (only does 2666 as stated in your information) I will stay with this kit and 2x16GB. The only thing I want to know is, will the RAM getting fixed with the AGESA update that is coming in May from AMD and is hopefully implemanted in June within the BIOS or will 2x16GB never run @3200 MHz?
The Kit is a Samsung B-die if I'm not mistaken.

Edit: My Ripjaws also got an A500 in their serial number so I guess this doesn't indicate that were samsung b-die used because this kit was CL16 so probably Hynix ICs.

Kind regards,

Fright

Welcome to my world. I've got exactly the same kit. I've been able to make them work at 2933 MHz by loosing the timings to 18-14-14-21-69-1T on 0082 test BIOS and using a value of 68.8 for ProcODT which is located in "AMD CBS -> UMC Common Options -> DD4 Common Options". The rest of my test setup right now is VSOC 0.95v, CPU Vcore Auto, DRAM Voltage 0.35v, Boot DRAM Voltage 1.35v, VTTDDR 0.6798v, LLC default.

I have been unable to achieve booting up at 3200MHz for now. I have tried with higher voltages, loosening the timings beyond 22 and increasing the ProcODT, but it's been impossible. I haven't tried increasing the BCLK frequency, though.

Cheers!
post #8086 of 17321
Quote:
Originally Posted by S1L3N7D3A7H View Post

I'm trying to create the conditions for these pauses. I'm running 100 runs of IBT AVX on High. Haven't noticed anything, no pauses yet, its passed 10 runs ATM. Memory usage 4.9/15.9GB

Edit: Clarify, I am running creators update.

Just finished 100 runs. Didn't notice any hitching or pauses of my cursor.
post #8087 of 17321
Quote:
Originally Posted by badhairguy View Post

Crysis 90. I see he has a 1700X and AIO. Im having idle temp issues and I want to compare.

For daily, I have OC set to 3.85 Ghz all-cores on CPU (1.25 V set manually from BIOS).
These are my operating T°, red with HWiNFO (min e max):



Under Cinebench, it reaches 53 °C.
Cooler is Corsair H110i GTX.
Don't know if those T° are real or not.
post #8088 of 17321
@MNMadman
Quote:
Originally Posted by S1L3N7D3A7H View Post

Just finished 100 runs. Didn't notice any hitching or pauses of my cursor.

Only when I run IBT AVX at Maximum can I get those symptoms of temporary freezes. I will admit, they last quite a bit longer than on the last build of windows 10.
post #8089 of 17321
Quote:
Originally Posted by Crysis90 View Post

For daily, I have OC set to 3.85 Ghz all-cores on CPU (1.25 V set manually from BIOS).
These are my operating T°, red with HWiNFO (min e max):



Under Cinebench, it reaches 53 °C.
Cooler is Corsair H110i GTX.
Don't know if those T° are real or not.

Are you using the tctl offset in BIOS? Still doing ice bucket tests?
post #8090 of 17321
Quote:
Originally Posted by Crysis90 View Post

For daily, I have OC set to 3.85 Ghz all-cores on CPU (1.25 V set manually from BIOS).
These are my operating T°, red with HWiNFO (min e max):



Under Cinebench, it reaches 53 °C.
Cooler is Corsair H110i GTX.
Don't know if those T° are real or not.

Your temps are reading correctly, tdie is with the offset but since your idle is already at 30 then youre fine.
    
CPUMotherboardGraphicsRAM
R7 1700X asus crosshair 6 Sapphire R9 390 Nitro CMK16GX4M2B3200C16 
Hard DriveHard DriveCoolingCooling
Kingston HyperX 3K Seagate ST2000DM006 EKWB Supremacy Evo EK-XRES 100 Revo D5 - Acetal 
CoolingCoolingCoolingCooling
Alphacool GPX r9 390 m01 alphacool xt45 240 Alphacool xt45 360 Alphacool D5 PWM 
OSMonitorKeyboardPower
Windows 10 LG 29UM68 Corsair Strafe Corsair RM1000 
CaseMouseMouse Pad
Thermaltake X5 Corsair M65 Pro RGB Razer Goliathus Speed 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
R7 1700X asus crosshair 6 Sapphire R9 390 Nitro CMK16GX4M2B3200C16 
Hard DriveHard DriveCoolingCooling
Kingston HyperX 3K Seagate ST2000DM006 EKWB Supremacy Evo EK-XRES 100 Revo D5 - Acetal 
CoolingCoolingCoolingCooling
Alphacool GPX r9 390 m01 alphacool xt45 240 Alphacool xt45 360 Alphacool D5 PWM 
OSMonitorKeyboardPower
Windows 10 LG 29UM68 Corsair Strafe Corsair RM1000 
CaseMouseMouse Pad
Thermaltake X5 Corsair M65 Pro RGB Razer Goliathus Speed 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD Motherboards
Overclock.net › Forums › AMD › AMD Motherboards › ROG Crosshair VI overclocking thread