Overclock.net › Forums › AMD › AMD Motherboards › ROG Crosshair VI overclocking thread
New Posts  All Forums:Forum Nav:

ROG Crosshair VI overclocking thread - Page 828

post #8271 of 17328
Quote:
Originally Posted by bluej511 View Post

Its going to depend on every situation.

Around here you're not stable unless you run intelburntest at maximum for a million hours. Ive done all my rigs and customer rigs the same way. 15-30min run of realbench/intelutility (still uses linpack btw) then i will run it all day just on to check for idle/background task stability, in the process ill check for WHEA errors then change offset/voltage accordingly. After all thats done, ill game on it solid for a couple days and run photoshop to edit some raw/jpeg files. Thats my baseline, when i change OC i repeat the process.

My 1700x at 3.8ghz is doing it fine at 1.199v under load, hasn't crashed once, hasn't 8 coded once, ZERO WHEA errors in my final setup so for me in my case its stable.

The people running IBT for 24hrs (and unless your PC is actually maxing out all cores at 100% for 24/7 then yea) all you are doing is slowly degrading your chip. I know musmus will argue with me to the death but i really don't care. Ive been doing it this way for 15years ive never had a customer or my pc have an unstable OC. Then again its also based on usage, if someone is folding then ill run the pc folding for 36hrs and change voltage accordingly. Its all dependent, just like audio and video are.

Amen brotha, sista, or other.

i'm going to aim for better oc's, but to hell with roastin my chip running over demanding stress tests all day. if it can survive 1 or 2 hours of a stress test, any one of them, good to go! and imo a whea error here and there under full load doesnt really bother me. i dont have any games that can put a voltage dropping load on my cpu, and when i run into one im good for llc3.
post #8272 of 17328
Suddenly my board doesn't shutdown properly, it restarts instead. I think i saw this issue here before, can't remember what was the fix mad.gif . This is after 2+ weeks of ok operation.
I'm on bios 1002.
Falx v4.0
(17 items)
 
Falx v3.0
(19 items)
 
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700  Asus Crosshair VI Hero Asus GTX Titan OG G.Skill TridentZ 2x8GB 
Hard DriveCoolingCoolingCooling
Samsung 850 EVO 250GB Alphacool XPX Aquacomputer Kryographics Alphacool NexXxoS XT45 Full Copper 360mm 
CoolingCoolingOSMonitor
Alphacool NexXxoS ST30 Full Copper 240mm  Laing DDC ultra Win 10 x64 DELL 3007WFP 
KeyboardPowerCaseMouse
Logitech G610 MX Red Super Flower Leadex 750W Corsair 400C White Logitech G Pro 
Mouse Pad
Gigabyte GP-MP8000 
  hide details  
Reply
Falx v4.0
(17 items)
 
Falx v3.0
(19 items)
 
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700  Asus Crosshair VI Hero Asus GTX Titan OG G.Skill TridentZ 2x8GB 
Hard DriveCoolingCoolingCooling
Samsung 850 EVO 250GB Alphacool XPX Aquacomputer Kryographics Alphacool NexXxoS XT45 Full Copper 360mm 
CoolingCoolingOSMonitor
Alphacool NexXxoS ST30 Full Copper 240mm  Laing DDC ultra Win 10 x64 DELL 3007WFP 
KeyboardPowerCaseMouse
Logitech G610 MX Red Super Flower Leadex 750W Corsair 400C White Logitech G Pro 
Mouse Pad
Gigabyte GP-MP8000 
  hide details  
Reply
post #8273 of 17328
Quote:
Originally Posted by Frikencio View Post

That is probably true. But at the end, temps will be the same @ 100%. LLC5 will only help if CPU is not at 100% which is great.

Under load, yes, the temps would [likely] be the same. Everywhere else your temps will drop. LLC 5 isnt there for stability, it is there to maintain the voltage you selected and want it to run at, when you need it to.
Inferior FTW!
(22 items)
 
FrankenRyzen
(13 items)
 
 
CPUMotherboardGraphicsRAM
i5 6600K 4.5@1.320v Gigabyte Z170X-Gaming 7 Founder's GTX 1070 200/800 Corsair Vengeance LED 3200@4000 
Hard DriveCoolingCoolingCooling
MyDigitalSSD BPX 120 (RAID 0) EK-FB GA Z170X Monoblock XSPC RX360 (White) XSPC RX240 (White) 
CoolingCoolingCoolingCooling
EK Vardar F2s (x5) EK-FC1070 GTX1070 (nickel/plexi)  EK GTX1070 FE backplate EK Double Bay PWM D5 MX 
CoolingCoolingOSMonitor
Bitspower 250 Z-Multi Res EK HDC fittings (12mm) Windows 10 Samsung C32F391 
KeyboardPowerCaseMouse
Razer Blackwidow Chroma EVGA Supernova G1 1000w Phanteks Enthoo Primo Razer Naga Epic 
Mouse PadAudio
Razer Vespula Sennheiser HD598 
CPUMotherboardGraphicsRAM
Ryzen R7 1700 @3.9 Asus Crosshair VI Hero Radeon HD 6950 G.skill RGB 3200 @3500 C16 
Hard DriveCoolingOSMonitor
Samsung 960 Evo CM 212 Evo (push/pull) Windows 10 Pro 46" Sharp Aquos 
KeyboardPowerCaseMouse
Razer Anansi 750w Keian CM ATCS 840 Logitech G300 
Mouse Pad
My desk... 
  hide details  
Reply
Inferior FTW!
(22 items)
 
FrankenRyzen
(13 items)
 
 
CPUMotherboardGraphicsRAM
i5 6600K 4.5@1.320v Gigabyte Z170X-Gaming 7 Founder's GTX 1070 200/800 Corsair Vengeance LED 3200@4000 
Hard DriveCoolingCoolingCooling
MyDigitalSSD BPX 120 (RAID 0) EK-FB GA Z170X Monoblock XSPC RX360 (White) XSPC RX240 (White) 
CoolingCoolingCoolingCooling
EK Vardar F2s (x5) EK-FC1070 GTX1070 (nickel/plexi)  EK GTX1070 FE backplate EK Double Bay PWM D5 MX 
CoolingCoolingOSMonitor
Bitspower 250 Z-Multi Res EK HDC fittings (12mm) Windows 10 Samsung C32F391 
KeyboardPowerCaseMouse
Razer Blackwidow Chroma EVGA Supernova G1 1000w Phanteks Enthoo Primo Razer Naga Epic 
Mouse PadAudio
Razer Vespula Sennheiser HD598 
CPUMotherboardGraphicsRAM
Ryzen R7 1700 @3.9 Asus Crosshair VI Hero Radeon HD 6950 G.skill RGB 3200 @3500 C16 
Hard DriveCoolingOSMonitor
Samsung 960 Evo CM 212 Evo (push/pull) Windows 10 Pro 46" Sharp Aquos 
KeyboardPowerCaseMouse
Razer Anansi 750w Keian CM ATCS 840 Logitech G300 
Mouse Pad
My desk... 
  hide details  
Reply
post #8274 of 17328
Quote:
Originally Posted by Frikencio View Post

Yup.

with a 1700x? sorry im just wondering why its so high, i dont think i have a good chip compared to some of the guys on here but im at 1.312v at 3.9ghz auto llc so that v is under load, im having trouble going past that tho regardless what voltage im throwing at it
post #8275 of 17328
Quote:
Originally Posted by madweazl View Post

Under load, yes, the temps would [likely] be the same. Everywhere else your temps will drop. LLC 5 isnt there for stability, it is there to maintain the voltage you selected and want it to run at, when you need it to.

well, sometimes that llc is the difference between crash and pass.
post #8276 of 17328
Quote:
Originally Posted by Reikoji View Post

well, sometimes that llc is the difference between crash and pass.

If that is the case, the vcore is too low.
Inferior FTW!
(22 items)
 
FrankenRyzen
(13 items)
 
 
CPUMotherboardGraphicsRAM
i5 6600K 4.5@1.320v Gigabyte Z170X-Gaming 7 Founder's GTX 1070 200/800 Corsair Vengeance LED 3200@4000 
Hard DriveCoolingCoolingCooling
MyDigitalSSD BPX 120 (RAID 0) EK-FB GA Z170X Monoblock XSPC RX360 (White) XSPC RX240 (White) 
CoolingCoolingCoolingCooling
EK Vardar F2s (x5) EK-FC1070 GTX1070 (nickel/plexi)  EK GTX1070 FE backplate EK Double Bay PWM D5 MX 
CoolingCoolingOSMonitor
Bitspower 250 Z-Multi Res EK HDC fittings (12mm) Windows 10 Samsung C32F391 
KeyboardPowerCaseMouse
Razer Blackwidow Chroma EVGA Supernova G1 1000w Phanteks Enthoo Primo Razer Naga Epic 
Mouse PadAudio
Razer Vespula Sennheiser HD598 
CPUMotherboardGraphicsRAM
Ryzen R7 1700 @3.9 Asus Crosshair VI Hero Radeon HD 6950 G.skill RGB 3200 @3500 C16 
Hard DriveCoolingOSMonitor
Samsung 960 Evo CM 212 Evo (push/pull) Windows 10 Pro 46" Sharp Aquos 
KeyboardPowerCaseMouse
Razer Anansi 750w Keian CM ATCS 840 Logitech G300 
Mouse Pad
My desk... 
  hide details  
Reply
Inferior FTW!
(22 items)
 
FrankenRyzen
(13 items)
 
 
CPUMotherboardGraphicsRAM
i5 6600K 4.5@1.320v Gigabyte Z170X-Gaming 7 Founder's GTX 1070 200/800 Corsair Vengeance LED 3200@4000 
Hard DriveCoolingCoolingCooling
MyDigitalSSD BPX 120 (RAID 0) EK-FB GA Z170X Monoblock XSPC RX360 (White) XSPC RX240 (White) 
CoolingCoolingCoolingCooling
EK Vardar F2s (x5) EK-FC1070 GTX1070 (nickel/plexi)  EK GTX1070 FE backplate EK Double Bay PWM D5 MX 
CoolingCoolingOSMonitor
Bitspower 250 Z-Multi Res EK HDC fittings (12mm) Windows 10 Samsung C32F391 
KeyboardPowerCaseMouse
Razer Blackwidow Chroma EVGA Supernova G1 1000w Phanteks Enthoo Primo Razer Naga Epic 
Mouse PadAudio
Razer Vespula Sennheiser HD598 
CPUMotherboardGraphicsRAM
Ryzen R7 1700 @3.9 Asus Crosshair VI Hero Radeon HD 6950 G.skill RGB 3200 @3500 C16 
Hard DriveCoolingOSMonitor
Samsung 960 Evo CM 212 Evo (push/pull) Windows 10 Pro 46" Sharp Aquos 
KeyboardPowerCaseMouse
Razer Anansi 750w Keian CM ATCS 840 Logitech G300 
Mouse Pad
My desk... 
  hide details  
Reply
post #8277 of 17328
Quote:
Originally Posted by madweazl View Post

Under load, yes, the temps would [likely] be the same. Everywhere else your temps will drop. LLC 5 isnt there for stability, it is there to maintain the voltage you selected and want it to run at, when you need it to.

At LLC4 and 1.45v it sits idle at 1.45v and load at 1.45-1.46ish. LLC5 would actually increase it more. My CPU needs 1.460v to be stable 100% CPU. If LLC5 at 1.41V sets the load voltage to 1.46V it will be ok.
post #8278 of 17328
Quote:
Originally Posted by pig666eon View Post

with a 1700x? sorry im just wondering why its so high, i dont think i have a good chip compared to some of the guys on here but im at 1.312v at 3.9ghz auto llc so that v is under load, im having trouble going past that tho regardless what voltage im throwing at it

1700, I must have the ****tiest chip ever made.
Edited by Frikencio - 4/10/17 at 1:48pm
post #8279 of 17328
Not sure who asked, but here are my settings

BIOS 1002
4.1ghz
Multiplier 41, BCLK 100
1.41v vcore, LLC3
1.0 vSOC
1.8v PLL
Memory Frequency DDR 3200
Dram voltage 1.35v
Manual DRAM timings 14-14-14-36
1.4v DRAM Boot
Spread spectrum disabled
Sense MI skew disabled
M.2 link Gen 3
Edited by Gadfly - 4/10/17 at 1:47pm
post #8280 of 17328
Quote:
Originally Posted by Frikencio View Post

At LLC4 and 1.45v it sits idle at 1.45v and load at 1.45-1.46ish. LLC5 would actually increase it more. My CPU needs 1.460v to be stable 100% CPU. If LLC5 at 1.41V sets the load voltage to 1.46V it will be ok.

Impossible for me to say exactly where it would sit but it was a best guess. My point is it wouldnt need to be set to 1.45 24/7; not that I'm concerned with the power usage differences but less voltage is always a good thing if it isnt needed.
Inferior FTW!
(22 items)
 
FrankenRyzen
(13 items)
 
 
CPUMotherboardGraphicsRAM
i5 6600K 4.5@1.320v Gigabyte Z170X-Gaming 7 Founder's GTX 1070 200/800 Corsair Vengeance LED 3200@4000 
Hard DriveCoolingCoolingCooling
MyDigitalSSD BPX 120 (RAID 0) EK-FB GA Z170X Monoblock XSPC RX360 (White) XSPC RX240 (White) 
CoolingCoolingCoolingCooling
EK Vardar F2s (x5) EK-FC1070 GTX1070 (nickel/plexi)  EK GTX1070 FE backplate EK Double Bay PWM D5 MX 
CoolingCoolingOSMonitor
Bitspower 250 Z-Multi Res EK HDC fittings (12mm) Windows 10 Samsung C32F391 
KeyboardPowerCaseMouse
Razer Blackwidow Chroma EVGA Supernova G1 1000w Phanteks Enthoo Primo Razer Naga Epic 
Mouse PadAudio
Razer Vespula Sennheiser HD598 
CPUMotherboardGraphicsRAM
Ryzen R7 1700 @3.9 Asus Crosshair VI Hero Radeon HD 6950 G.skill RGB 3200 @3500 C16 
Hard DriveCoolingOSMonitor
Samsung 960 Evo CM 212 Evo (push/pull) Windows 10 Pro 46" Sharp Aquos 
KeyboardPowerCaseMouse
Razer Anansi 750w Keian CM ATCS 840 Logitech G300 
Mouse Pad
My desk... 
  hide details  
Reply
Inferior FTW!
(22 items)
 
FrankenRyzen
(13 items)
 
 
CPUMotherboardGraphicsRAM
i5 6600K 4.5@1.320v Gigabyte Z170X-Gaming 7 Founder's GTX 1070 200/800 Corsair Vengeance LED 3200@4000 
Hard DriveCoolingCoolingCooling
MyDigitalSSD BPX 120 (RAID 0) EK-FB GA Z170X Monoblock XSPC RX360 (White) XSPC RX240 (White) 
CoolingCoolingCoolingCooling
EK Vardar F2s (x5) EK-FC1070 GTX1070 (nickel/plexi)  EK GTX1070 FE backplate EK Double Bay PWM D5 MX 
CoolingCoolingOSMonitor
Bitspower 250 Z-Multi Res EK HDC fittings (12mm) Windows 10 Samsung C32F391 
KeyboardPowerCaseMouse
Razer Blackwidow Chroma EVGA Supernova G1 1000w Phanteks Enthoo Primo Razer Naga Epic 
Mouse PadAudio
Razer Vespula Sennheiser HD598 
CPUMotherboardGraphicsRAM
Ryzen R7 1700 @3.9 Asus Crosshair VI Hero Radeon HD 6950 G.skill RGB 3200 @3500 C16 
Hard DriveCoolingOSMonitor
Samsung 960 Evo CM 212 Evo (push/pull) Windows 10 Pro 46" Sharp Aquos 
KeyboardPowerCaseMouse
Razer Anansi 750w Keian CM ATCS 840 Logitech G300 
Mouse Pad
My desk... 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD Motherboards
Overclock.net › Forums › AMD › AMD Motherboards › ROG Crosshair VI overclocking thread