ryzen cpu deserve , like as gaming 8 or gaming 9 series mb's but gigabyte only two model have gaming 5 and k7 ( x370 based ) it is not fair when compared intel side mb's
Well, a few days ago I read this post from a Gigabyte employee: "Hey guys, Alan here and I'm a GIGABYTE staff member.
Our inventory stock supposed to pull through this week. Haven't seen it yet, but even afterwards it'll take ~1-3 days to ship out to storefront/e-tailers. Expected limited quantity of our boards until 2 weeks later when we have a gigantic shipment incoming."
Then I just just kept checking Newegg at least once an hour. It was not fun. But then on Wed afternoon, Newegg had them in stock, so I ordered right away. Less than an hour later that were out.
Others have said that Newegg had some available again on Thur., it were out in about 15 mins.
Based on what the Gigabyte employee said (and what happens often with new hardware), they got a small shipment in the US by air, and then they have a "gigantic" shipment coming by boat.
I was fortunate to snag one of the Newegg ones that got flown in. Put the system together yesterday with an 1800X.
Going very well so far. No major issues, the system was left running overnight and it's still running now.
Biggest issue thus far: At least for me, I cannot alter memory speeds with the stock bios. Setting XMP makes it look like it's running my memory at 3200mhz, but according to benchmarking and CPUZ, it doesn't.
I haven't tried any other bios yet.
Edit: It seems that while XMP isn't working (for me), manually typing in the memory frequency, timings, and voltage works.
I didn't realize with the UEFI that you can just type into those fields. My Sandy Bridge system just had a traditional BIOS.
I was fortunate to snag one of the Newegg ones that got flown in. Put the system together yesterday with an 1800X.
Going very well so far. No major issues, the system was left running overnight and it's still running now.
Biggest issue thus far: At least for me, I cannot alter memory speeds with the stock bios. Setting XMP makes it look like it's running my memory at 3200mhz, but according to benchmarking and CPUZ, it doesn't.
It would be interesting to compare a conservative 3.8GHZ Ryzen 7 with DDR4 2666MHz vs 4.06GHz Ryzen 7 DDR4 2852MHz that was overclocked via ~107MHz BCLK
Overclocking the base clock (BCLK) on AM4 platform is possible, however generally not recommended. This is due to its frequency relations with other interfaces, such as the PCIe. Unlike with Intel's more recent CPUs, there is no asynchronous mode (straps / gears) available, which would allow stepping down the PCIe frequency at certain intervals. The PCIe frequency relation is fixed and therefore it increases at the same rate with the BCLK. Gen. 3 operation can generally be sustained up to ~107MHz frequency and higher speeds will usually require forcing the links to either Gen. 2 or to Gen. 1 modes.
Makes sense! Although I've seen articles from feb featuring the board, never thought that it was just recently released!
Time to get some pictures up for then!
One thing I noticed it comes with 2 thermometers or thermosistors that can be connected to the board.
(Sorta noobish, but yeah this is sort of my first high end board)
EDIT: @Praetorr: how did you set up or attach the thermosistors are they near the cpu or somewhere in the case?
I do want to warn you do not install the creative sound pack if you play dota 2. It is causing massive fps loss. Without it i get around 110 fps with it i get only 30. Im gonna put a call in to them today to see if they can figure it out.
Anybody else have the debug LED constantly display code "56"? Manual says it's "invalid CPU type or speed," but my system has been running 24/7 for a few days now without a single hiccup.
I'm thinking it's just a normal part of using the stock F2 bios, but I'd love if anyone else could confirm/deny.
Edit: Those in the CPU megathread confirmed that this is happening with their Gigabyte Gaming 5's & K7's too.
Anybody else have the debug LED constantly display code "56"? Manual says it's "invalid CPU type or speed," but my system has been running 24/7 for a few days now without a single hiccup.
I'm thinking it's just a normal part of using the stock F2 bios, but I'd love if anyone else could confirm/deny.
Edit: Those in the CPU megathread confirmed that this is happening with their Gigabyte Gaming 5's & K7's too.
no issues here.... though i've only had my gaming 5 for two days now. mine shipped with f4 by default but i flashed f5d on my first post. mine shows 24. though i have noticed if i have the gigabyte siv software installed, my q code shows A0. it goes back to 24 once i uninstall the software. though the manual doesn't state what 24 is. my crosshair hero too showed 24.
Anybody else have the debug LED constantly display code "56"? Manual says it's "invalid CPU type or speed," but my system has been running 24/7 for a few days now without a single hiccup.
I'm thinking it's just a normal part of using the stock F2 bios, but I'd love if anyone else could confirm/deny.
Edit: Those in the CPU megathread confirmed that this is happening with their Gigabyte Gaming 5's & K7's too.
I got mine Monday. Works great so far, even on the stock bios. It did get stuck on post with error code A0 a couple times. A cold boot fixed it, thankfully. Will update bios soon hopefully.
So i have been running on the K7 since friday and there is some buggy firmware and software.
Do not believe the easy tune over clock. It says it applied but no other software can validate it. It shows it in the change settings in bios but doesnt apply properly in the bios so the software thinks it is running faster than it is.
Avoid the Soundblaster software as it has a bug in it to where it drops fps in games. dota 2 went from 110 down to 30 or lower with it installed and the only way to resolve is to reformat windows.
Memory speeds on ram can be stable i am running CMD32GX4M4C3200C14M though only 2 of the 4 sticks but it is running stable at 14-16-16-36 @3200
No. My SSD maxes out at 65C as a result of the GPU (without stressing the SSD itself). This is fine, as the fan from the GPU will prevent it from reaching insanely high temperatures by cooling it with exhaust air.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Ask a question
Ask a question
Overclock.net
27.8M posts
541.2K members
Since 2004
A forum community dedicated to overclocking enthusiasts and testing the limits of computing. Come join the discussion about computing, builds, collections, displays, models, styles, scales, specifications, reviews, accessories, classifieds, and more!