Originally Posted by outofmyheadyo
well i have the shuntmod it does nothing
I guess the real question here is what did you expect the shunt mod to do?
The shunt mod has one function, to rise the power limit so you don't downclock on power at least. Seems simple enough I know
but it may not give you anymore clk and is only going to be really beneficial to those on water that are power limited at undervolts. If you are pushing 2012 @ 1.093 its probably not going to help much.
Originally Posted by OneCosmic
I noticed that if you hit the power limit then the boost automatics tend to lower the clocks too much
I'm not sure if this is were people misunderstand the boost system, power limiting drops the "voltage" one or two... bins not clks, so if the next voltage bin is way lower clock then you see big drops. This is where optimising your curve comes in and raising the next voltage bin down one clock step can make a huge difference.
Decide what voltage/ clk you want to run, and make the curve flat after that. Then raise or optimise at least 3 voltage bins below that and see how that runs, if monitoring shows games are dropping low than that, then optimise a few more bins.