Originally Posted by Qba73
It's a knockoff AB and clunky at that, I installed only to change led and dumped it, fan curve doesn't even save. It gives you 3 presets or manual control but I got better results from AB 440 beta 6
Yep agreed. No one should be using the GB software. I even had problems configuring my LEDs with it.....MSI Afterburner should be used and the link to the latest beta is here:
Originally Posted by c0ld
Use this tutorial guys it's very helpful for explaining the voltage/curve graph. With this it will not downclock and stay relatively the same boost clock if you tweak this way.
Hope it helps
I'll try and play with it. I reckon it can get to 2100Mhz if I tweak it just right...
Originally Posted by Emmanuel
Using the latest beta Afterburner, if I set the voltage to +100 and power slider to 150%, the card will boost momentarily to 2025MHz (with 1.094v) and quickly get PerfCapped (Vrel) and clock down progressively to 1999MHz. How do my results compare to others? I have a hard time finding the posts of the guys with good cards hitting 2050MHz+.
Honestly, in my opinion, if your card is hovering around 2Ghz (even a bit under) you still have a good card! Everyone needs to understand that these are heavily overclocked out of the box. To push further really comes down to the silicon lottery. That is not to say that it is OK for it to be crashing out of the box...
That extra 50Mhz isn't going to really make any noticeable real world difference. I know you might be thinking it is easy for me to say who has a 'good' card, but I was only ever hopeful to clock to 2Ghz. Anything over was a bonus...