Overclock.net › Forums › Case Mods & Cases › Sponsored Builds & Case Mods › [Sponsored] Sesto Elemento (Bubble cooled)
New Posts  All Forums:Forum Nav:

[Sponsored] Sesto Elemento (Bubble cooled) - Page 3

post #21 of 25
Thread Starter 
dlMiupI.png

Updates


getting finishing touches done, while waiting for the reservoir to re-seal (Still not happy with it, but it'll have to do)

Changed the white on teh shroud to orange, added a top rght corner with aorus logo (i'll probably change that later to black and orange).
NZ3dgKy.jpg

Waiting for a few more things to arrive (RAM) and then i should be good to release final photo's, video and most importantly, results of the tests.
post #22 of 25
Thread Starter 
dlMiupI.png

Well.. loop is filled and running smooth.
Currently running with a 280mm radiator right now, as the i wait for the coolants to arrive which are now heavily overdue due to stock (mayhems pastel white)
post #23 of 25
Thread Starter 
The RAM is here! And by god is it pretty!
Fits this project perfectly, also look at how close the tube run is!
I had to adjust the height of the top run to squeeze in the RAM, but it's in now and working biggrin.gif

Specs: 2x8GB DDR4 @3000mhz
Team Group T-Force NightHawk RGB White



post #24 of 25
Thread Starter 


Sooo.... We ran into complications with the custom res and bubble cooling.
While it works 100% well with the CPU only, it really didn't like the 1080Ti included.
In fact, the reservoir split in the bottom after 4 hours of stress testing.

So i had to quickly re-think some things to get this project done as fast as possible.
While the idea for bubble cooling may be a bust, the design idea is still in play.

From Alphacool
The Eisbecher Lite 250mm reservoir










I'm using Mayhems pastel orange coolant for this

The NexXxoS XT45 420MM Radiator




And those fittings you see are the Alphacool Eiszapfen angled adaptor 90° rotatable

I changed out the legs to something much much better and more fitting.
But i'll reveal them later this week with the finished build.
post #25 of 25
Thread Starter 


Some final photo's before it travels oversea's
(I do realise now after taking photo's that the M.2 was not screwed in lol)













Will take more after show and have someone take some during the show smile.gif

2 Photo's with different lighting worth placing smile.gif



New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Sponsored Builds & Case Mods
Overclock.net › Forums › Case Mods & Cases › Sponsored Builds & Case Mods › [Sponsored] Sesto Elemento (Bubble cooled)