Overclock.net › Forums › Graphics Cards › AMD/ATI › R_Timings - Encode/Decode RX/R9 Memory Straps
New Posts  All Forums:Forum Nav:

R_Timings - Encode/Decode RX/R9 Memory Straps - Page 2

post #11 of 39
what is the procedure to use ohgodadecode for R9 290 bios I see diffrent timings when I compare ohgodadecode and R_Timings_R9

ohgodadecode - FFF1332000000000AD495930705509102D23E9030068C30022AA1C08640F1420BA8980A7000007C01914262B512E3E13

TRCDW=16 TRCDWA=11 TRCDR=21 TRCDRA=18 TRRD=0 TRC=16 Pad0=0

TNOPW=1 TNOPR=3 TR2W=18 TCCDL=1 TR2R=2 TW2R=9 Pad0=7 TCL=3 Pad1=0

TRP_WRA=0 TRP_RDA=80 TRP=13 TRFC=12 Pad0=0

PA2RDATA=2 Pad0=0 PA2WDATA=2 Pad1=0 TFAW=10 TCRCRL=5 TCRCWL=28 TFAW32=0

MC_SEQ_MISC1: 0x20140F64
MC_SEQ_MISC3: 0xA78089BA
MC_SEQ_MISC8: 0xC0070000

ACTRD=25 ACTWR=20 RASMACTRD=38 RASMACTWR=43

RAS2RAS=81 RP=46 WRPLUSRP=62 BUS_TURN=19


####SEQ_WR_CTL_D1####
DAT_DLY = 15
DQS_DLY = 15
DQS_XTR = 1
DAT_2Y_DLY = 0
ADR_2Y_DLY = 0
CMD_2Y_DLY = 0
OEN_DLY = 15
OEN_EXT = 3
OEN_SEL = 3
ODT_DLY = 0
ODT_EXT = 0
ADR_DLY = 1
CMD_DLY = 0
####SEQ_WR_CTL_2####
DAT_DLY_H_D0 = 0
DQS_DLY_H_D0 = 0
OEN_DLY_H_D0 = 0
DAT_DLY_H_D1 = 0
DQS_DLY_H_D1 = 0
OEN_DLY_H_D1 = 0
WCDR_EN = 0
####SEQ_PMG_TIMING####
TCKSRE = 2
TCKSRX = 2
TCKE_PULSE = 10
TCKE = 10
SEQ_IDLE = 7
TCKE_PULSE_MSB = 0
SEQ_IDLE_SS = 8
####SEQ_RAS_TIMING####
TRCDW = 13
TRCDWA = 13
TRCDR = 18
TRCDRA = 18
TRRD = 5
TRC = 48
####SEQ_CAS_TIMING####
TNOPW = 0
TNOPR = 0
TR2W = 23
TCCDL = 2
TR2R = 5
TW2R = 9
TCL = 16
####SEQ_MISC_TIMING####
TRP_WRA = 45
TRP_RDA = 35
TRP = 18
TRFC = 62
####SEQ_MISC_TIMING2####
PA2RDATA = 0
PA2WDATA = 0
TFAW = 8
TCRCRL = 3
TCRCWL = 3
TFAW32 = 6
TWDATATR = 0
####ARB_DRAM_TIMING####
ACTRD = 25
ACTWR = 20
RASMACTRD = 38
RASMACTWR = 43
####ARB_DRAM_TIMING2####
RAS2RAS = 81
RP = 46
WRPLUSRP = 62
BUS_TURN = 19
####MC_SEQ_MISC####
MC_SEQ_MISC1 = 0x20140F64
MC_SEQ_MISC3 = 0xA78089BA
MC_SEQ_MISC8 = 0xC0070000
post #12 of 39
Thread Starter 
Quote:
Originally Posted by mirzet1976 View Post

what is the procedure to use ohgodadecode for R9 290 bios I see diffrent timings when I compare ohgodadecode and R_Timings_R9

ohgodadecode - FFF1332000000000AD495930705509102D23E9030068C30022AA1C08640F1420BA8980A7000007C01914262B512E3E13

Did you use win or linux? Did you compiled your ohgodadecode ? If not which binary are you using?
post #13 of 39
post #14 of 39
Thread Starter 
Quote:
Originally Posted by mirzet1976 View Post

win10, not compiled , I have used this your ohgodadecode http://www.overclock.net/t/1604567/polaris-bios-editing-rx5xx-rx4xx/2610#post_26047123

That OhGodADecode binary is compiled to support timing strap that comes from RX series (Polaris) GPU
post #15 of 39
OK, and now how to use it for the R9 series GPU, can you write the procedure.
post #16 of 39
Thread Starter 
Quote:
Originally Posted by mirzet1976 View Post

OK, and now how to use it for the R9 series GPU, can you write the procedure.
Multiple solutions:
- Use this tool instead
- Compile OhGodADecode with R9 strap support (add -DSTRAP_R9=1 when you compile it)
- Wait for me to go home and I'll compile it for youy
post #17 of 39
I'll wait for you , thank U.thumb.gif
post #18 of 39
You mention "OhGodAPet" in the OP. I could be wrong, but believe you might mean @wolf9466
post #19 of 39
Thread Starter 
Quote:
Originally Posted by bardacuda View Post

You mention "OhGodAPet" in the OP. I could be wrong, but believe you might mean @wolf9466

I copied the "OhGodACompany - OhGodAGirl & OhGodAPet" from the source, if @wolf9466 is OhGodAPet i'll change the first post biggrin.gif@OhGodAGirl can you confirm?
post #20 of 39
Quote:
Originally Posted by bardacuda View Post

You mention "OhGodAPet" in the OP. I could be wrong, but believe you might mean @wolf9466

That is me - I go by OhGodAPet a lot now.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD/ATI
Overclock.net › Forums › Graphics Cards › AMD/ATI › R_Timings - Encode/Decode RX/R9 Memory Straps