Originally Posted by Dasboogieman
OK despite the cooling, your SeaHawkX is basically an FE PCB with FE components. This means anything that is compatible with the FE should theoretically be compatible with yours. Though as a precaution since you have a DVI port. Make sure you have backup monitor cables around so just in case the FTW3 takes out a monitor port that you have a way to get visuals up again. As always you do this at your own risk.
thank you for this, flash the ftw3 bios and the card clocks are much more stable now, have it working great at 2050mhz and +550 oc on the memory clocks. temperatures does not get past 43c (room temp 20c)
Originally Posted by Jbravo33
good choice, but one word of advise power down your PC, unplug it and CLEAN THE DAMN THING!!! No Ti deserves to be in a dirty environment like that. its just not fair!!!!
was afraid of one of these comments
didn't bother to thoroughly clean prior to installing the sea hawk, however a full cleaning and detailing is due this weekend...